Skip to content

zenotech/paraview-superbuild

Repository files navigation

ParaView-Superbuild

Introduction

ParaView-Superbuild, henceforth referred to as "superbuild", is a project to build ParaView and its dependencies. ParaView itself can be easily built using CMake as long as the required external dependencies are available on the build machine. However, ParaView's several external dependencies, e.g. Qt, CGNS, FFMPEG, etc. can be very tedious to build. Also, if you want to generate redistributable binaries, you need to take extra care when building and packaging these dependencies. To make our lives easier in supporting both these use-cases, the superbuild project was born.

Although primarily designed to build the official ParaView binaries, the superbuild has since been regularly used to build and install ParaView on various supercomputing systems.

Obtaining the source

To obtain the superbuild source locally, clone this repository using Git.

$ git clone --recursive https://gitlab.kitware.com/paraview/paraview-superbuild.git

Building

The superbuild can be built with a Makefiles or Ninja CMake generator. The IDE generators (Xcode and Visual Studio) are not supported.

Requirements

The superbuild tries to provide all of its own dependencies, but some tooling is assumed to be available on the host machine.

  • Compiler toolchain
    • GCC 4.9 or newer
    • Xcode 10 or newer (older is probably supported, but untested)
    • MSVC 2017 or newer
    • ICC (minimum version unknown)
  • Tools
    • pkg-config is used on non-Windows platforms to find dependencies in some projects
    • ninja (or make) for building
    • Python (if not built by the superbuild) for building packages
    • If building mesa or osmesa, bison and flex are required.
    • If building packages on Linux, chrpath or patchelf is required to make relocatable packages

Building a specific version

The superbuild project uses the same versioning scheme as ParaView, and gets tagged for every release of ParaView. For example, to build ParaView version 5.7.1, checkout the v5.7.0 tag of ParaView and superbuild.

Currently available tags are shown here.

To checkout a specific tag from the superbuild git repository:

$ cd paraview-superbuild
$ git fetch origin # ensure you have the latest state from the main repo
$ git checkout v5.7.0 # replace `v5.7.0` with tag name of your choice
$ git submodule update

At this point, your superbuild has all of the rules that were used when building the selected version of ParaView. Also, note that it's possible to build a version of ParaView using a different superbuild version. For example, you could use superbuild v5.7.0, to build the latest master (i.e., development) version of ParaView, or a custom branch. This is done by first checking out the superbuild for the appropriate version and then setting the CMake variables that affect which ParaView source is to be used. There are several ways to control how superbuild finds its source packages:

  1. If you want to use git to checkout ParaView source (default), then set paraview_SOURCE_SELECTION to git, ensure paraview_GIT_REPOSITORY is pointing to the ParaView git repository you want to clone (by default it is set to the offical ParaView repository) and then set the paraview_GIT_TAG to be a specific tagname or branch available for the selected git repository. Use master for latest development code, v5.7.0 for the 5.7.0 release, release for latest stable release, or a specific ParaView commit SHA. In this setup, when building the superbuild, it will clone and checkout the appropriate revision from the ParaView git repository automatically.
  2. Instead of letting superbuild do the cloning and updating of the ParaView source, you can also manually check it out and keep it updated as needed. To use this configuration, set paraview_SOURCE_SELECTION to source, and set paraview_SOURCE_DIR to point to a custom ParaView source tree. See 'offline builds' below for instructions to download needed dependency packages.
  3. Another option is to use a source tarball of a ParaView release. For that, set paraview_SOURCE_SELECTION to the version to build such as 5.7.0. The superbuild offers the lastest stable release as well as release candidate in preparation for the release. This is the best way to build a released version of ParaView.

NOTE: If you switch to a superbuild version older than 5.2, the instructions described on this page are not relevant since the superbuild was refactored and changed considerably for 5.2. For older versions, refer to instructions on the Wiki.

ALSO NOTE: Since this README is expected to be updated for each version, once you checkout a specfic version, you may want to refer to the README for that specific version.

Incremental builds

The superbuild is kind of naïve for changes to project sources within the superbuild. This is due to the superbuild not tracking all source files for each project and instead only "stamp files" to indicate the steps performed.

When changing the source of a subproject, the best solution is to delete the "stamp file" for the build step of that project:

$ rm superbuild/$project/stamp/$project-build

and to rerun the superbuild's build step.

Projects and Features

The superbuild contains multiple projects which may be used to enable different features within the resulting ParaView build. Most projects involve downloading and adding the feature to the resulting package, but there are a few which are used just to enable features within ParaView itself.

The paraview project must be enabled to build ParaView.

The paraviewsdk project enables the building of a package which includes headers and libraries suitable for developing against ParaView. It is only available on Linux (at the moment).

The paraviewweb project adds web services into the resulting package.

The paraviewgettingstartedguide, and paraviewtutorialdata packages add startup documentation and example data to the package.

ParaView supports multiple rendering engines including egl, mesa, osmesa, and qt5. All of these are incompatible with each other. If none of these are chosen, a UI-less ParaView will be built (basically just pvpython). On Windows and macOS, only the qt5 rendering engine is available.

The python package is available to enable Python support in the package. In addition, the matplotlib and numpy packages are available.

The following packages enable other features within ParaView:

  • adios: Enable readers and writers for visualization data in the ADIOS file format.
  • las: Enable reading the LAS file format
  • cosmotools: Enables Cosmo file format readers and related filters and algorithms.
  • ffmpeg: Video encoding library for macOS and Linux.
  • ospray: A ray tracing rendering backend from Intel.
  • silo: Support reading the silo file format.
  • tbb: Improved parallel processing support within various VTK and ParaView filters and algorithms.
  • visitbridge: Enables readers for file formats provided from the VisIt project.
  • vortexfinder2: A collection of tools to visualize and analyze vortices.
  • vrpn: Virtual reality support through the VRPN interface.
  • vtkm: VTK-m Accelerator Filters
  • xdmf3: A meta file format built on top of HDF5.

Offline builds

The superbuild has a download-all target that will download all of the files from the network that are necessary for the currently configured build. By default, they are placed into the downloads directory of the build tree. This superbuild-plus-downloads tree may then be copied to a non-networked machine and pointed at using the superbuild_download_location variable (or placed in the default location).

Note that the nvidiaoptix and nvidiamdl project sources are not available at their URLs in the superbuild outside of Kitware due to their sources being behind click-wrapping. They may be manually downloaded from these web pages:

Overriding downloaded archives

On rare occasions, you may want to replace a downloaded archive with a different version. You may replace the archive with a newer version preserving its name, however, on doing so, the hash verification will most likely fail during the build step. To skip the hash verification for archives that have been manually changed, set the xxx_SKIP_VERIFICATION option, where xxx is the name of the project. xxx_SKIP_VERIFICATION must be passed on command line when invoking CMake using -Dxxx_SKIP_VERIFICATION:BOOL=TRUE.

Alternatively, you can edit the versions.cmake files in the source repository and modify the URL_MDF5 or URL_HASH values for the specific project with updated hashes.

Installing

The superbuild supports the install target by selecting a template package using the SUPERBUILD_DEFAULT_INSTALL variable. The default and availability depends on the platform and selected projects, but valid values for this include:

  • paraview/ZIP
  • paraview/DragNDrop
  • paraview/TGZ
  • paraview/TXZ
  • paraviewsdk/TGZ
  • paraviewsdk/TXZ

The CMake cache editors (ccmake and cmake-gui) have dropdown options for the supported options.

The selected package logic will be used to install ParaView and its dependencies into CMAKE_INSTALL_PREFIX rather than being placed into a package. For example, the DragNDrop generator creates .app bundles which will be created whereas the TGZ, TXZ, and ZIP generators use the standard bin/, lib/, etc. directories.

Caveats

If using the git source selection for ParaView, the build will rerun when using the install target due to limitations in the external project mechanisms and the way CPack works. There are two ways to avoid this:

  • the SUPERBUILD_OFFLINE_BUILD option may be set to ON to unlink the git update step from the configure/build steps; or
  • the initial build can just be run using the install target instead of the usual make && make install pattern.

CMake Variables

Style Guide

Note that currently not all project and configuration variables follow this style guide but any new projects should use this convention while any existing projects and configuration variables will transition to this over time.

  • All references to a given project name will be lowercase.
  • Underscores will be used as word seperators in variable names.
  • All project specific configuration variables will be lower-case project name followed by upper-case setting name. Examples include:
    • mesa_USE_SWR : Enable the OpenSWR driver for (OS)Mesa.
    • ospray_BUILD_ISA : Select the SIMD architecture used to build OSPray.
  • Internal variables used within a given project's projectname.cmake file will be all lower-case.
  • Multiple versions:
    • Use the superbuild_set_selectable_source macro to allow multiple versions of a given project.
    • Specify source selection versions as numeric, i.e. without any "v" or "V" prefix.
    • If the project is going through a release candidate cycle, add the available RCs as additional sources as they become availabe. Once a final release is made, replace all the RCs with the updated release.

Build Variables

  • superbuild_download_location (default ${CMAKE_BINARY_DIR}/downloads): The location to store downloaded source artifacts. Usually, it is changed so that it is preserved across a wipe of the build directory.
  • SUPERBUILD_PROJECT_PARALLELISM (default based on the number of available processors): When using a Makefiles generator, subproject builds use -j explicitly with this number.
  • ENABLE_xxx (generally, default OFF): If selected, the xxx project will be built within the superbuild. See above for descriptions of the various projects. ENABLE_ flags are not shown for projects which must be enabled due to a project depending on it (e.g., visitbridge requires boost, so enabling visitbridge will hide the ENABLE_boost option).
  • USE_SYSTEM_xxx (default OFF): If selected, the xxx project from the build environment is used instead of building it within the superbuild. Not all projects support system copies (the flag is not available if so).
  • SUPERBUILD_DEBUG_CONFIGURE_STEPS (default OFF): If set, the superbuild will log configure steps for each xxx project into superbuild/xxx/stamp/xxx-configure-*.log files.
  • CMAKE_BUILD_TYPE (default Release): The build type to use for the build. Can be Release, RelWithDebInfo, or (on not-Windows) Debug.
  • Due to complications around shipping OpenSSL in the binaries, OpenSSL requires explicit settings in the build. They are -DALLOW_openssl:BOOL=ON -DENABLE_openssl:BOOL=ON.
  • paraview_always_package_scipy (default OFF): Force packaging scipy on Windows installer generators. Other generators do not have issues with long paths and will always try to include scipy.

The following flags affect ParaView directly:

  • paraview_SOURCE_SELECTION (default 5.12.0-RC1): The source to use for ParaView itself. The version numbers use the source tarballs from the website for the release. The source selection uses the paraview_SOURCE_DIR variable to look at a checked out ParaView source directory. The git selection has the superbuild clone and builds a checkout of ParaView from git repository controlled by the paraview_GIT_REPOSITORY and paraview_GIT_TAG variables. By default, the master branch of the main repository is used.

    Note: When using the source selection, incremental builds to the superbuild may not rebuild ParaView even if the source tree has changed. This is because the superbuild is "blind" to the source tree other than its existence.

  • CMAKE_BUILD_TYPE_paraview (default is the same as the superbuild): ParaView may be built with a different build type (e.g., Release vs. RelWithDebInfo) as the rest of the superbuild using this variable. In addition to <SAME> which uses CMAKE_BUILD_TYPE, any valid value for CMAKE_BUILD_TYPE is also valid.

  • BUILD_SHARED_LIBS_paraview (default is the same as the superbuild): ParaView may be built with a different selection for BUILD_SHARED_LIBS flag than the rest of the superbuild using this variable. For example, to build ParaView static while building other projects in the superbuild (e.g. MPI, Python, etc.) as shared, set BUILD_SHARED_LIBS to ON and BUILD_SHARED_LIBS_paraview to OFF.

  • PARAVIEW_BUILD_WEB_DOCUMENTATION (default OFF): Have ParaView build its HTML documentation.

  • mesa_USE_SWR (default ON): If mesa is enabled, this enables Intel's software rasterization backend (x86 only).

  • PARAVIEW_INITIALIZE_MPI_ON_CLIENT (default ON): If mpi is enabled, this enables MPI to be initialized automatically when running the GUI or pvpython. Some readers use MPI IO and thus must have MPI initialized in order to be used so this is the default for general ease of use. For some MPI implementations, a code that initializes MPI must be run with the appropriate mpi launcher (e.g. mpirun) which in this case it may be desirable to disable this option. Note that the --mpi or --no-mpi command line options to paraview and pvpython can be used to override this option.

  • PARAVIEW_EXTRA_CMAKE_ARGUMENTS (default "": Extra CMake arguments to pass to ParaView's configure step. This can be used to set CMake variables for the build that are otherwise not exposed in the superbuild itself. Arguments should be separated with ;.

  • PARAVIEW_ENABLE_CAVEInteraction (default ON): Enables the CAVEInteraction. If vrpn is enabled, the CAVEInteraction will support input devices through a VRPN connection. VRUI support is enabled unconditionally on Linux.

  • PARAVIEW_ENABLE_NODEEDITOR (default ON): Enables the NodeEditor plugin.

  • PARAVIEW_ENABLE_XRInterface (default ON): Enables the XRInterface plugin.

ParaView editions

A typical ParaView build includes several modules and dependencies. While these are necessary for a fully functional application, there are cases (e.g. in situ use-cases) where a build with limited set of features is adequate. ParaView build supports this using the PARAVIEW_BUILD_EDITION setting. Supported values for this setting are:

  • CORE: Build modules necessary for core ParaView functionality. This does not include rendering.
  • RENDERING: Build modules necessary for supporting rendering including views and representations. This includes everything in CORE.
  • CATALYST: Build all modules necessary for in situ use cases without rendering and optional components like NetCDF- and HDF5-based readers and writers.
  • CATALYST_RENDERING: Same as CATALYST but with rendering supported added.
  • CANONICAL (default): Build modules necessary for standard ParaView build.

Packaging Variables

  • PARAVIEW_PACKAGE_SUFFIX (default based on selected options): The suffix for the name generated by the package.
  • paraview_PLUGINS_AUTOLOAD: List of plugins to autoload in the packaged ParaView.

Packaging

The packages may be built using the cpack-paraview tests via ctest. The easiest way to build all available packages is to run ctest -R cpack.

Caveats

Even though almost all dependencies are bundled into the final package, there are still some libraries that should be present on the user OS. Namely :

  • a valid OpenGL implementation (GPU driver or Mesa)
  • for Linux systems :
    • libxcb
    • libxi
    • libxkbcommon
    • libxrender
    • alsa (only if using the Audio Player docker from the DSP ParaView plugin)

Learning Resources

Reporting Bugs

If you have found a bug:

  1. If you have a patch, please read the CONTRIBUTING.md document.

  2. Otherwise, please join one of the ParaView Mailing Lists and ask about the expected and observed behaviors to determine if it is really a bug.

  3. Finally, if the issue is not resolved by the above steps, open an entry in the ParaView Issue Tracker.

License

Like ParaView, ParaView-Superbuild is distributed under the OSI-approved BSD 3-clause License. See Copyright.txt for details. For additional licenses, refer to ParaView Licenses.

Contributing

See CONTRIBUTING.md for instructions to contribute.