Skip to content

PCRaster implementation of simple recharge model applied to a test case in Arusha, Tanzania

Notifications You must be signed in to change notification settings

vcantarella/arusha_recharge

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

1 Commit
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Introduction

The present report summarizes the calculations and assumptions taken to model recharge in Arusha, Tanzania, in under different landuse and climate conditions. We briefly discuss the results with emphasis for adaptation under climate change.

The available data includes:

  • one precipitation station with one year of precipitation values, year 2020
  • one evapotranspiration station with one year o reference evapotranspiration values, year 2020
  • land use map for the years 1995, 2020 and 2050.
  • soil map
  • simple transformation for precipitation (higher intensity, less frequency) and evapotranspiration (higher intensity) for the year 2050.
  • annual runoff per land use values used for calibration.

Basic Assumptions

The recharge model is based on a simplified version of the Water Balance Model and it is an implementation of the recharge excel workbook model(Nonner & Stigter, 2015) The report is an adaptation to the one submitted for completion of IHE lecture in Groundwater and Climate Change. The novelty of this project is the adaptation of the class excel worksheet to PCRaster (Karssenberg et al. 2010) framework.

The framework allows the implementation of distributed model with speed. In comparison to the class assignment, where each class must be computed in a new worksheet, here everything is done seemslesly in one script.

The integration in the python environment and open source community also allow us to use the full output for spatial analysis and further modelling, such as integration with groundwater modelling.

The model is built on top of the Dynamic Model framework from PCRaster (Karssenberg et al. 2010) and it is available in the script: dynamic_model.py.

The parameters used as input are detailed below.

Parameters

We have estimated parameters for the water balance model comparing the available land-use and soil classifications with data from the literature.

Additionally, we have calibrated the runoff threshold parameter with the runoff per land-use data supplied in the assignment.

Available water

The total available water parameter was estimated based on the paper (Romano and Santini 2002), where a graph of field capacity and permanent wilting point for various soils are present.

The available water is estimated by the expression:

A**W = F**C − W**P

where A**W is the available water, F**C is the field capacity and W**P is the wilting point. All units are fractions of the soil volume.

The estimated results are the following:

## Rows: 2 Columns: 2

## -- Column specification ---------------------------------------
## Delimiter: " "
## dbl (2): X1, X2

## 
## i Use `spec()` to retrieve the full column specification for this data.
## i Specify the column types or set `show_col_types = FALSE` to quiet this message.
Soil Type soil code Available Water
Sandy Clay 10 0.13
Silty Sand 11 0.12

Available water table

Initial TAW

For the start of the simulation, the initial water content in every cell was 50% of the TAW for that cell.

Soil Root Depth

In our simplified unsaturated soil water balance model, the soil is modeled only down to the maximum root depth of each vegetation. Water that is driven below that depth is computed as groundwater recharge.

The depths were assigned to each landuse based on values tabulated in the Wetspass-M model (Abdollahi et al. 2017). Table @ref:(tab:tab-root) contains the estimations.

## Rows: 7 Columns: 2

## -- Column specification ---------------------------------------
## Delimiter: " "
## dbl (2): X1, X2

## 
## i Use `spec()` to retrieve the full column specification for this data.
## i Specify the column types or set `show_col_types = FALSE` to quiet this message.
Land Use Type land use code Root Depth (mm)
Urban 1 300
Agriculture 21 1000
Deciduous forest 31 1000
Coniferous tree 32 1000
Mixed forest 33 1000
Shrub/Grassland 36 600
Sparsely vegetated 307 100

Root depth for every Land Use

Crop factor

Crop factor is the parameter for calculating the potential evapotranspiration of each land-use, based on the supplied reference evapotranspiration. According to (Allen et al. 1998), the expression for the calculation is:

PET = Kc * RET PET: Potential Evapotranspiration

K**c: Crop factor RET: Reference Evapotranspiration

Values were estimated based on the values tabulated in Wetspass-M (Abdollahi et al. 2017) and values in the FAO guidelines for the Penman-Monteith model (Allen et al. 1998). The results are in the Table @ref(tab:crop-tab).

## Rows: 7 Columns: 2

## -- Column specification ---------------------------------------
## Delimiter: " "
## dbl (2): X1, X2

## 
## i Use `spec()` to retrieve the full column specification for this data.
## i Specify the column types or set `show_col_types = FALSE` to quiet this message.
Land Use Type land use code Crop Coef.
Urban 1 0.6
Agriculture 21 1.5
Deciduous forest 31 1.3
Coniferous tree 32 1.2
Mixed forest 33 1.2
Shrub/Grassland 36 1.0
Sparsely vegetated 307 0.9

Crop factor values adopted for each landuse type in the model

Readily Available Water

According to (Allen et al. 1998), evapotranspiration under water-stress conditions can be modelled by the readily available water (RAW), which is used to calculate the water stress coefficient (Figure @ref(fig:ks)).

Water stress coefficient as a function of soil water (Allen et al. 1998)

In the PCRaster Recharge model, the water stress coefficient is modelled indirectly, as the assigment’s excel sheet, using the RAW parameter.

The RAW parameter is estimated as 50 % of the TAW for all soil and land-use types. This estimation is a common value for many crops (Allen et al. 1998)

Runoff threshold

In the model, runoff refers to the overland flow from precipitation.

The runoff is modelled by a threshold for precipitation intensity. The model assigns precipitation that exceeds a given threshold as runoff. Rainfall below the threshold infiltrates the soil zone.

Values for threshold were calibrated for each land use by running the model in 2020 and verifying the model runoff to the given values. Here we use PCRaster for analysis of the total runoff of each land use. The table with calibrated and given values is displayed below.

## Rows: 7 Columns: 2

## -- Column specification ---------------------------------------
## Delimiter: " "
## dbl (2): X1, X2

## 
## i Use `spec()` to retrieve the full column specification for this data.
## i Specify the column types or set `show_col_types = FALSE` to quiet this message.

## New names:
## * `` -> ...1

## Rows: 7 Columns: 8

## -- Column specification ---------------------------------------
## Delimiter: ","
## chr (2): Land_Use, Unnamed: 0
## dbl (6): ...1, Runoff, No, Avg (mm/y), Min (mm/y), Max (mm/y)

## 
## i Use `spec()` to retrieve the full column specification for this data.
## i Specify the column types or set `show_col_types = FALSE` to quiet this message.
Land Use Type land use code Runoff Threshold (mm) Runoff-measured Avg runoff (mm) Min runoff (mm) Max runoff (mm)
Urban 1 5.0 419.1 429.3 35.6 670.5
Agriculture 21 7.0 295.3 325.3 30.8 704.2
Deciduous forest 31 8.5 224.1 229.5 30.9 674.5
Coniferous tree 32 9.0 203.3 218.6 33.4 549.7
Mixed forest 33 9.5 184.3 192.7 28.9 494.4
Shrub/Grassland 36 8.5 224.1 229.4 33.0 621.0
Sparsely vegetated 307 8.5 224.1 235.2 10.2 646.6

Runoff Threshold parameters for each landuse type in the model

Tasks

We will now procede by answering the assignment’s questions.

Recharge estimation as function of land use change

## Rows: 4 Columns: 2

## -- Column specification ---------------------------------------
## Delimiter: ","
## dbl (2): Year, Recharge (mm)

## 
## i Use `spec()` to retrieve the full column specification for this data.
## i Specify the column types or set `show_col_types = FALSE` to quiet this message.
Year Recharge (mm)
1995 58.79
2020 58.83
2035 50.19
2050 48.90

Recharge as function of the predicted land use change

The results for the recharge indicate little variation due to change in land use for the Arusha catchment. This is related to the fact that the recharge calculated by urban areas is not very different from the recharge of areas with poor vegetation and agriculture.

This behaviour of the model is due to the fact that the urbanization in Arusha, from interpretation of the aerial photographs, does not cause significant impermeabilization of the soil, except for the highly urbanized downtown. Much of the city area is located under unpaved roads and houses with clear terrain. Therefore, expansion of the city only alters recharge slightly.

Recharge Estimation Under Climate Change

## Rows: 2 Columns: 2

## -- Column specification ---------------------------------------
## Delimiter: ","
## dbl (2): Year, Recharge (mm)

## 
## i Use `spec()` to retrieve the full column specification for this data.
## i Specify the column types or set `show_col_types = FALSE` to quiet this message.
Year Recharge (mm)
1995 58.79
2050 21.35

Recharge as function of the predicted land use change and climate change

We see a large numerical difference between the values from Table @ref(tab:rech-lan) and Table @ref(tab:rech-lan-clim). This is due to the lower threshold in the Urban Area. Since the Urban area has limited infiltration capacity, the heavy rainfall predicted under climate change will mainly generate runoff, and it will impact groundwater recharge.

Water abstractions compared with groundwater recharge

The assignment assigns a population growth model of 1.5 % per year for the calculation of the abstraction demand. This can be represented by the formula below:

P2020 * (1+0.015)nyears

Where P2020 is the population in 2020 and nyears is the number of years in 2020 and in 2050.

Therefore we have a population and water demands for 1995, 2020 and 2050:

## Rows: 3 Columns: 6

## -- Column specification ---------------------------------------
## Delimiter: ","
## dbl (6): Year, Population, Net Abstraction (Mm3), Abs per U...

## 
## i Use `spec()` to retrieve the full column specification for this data.
## i Specify the column types or set `show_col_types = FALSE` to quiet this message.
Year Population Net Abstraction (Mm3) Abs per Urban Cell (mm) Recharge (mm) Percentage of Recharge Abstracted (%)
1995 223302.7 1.71 94.83 58.79 0
2020 324000.0 1.94 26.09 58.83 0
2050 506438.0 2.36 18.62 21.35 0

Net Abstraction Calculations and Comparison to Recharge

Table @ref(tab:net-abs) summarises the calculated net abstractions and derived quantities. The results suggests that abstraction is sustainable, as the rates are very low compared to recharge.

Another interesting result from Table @ref(tab:net-abs) is that although the Net abstraction is increasing, the expansion of the city is increasing at a higher rate, and the overall results is a decrease in abstraction per cell.

Groundwater Drop due to change in Steady-state conditions

To estimate the groundwater drop due to urbanization and climate-change, a few assumptions were made.

  • The current scenario, in 2020 is in steady-state. This is necessary for the simplified assumption in the next step.

  • The scenario in 2050 is the endmember scenario and the change in groundwater fluxes is linear with time. This means that we can compute the fluxes from initial scenario and from the last scenario and the average change in storage per year will be half of the difference between those fluxes. Multiplying by the number of years we get the change in storage:

$$ \Delta S = \frac{GW_{2050}-GW_{2020}}{2}*t_{years} $$

  • The groundwater fluxes inside the aquifer are ignored

  • The groundwater drop was calculated as the initial groundwater heads in 2020 plus the change in storage in m of aquifer.

Headsfinal = Headsinitial + Δ**S/S**y

## C:\Users\vcant\anaconda3\envs\qgispcraster\lib\site-packages\pcraster\matplotlib.py:154: MatplotlibDeprecationWarning: The 'cmap' parameter to Colorbar has no effect because it is overridden by the mappable; it is deprecated since 3.3 and will be removed two minor releases later.
##   cb = plt.colorbar(im, cmap=colour)

Estimated Drop in groundwater heads, in meters

## The predicted average change in groundwater heads in the 30 year period (2020-2050) is of    -24 meters

The figure @ref(fig:drop-hed) shows the predicted head drop in meters for the Arusha aquifer. The major drops are related to areas where new cities are predicted, with values around 50 m. In the current city the drop is predicted to around 25 m, while in the natural landscape, to - 10 m.

The maps shows the importance of managing the land for groundwater. Unrestricted growth will severely impact groundwater heads, specially in the urban area.

The average head drop predition is of 24 meters.

Sustainability of Abstractions

As seen in the table @ref(tab:net-abs), abstractions are very low compared to recharge. Therefore, I would conclude the abstractions are sustainable.

On the other hand, the unplanned expansion of the Urban Area pose a major threat to sustainability, as the recharge will be severely impacted, specially under climate change scenarios.

Abdollahi, Khodayar, Imtiaz Bashir, Boud Verbeiren, Mahamane R. Harouna, Ann Van Griensven, Marijke Huysmans, and Okke Batelaan. 2017. “A Distributed Monthly Water Balance Model: Formulation and Application on Black Volta Basin.” Journal Article. Environmental Earth Sciences 76 (5): 1–18. https://doi.org/http://dx.doi.org/10.1007/s12665-017-6512-1.

Allen, Richard G, Luis S Pereira, Dirk Raes, and Martin Smith. 1998. “Crop Evapotranspiration-Guidelines for Computing Crop Water Requirements-FAO Irrigation and Drainage Paper 56.” Journal Article. Fao, Rome 300 (9): D05109.

Karssenberg, Derek, Oliver Schmitz, Peter Salamon, Kor de Jong, and Marc F. P. Bierkens. 2010. “A Software Framework for Construction of Process-Based Stochastic Spatio-Temporal Models and Data Assimilation.” Journal Article. Environmental Modelling & Software 25 (4): 489–502. https://doi.org/https://doi.org/10.1016/j.envsoft.2009.10.004.

Romano, Nunzio, and Alessandro Santini. 2002. “Water Retention and Storage: Field.” Book Section. In, 721–38.

About

PCRaster implementation of simple recharge model applied to a test case in Arusha, Tanzania

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages