Skip to content

tommyettinger/textratypist

Repository files navigation

TextraTypist

Animated preview

A text-display library centered around a label that prints over time, with both effects and styles.

In other words, this brings more features to text rendering in libGDX.

What does this look like? A little something like this...

Still preview

Or perhaps like this...

Animated preview

If you'd rather watch a video than read this text, Raymond "raeleus" Buckley made a video covering most of TextraTypist! It covers some things this file doesn't, such as usage of Skin Composer, so it's a good watch regardless.

It's got labels!

There's a "normal" label here in the form of TextraLabel, which acts almost exactly like Label in scene2d.ui, but allows the styles covered below. A lot of usage may prefer TypingLabel, though!

TypingLabel is a fairly normal scene2d.ui widget, and extends TextraLabel. However, it puts letters up on the screen one at a time, unless it is told to skip ahead. This is a nostalgic effect found in many older text-heavy games, and it looks like a typewriter is putting up each letter at some slower-than-instantaneous rate.

It's got effects!

Yes, it has more than the typewriter mode! Text can hang above and then drop into place. It can jump up and down in a long wave. It can waver and shudder, as if it is sick. It can blink in different colors, move in a gradient smoothly between two colors, or go across a whole rainbow. Lots of options; lots of fun. Effects are almost the same as in typing-label, but there have been some changes and additions. You can check the TextraTypist wiki for more information.

As of 0.10.0, there are many new effects. Jolt, Spiral, Spin, Crowd, Shrink, Emerge, Heartbeat, Carousel, Squash, Scale, Rotate, Attention, Highlight, Link, Trigger, Stylist, Cannon, Ocean, Sputter, and Instant are all new to TextraTypist (not in typing-label). You can see usage instructions and sample GIFs at the TextraTypist wiki's Tokens page. Most of these effects make use of the smooth scaling and rotation options that effects can use starting in TextraTypist 0.5.1 . Some make use of mouse tracking, new in 0.7.0, such as how Link only responds to a click on a range of text.

You may want to create TypingLabels even where you don't need the typing effect, because TextraLabel doesn't handle any effects. You can call skipToTheEnd() on a TypingLabel or (in 0.7.0 and up) on some other classes to allow a TypingLabel to be used for still text with effects.

Various standard tokens are also present, and these can manipulate the typing effect, variable replacement, and other useful things:

  • {WAIT=f} causes the typing effect to pause and wait for f seconds, as a float.
  • {SPEED=f} changes the time it takes to type a typical glyph, from a default of 0.035 to f.
  • {SLOWER} makes all glyphs take 2x as long to type.
  • {SLOW} makes all glyphs take 1.5x as long to type.
  • {NORMAL} makes all glyphs take the normal 1x as long to type.
  • {FAST} makes all glyphs take 0.5x as long to type.
  • {FASTER} makes all glyphs take 0.25x as long to type.
  • {NATURAL=f} makes glyphs take randomly more or less time to type, but otherwise is the same as {SPEED=f}.
  • {COLOR=s} changes the color of text; this has lots of options, so you can have e.g. "dark grey pink".
  • {STYLE=s} changes the style of text (see below); this has a LOT of options.
  • {SIZE=f} changes the size of text (coarsely, in 25% increments); this takes f as a percentage from 0 to 375.
  • {FONT=name} changes the font, if there is a FontFamily available, by looking up name.
  • {CLEARCOLOR} sets the text color to the default color, which is usually white.
  • {CLEARSIZE} sets the size to 100%.
  • {CLEARFONT} sets the font to the original font (not using the FontFamily).
  • {ENDCOLOR} sets the text color to the default color, which is usually white. This is the same as {CLEARCOLOR}.
  • {VAR=name} gets replaced by whatever String was associated with the variable name.
  • {IF=name;choice0=cat;choice1=b;=default} checks the variable name, and compares it to each choice in the token.
    • If the value assigned to name is equal to a choice, the token is replaced by the choice's value, such as cat.
    • If no choice is equivalent and there is an empty String for a choice, the value associated with the empty String is used as a default value.
  • {EVENT=name} triggers an event, sending name to the TypingListener, when the typing reaches this point.
  • {RESET} Sets all formatting and speed changes to their initial values.
    • label.setDefaultToken() can be used to change the initial values, so text defaults to some different settings.
  • {SKIP=n} skips ahead in the typing effect, instantly displaying n characters.

Effects use curly braces by default, but if curly braces aren't a good option for your text (such as in I18N files), you can use [-EFFECT] as an equivalent to {EFFECT}.

And now, it's got style!

This library extends what the original typing-label can do -- it allows styles to be applied to text, such as bold, underline, oblique, superscript, etc. Related to styles are scale changes, which can shrink or enlarge text without changing your font, and the "font family" feature. A font can be assigned a "family" of other fonts and names to use to refer to them; this acts like a normal style, but actually changes what Font is used to draw. The full list of styles is long, but isn't as detailed as the effect tokens. You can enable styles with something like libGDX color markup, in square brackets like [*], or (if the markup is used in a TypingLabel) you can use {STYLE=BOLD} to do the same thing. Tags and style names are both case-insensitive, but color names are case-sensitive. The square-bracket syntax uses primarily punctuation, and is inspired by Markdown syntax (which GitHub uses, among other places).

In the following list, each entry looks something like:

[*] toggles bold mode. Can use style names *, B, BOLD, STRONG.

That means you can always use [*] to turn bold mode on or off, and in a TypingLabel you can additionally use the case-insensitive syntax {STYLE=*}, {STYLE=B}, {STYLE=BOLD}, or {STYLE=STRONG} to do the same thing.

The full list of styles and related square-bracket tags:

  • [] undoes the last change to style/color/formatting, though it doesn't do anything to TypingLabel effects.
    • This acts much like [] does in libGDX BitmapFont markup, but works on more than colors.
  • [ ] resets all styles/colors/formatting and effects to the initial state.
    • This used different syntax before version 0.10.0; if updating from an older version, you probably want to change the old [] to the new [ ].
  • [(label)] temporarily stores the current formatting state as label, so it can be re-applied later.
    • This can be useful if you want to insert a formatted snippet into an outer piece of text, without losing the formatting the outer text had before the insertion.
    • label can be any alphanumeric String. It probably shouldn't have spaces in it, but can have underscores.
  • [ label] re-applies the formatting state stored as label, if there is one.
  • [*] toggles bold mode. Can use style names *, B, BOLD, STRONG.
  • [/] toggles oblique mode (like italics). Can use style names /, I, OBLIQUE, ITALIC.
  • [^] toggles superscript mode (and turns off subscript or midscript mode). Can use style names ^, SUPER, SUPERSCRIPT.
  • [=] toggles midscript mode (and turns off superscript or subscript mode). Can use style names =, MID, MIDSCRIPT.
  • [.] toggles subscript mode (and turns off superscript or midscript mode). Can use style names ., SUB, SUBSCRIPT.
  • [_] toggles underline mode. Can use style names _, U, UNDER, UNDERLINE.
  • [~] toggles strikethrough mode. Can use style names ~, STRIKE, STRIKETHROUGH.
  • [!] toggles all upper case mode (replacing any other case mode). Can use style names !, UP, UPPER.
  • [,] toggles all lower case mode (replacing any other case mode). Can use style names ,, LOW, LOWER.
  • [;] toggles capitalize each word mode (replacing any other case mode). Can use style names ;, EACH, TITLE.
  • [%DDD], where DDD is a percentage from 0 to 375, scales text to that multiple. Can be used with {SIZE=150%}, {SIZE=%25}, or similarly, {STYLE=200%} or {STYLE=%125}. Removes any special mode.
  • [%] on its own sets text to the default 100% scale and removes any special mode. Can be used with {STYLE=%}.
  • [%?MODE] removes the scale and sets a special mode; modes are listed below.
  • [%^MODE] removes the scale and sets a special mode at the same time as small-caps mode; modes are listed below.
  • [@Name], where Name is a key/name in this Font's family variable, switches the current typeface to the named one. Can be used with {STYLE=@Name}.
  • [@] on its own resets the typeface to this Font, ignoring its family. Can be used with {STYLE=@}.
  • [#HHHHHHHH], where HHHHHHHH is a hex RGB888 or RGBA8888 int color, changes the color. This is a normal {COLOR=#HHHHHHHH} tag.
  • [COLORNAME], where COLORNAME is a color name or description that will be looked up externally, changes the color.
    • By default, this looks up COLORNAME with ColorUtils.describe(), which tries to find any colors from Palette by name, and also allows describing mixes of colors or simple changes like "light" or "dull".
      • Palette contains all the UPPER_CASE names from libGDX's Colors class, and also about 50 additional lowercase color names (from colorful-gdx).
      • Adjectives can be "light", "dark", "rich", "dull", or stronger versions of those suffixed with "-er", "-est", or "-most". You can use any combination of adjectives, and can also combine multiple colors, such as "red orange".
        • There are some more adjectives that act like pairs of the above four adjectives, for convenience:
          • Combining "light" and "rich" is the same as "bright".
          • Combining "light" and "dull" is the same as "pale".
          • Combining "dark" and "rich" is the same as "deep".
          • Combining "dark" and "dull" is the same as "weak".
      • Some examples: [RED], [green yellow], [light blue], [duller orange], [darker rich BLUE lavender], [pale pink orange], and [deeper green navy].
      • There's a section at the bottom of this README.md that covers some tricky parts of color descriptions.
    • You can use Font's setColorLookup() method with your own ColorLookup implementation to do what you want here.
      • This isn't a commonly-used feature, but could be handy for some more elaborate color handling.
    • The name can optionally be preceded by |, which allows looking up colors with names that contain punctuation. For example, [|;_;] would look up a color called ;_;, "the color of sadness," and would not act like [;].
      • Non-alphabetical characters are ignored by default, but a custom ColorLookup might not, nor does ColorLookup.INSTANCE, which looks up String names in the libGDX Colors class verbatim.
    • This also can be used with a color tag, such as {COLOR=SKY} (which Colors can handle right away) or with a description, such as {COLOR=lighter orange-red}, even inside a tag like {GRADIENT}.
  • [+region name], where region name is the name of a TextureRegion from a registered TextureAtlas, won't change the style, but will produce that TextureRegion in-line with the text.
    • This is commonly used with KnownFonts.addEmoji() to add the 3000+ Twemoji icons to a Font.
      • If you use Twemoji, the phrases [+saxophone] and [+🎷] will each show a saxophone icon.
      • This also works with multipart emoji, such as [+call me hand, medium-dark skin tone] and [+🤙🏾].
      • The emoji can be previewed here.
    • Another option is KnownFonts.addGameIcons(), which adds icons from the game-icons.net collection. These use the same syntax: [+crystal-wand].
  • [-SOME_EFFECT] is equivalent to using curly braces around SOME_EFFECT; note the added dash.

The special modes that can be used in place of scaling are:

  • black outline or blacken, which can be used with the style names BLACK OUTLINE or BLACKEN.
  • white outline or whiten, which can be used with the style names WHITE OUTLINE or WHITEN.
  • shiny, which can be used with the style names SHINY, SHINE, or GLOSSY.
  • drop shadow or shadow, which can be used with the style names SHADOW, DROPSHADOW, or DROP SHADOW.
  • error, which can be used with the style names ERROR, REDLINE, or RED LINE.
    • This adds a zigzag red line below text; the color can be changed using Font.PACKED_ERROR_COLOR.
  • warn, which can be used with the style names WARN, YELLOWLINE, or YELLOW LINE.
    • This adds a dashed yellow line below text; the color can be changed using Font.PACKED_WARN_COLOR.
  • note, which can be used with the style names NOTE, INFO, BLUELINE, or BLUE LINE.
    • This adds a wavy blue line below text; the color can be changed using Font.PACKED_NOTE_COLOR.
  • jostle, which can be used with the style names JOSTLE, WOBBLE, or SCATTER.
    • The jostle mode can also be used with [%?].
  • small caps, which can be used with the style names SMALLCAPS or SMALL CAPS.
    • The small caps mode can also be used with [%^]. It cannot be used with the [%?small caps] syntax; it needs a caret.

The small caps mode can be used with any of the other modes except for jostle, by changing %? to %^. Other than that, no two modes can be active at the same time, and no modes can be used at the same time as scaling.

Note that modes use slightly different syntax to avoid being confused with color names. When using square brackets, each of the names given here in lower-case should be preceded by %? most of the time (small caps and jostle are special). That means to enable the red-underline mode "error", you use the square-bracket tag [%?error]. If using the curly-brace markup for TypingLabel, you would use the names given here in upper-case, and can use them like other style names:{STYLE=ERROR}, for example. Small caps mode is, as mentioned, special; it is usually enabled with [%^small caps], but can also be enabled with [%^], and can also be mixed with any other mode except jostle by changing the normal %? to %^. Whenever small caps is active, the square-bracket tag uses %^ instead of %?. Jostle mode is also special; it is usually enabled with [%?jostle], but can also be enabled with [%?] on its own. Jostle can't be mixed with small caps.

The special modes are a bit overcomplicated in terms of syntax because I ran out of punctuation I could use. The common example of a black outline around white text can be achieved with [WHITE][%?blacken]Outlined![%][GRAY]. (The example uses GRAY as the normal color, but you could also use [ ] to reset the color to whatever base color was configured on a Layout or the label that holds it. Note that [ ] also resets size, mode, and, well, everything.)

Several combinations of effects are available using the {VAR=ZOMBIE}urgh, brains...{VAR=ENDZOMBIE} syntax:

  • {VAR=FIRE} changes the following text to have fiery changing colors. You can end it with {VAR=ENDFIRE}.
  • {VAR=SPUTTERINGFIRE} changes the following text to have fiery changing colors and resize like popping flames. You can end it with {VAR=ENDSPUTTERINGFIRE}.
  • {VAR=BLIZZARD} changes the following text to waver in the wind and use icy colors, white to light blue. You can end it with {VAR=ENDBLIZZARD}.
  • {VAR=SHIVERINGBLIZZARD} changes the following text to waver in the wind and use icy colors, white to light blue, plus it will randomly make glyphs "shiver" as if cold. You can end it with {VAR=ENDSHIVERINGBLIZZARD}.
  • {VAR=ELECTRIFY} changes the following text to be a dull gray purple color and randomly makes glyphs turn light yellow and vibrate around. You can end it with {VAR=ENDELECTRIFY}.
  • {VAR=ZOMBIE} changes the following text to be "dark olive sage" (a dull gray-green color), makes glyphs rotate left and right slowly and randomly, makes glyphs drop down and get back up randomly, and when they first appear, has the glyphs emerge from the baseline (as if clawing out of a grave). You can end it with {VAR=ENDZOMBIE}.

These are defined in TypingConfig.initializeGlobalVars(), and you can define your own combinations in exactly the same way these are defined. For example, FIRE is defined with

        TypingConfig.GLOBAL_VARS.put("FIRE", "{OCEAN=0.7;1.25;0.11;1.0;0.65}");
        TypingConfig.GLOBAL_VARS.put("ENDFIRE", "{ENDOCEAN}");

The OCEAN effect doesn't care what colors it uses; it only defines an approximate pattern for how to transition between those colors. That means, counterintuitively, FIRE is best implemented with OCEAN rather than GRADIENT. Using the name FIRE is probably preferable to OCEAN, though, so the global var is here for that reason.

The ability to store formatting states using a label allows some more complex assembly of markup Strings from multiple sources. You can call something like font.storeState("spooky", "[/][darker gray][@?blacken]") to permanently store that formatting state (oblique darker gray text with a black outline) in font, and can then reset to that state just by entering [ spooky] (note the opening space). You could also create some insert-able text that stores the current formatting before it writes anything, and resets the formatting back when it is done writing. That would use something like "[(previous)][ ][BLUE][^][[citation needed][ previous]" -- if this String gets inserted in the middle of a larger block of text, it won't change the surrounding formatting, but will use blue superscript for its own text (the immortal [citation needed]) and won't use any of the surrounding block's formatting for its own superscript note. If you have multiple state-store tags with the same label, the value associated with that label will change as those tags are encountered. You might want to use unique labels to avoid accidentally changing another label's value, but this usually isn't needed.

But wait, there's fonts!

Textratypist makes heavy use of its new Font class, which is a full overhaul of libGDX's BitmapFont that shares essentially no code with its ancestor. A Font has various qualities that give it more power than BitmapFont, mostly derived from how it stores (and makes available) the glyph images as TextureRegions in a map. There's nothing strictly preventing you from adding your own images to the mapping of a Font, as long as they have the requisite information to be used as a textual glyph, and then placing those images in with your text. This is used to implement emoji, as one example, and can be used for custom icons and emoji.

Textratypist supports standard bitmap fonts and also distance field fonts, using SDF or MSDF. TypingLabel will automatically enable the ShaderProgram that the appropriate distance field type needs (if it needs one) and disable it after rendering itself. You can change this behavior by manually calling the Font.enableShader(Batch) method on your Font, and changing the Batch back to your other ShaderProgram of choice with its Batch.setShader() method (often, you just pass null here to reset the shader). Note that SDF and MSDF fonts need to be told about changes to the screen size, using Font.resizeDistanceField() or any of various other places' methods that call resizeDistanceField(). Since 1.0.0, you typically want to use the overload that takes a Viewport; if you don't have a Viewport, you don't need that overload. Every distance field font you are currently rendering needs to have its distance field resized when the window resizes, in ApplicationListener.resize().

There are several preconfigured font settings in KnownFonts; the documentation for each font getter says what files are needed to use that font. The old .fnt files have been moved here. You can see previews and descriptions of all known fonts here. Having KnownFonts isn't necessary for many fonts since version 1.0.0, because the .dat fonts are now made all by the same tool (fontwriter), and tend to be configured correctly out-of-the-box. The variety of font types isn't amazing, but it should be a good starting point. One nice thing to note is theKnownFonts.getStandardFamily() method, which requires having 16 fonts in your assets, but naturally lets you switch between any of those 16 fonts using the [@Medieval] syntax (where Medieval is one of the names it knows, in this case for "KingThings Foundation").

The fonts here use the .dat file extension (which just means it's binary data with no particular file format). They are compressed versions of larger .json fonts produced by fontwriter. The compression they use is GWT-compatible, so these .dat files can be used on any platform libGDX targets. You can still use the older .fnt files without issue, and some .fnt files are still used here (mostly for pixel fonts). You also generally need a .png with each font, though it can be in an atlas.

The license files for each font are included in the same folder, in knownFonts here. All fonts provided here were checked to ensure their licenses permit commercial use without fees, and all do. Most require attribution; check the licenses for details.

KnownFonts includes several other ways to configure existing Font instances by adding a TextureAtlas to the glyphs they know. This includes a few existing TextureAtlases of icons and... emoji!

Did somebody say emoji?

The Twemoji icons are also present in an atlas of over-3000 32x32 images; KnownFonts.addEmoji() can register them with a Font so the [+name] syntax mentioned above can draw emoji inline. Similarly, an atlas of over-4000 60x60 icons is present from Game-Icons.net, and KnownFonts.addGameIcons() can register them with a Font. Both Twemoji and Game-Icons.net atlases cannot be registered in one Font at the same time; there isn't enough free space in the portion of Unicode they can safely use. A way around this is to use the FontFamily feature, and add a font just for icons or just for emoji to the family. There's an existing method for this; KnownFonts.getGameIconsFont() lets you obtain a Font that is intended just to display Game-Icons, with some ceremony around its usage. [@Icons][+rooster][@] is a quick example of how you could switch to the Font produced by getGameIconsFont(), draw an icon, and switch back.

There are previews for Twemoji here, with the emoji char and name to look up each image. Likewise,there are previews for Game-Icons.net icons here, with just the name needed to look up each image. Remember that because the game-icons.net images are pure white with transparency, you can tint them any color you want using the standard [RED], [light dull green], or [#0022EEFF] syntax.

The license files for Twemoji and the Game-Icons.net images are included in knownFonts, next to the license files for fonts. While Twemoji has simple requirements for attribution, Game-Icons requires attribution to quite a few individual contributors; see the end of this document for the list, which you can and should copy to give credit to everyone.

There are also line-art emoji from OpenMoji, and full-color versions of the same emoji. These may be a better fit for certain projects' art styles.

Act now and get these features, free of charge!

You can rotate individual glyphs (if you draw them individually) or rotate whole blocks of text as a Layout, using an optional overload of Font.drawGlyph() or Font.drawGlyphs(). Custom effects for TypingLabel can also individually change the rotation of any glyph, as well as its position and scale on x and/or y. You can rotate a TextraLabel or TypingLabel by using their setRotation() methods, and the rotation will now act correctly for labels with backgrounds and/or with different alignment settings. The origin for rotations can be set in the label, and the whole label will rotate around that origin point.

You can also, for some fonts, have box-drawing characters and block elements be automatically generated. This needs a solid white block character (of any size, typically 1x1) present in the font at id 9608 (the Unicode full block index, '\u2588'). This also enables a better guarantee of underline and strikethrough characters connecting properly, and without smudging where two underscores or hyphens overlap each other. Font attempts to enable this in some cases, or it can be set with a parameter, but if it fails then it falls back to using underscores for underline and hyphens for strikethrough. All the fonts in KnownFonts either are configured to use a solid block or to specifically avoid it because that font renders better without it. Note that if you create a Font from a libGDX BitmapFont, this defaults to not even trying to make grid glyphs, because BitmapFonts rarely have a suitable solid block char.

Some extra configuration is possible for box drawing characters that are actually used for that purpose (not just underline or strikethrough). You can set boxDrawingBreadth on a Font to some multiplier to make box-drawing lines thicker or thinner, without changing how they connect to each other.

Various features allow extra configuration here. You can set boldStrength to some value other than the default 1 if you want more or less extra space applied from the bold style. You can also set obliqueStrength to change the angle of the skew that oblique text gets drawn with. Colors for various effects can be changed as-needed; font.PACKED_SHADOW_COLOR can be changed to use a darker, lighter, more opaque, or more transparent shadow color, for instance. font.PACKED_BLACK affects the black outline mode, and font.PACKED_WHITE affects the white outline and shiny modes. There's similar modes to change the colors of error, warning, and note underlines. All of these color configurations apply per Font instance, so you could have two Font objects using the same typeface but with different colors configured.

Hold the phone, there's widgets!

Starting in the 0.4.0 release, there are various widgets that replace their scene2d.ui counterparts and swap out Label for TextraLabel, allowing you to use markup in them. The widgets are ImageTextraButton, TextraButton, TextraCheckBox, TextraDialog, TextraLabel, TextraListBox, TextraTooltip, and TextraWindow, plus alternate versions of each that use a TypingLabel instead of a TextraLabel and have Typing in their names.

While TextArea is not yet supported a counterpart to TextArea is planned, and just hasn't worked yet. TextraLabel defaults to supporting multiple lines, and may be able to stand-in for some usage. TypingLabel permits input tracking, too, so you can use it to make selectable regions of text -- read on!

What about my input?

Input tracking has been an option for TypingLabel and code that uses it since 0.7.0 . This expanded in 0.7.4 to allow the text in a TypingLabel to be made selectable with label.setSelectable(true). You can access the currently-selected text with label.getSelectedText() or copy it directly with label.copySelectedText(). When the user completes a click and drag gesture over the TypingLabel (and it is selectable), an event is triggered as well; you can listen for "*SELECTED" in a TypingListener and copy text as soon as it is selected, or only copy when some key is pressed. Other useful features that use input tracking include the {LINK} tag, which makes a span of text a clickable link to an Internet address, {TRIGGER}, which triggers an event on-click, and a few other tags that respond to mouse hovering ({ATTENTION}, {HIGHLIGHT}, and {STYLIST}). These only work for TypingLabel, not TextraLabel, so you may want to use a TypingLabel and call skipToTheEnd() to treat it like still text that happens to respond to user input and can use animated styles like {RAINBOW}.

What's this about compatibility?

You can read in a normal scene2d.ui skin JSON file with a variant on libGDX's Skin class, FWSkin (or one of the classes that extends it), and doing that will load normal scene2d.ui styles and specialized TextraTypist styles. The specialized styles are typically only different in that they use Font instead of BitmapFont, and are all nested in the Styles class here. Having a specialized style means one Font can be reused in more places, without having to make many copies of a BitmapFont (one per widget, sometimes)... Which was the case before TextraTypist 1.0.0 . Typically, changing from Skin to FWSkin is straightforward. Code like this before:

Skin skin = new Skin(Gdx.files.internal("my-skin.json"));

Would change to this after:

FWSkin skin = new FWSkin(Gdx.files.internal("my-skin.json"));

You could also assign a FWSkin to a Skin variable, and this is the most compatible option, since your skin variable will just be a normal Skin. There are some convenience methods in FWSkin to handle distance field fonts a little more easily, though, so using FWSkin where possible is a good idea.

Why is it called FWSkin, you wonder? Well, it can load both Font and BitmapFont instances from .fnt files (needing skin configuration only for BitmapFont), and can do the same for Structured JSON fonts, which here are usually created by fontwriter, or FW. The initial purpose of FWSkin was just to load from .fnt and .json/.dat font files equally well, but its scope expanded to include the new styles.

If you're used to using Stripe, there's a drop-in replacement that does both what FWSkin does and the FreeType handling that Stripe does. This is the extra FreeTypist dependency, available in a separate repository. It allows configuring FreeType by having a "com.badlogic.gdx.graphics.g2d.freetype.FreeTypeFontGenerator" in your skin JSON, which is often produced by Skin Composer. You can take normal Skins produced by SkinComposer and compatible with Stripe and use them with FreeTypist.

You can get it via Gradle, but it's probably a better option to just copy in the two files from this folder in freetypist into your own code. Regardless of how you depend on FreeTypist, it needs a dependency on FreeType (including appropriate "platform" dependencies) and on TextraTypist (currently 1.0.0). When features are added to FWSkin and TextraTypist in general, FreeTypist should be updated also.

How do I get it?

You probably want to get TextraTypist with Gradle! The dependency for a libGDX project's core module looks like:

implementation "com.github.tommyettinger:textratypist:1.1.0"

This assumes you already depend on libGDX; TextraTypist depends on version 1.12.1 or higher. A requirement for 1.11.0 was added in TextraTypist 0.5.0 because of some breaking changes in tooltip code in libGDX. The requirement for 1.12.1 was added in 1.0.0 because some things probably changed, but 1.12.1 (or the subsequent SNAPSHOT releases) should be pretty easy to update to.

If you use GWT, this should be compatible. It needs these dependencies in the html module:

implementation "com.github.tommyettinger:textratypist:1.1.0:sources"
implementation "com.github.tommyettinger:regexodus:0.1.16:sources"

GWT also needs this in the GdxDefinition.gwt.xml file (since version 0.7.7):

<inherits name="regexodus.regexodus" />
<inherits name="com.github.tommyettinger.textratypist" />

In version 0.7.4 and earlier, you would an earlier version of both dependencies (note, this is an old version):

// OLD VERSION
implementation "com.github.tommyettinger:textratypist:0.7.4:sources"
implementation "com.github.tommyettinger:regexodus:0.1.13:sources"

and would use these GWT inherits instead:

<!-- OLD VERSION -->
<inherits name="regexodus" />
<inherits name="textratypist" />

RegExodus is the GWT-compatible regular-expression library this uses to match some complex patterns internally. Other than libGDX itself, RegExodus is the only dependency this project has. The GWT inherits changed for TextraTypist and for RegExodus because it turns out using the default package can cause real problems.

There is at least one release in the Releases section of this repo, but you're still encouraged to use Gradle to handle this library and its dependencies.

You can also use JitPack to get a current commit, which can be handy if there's a long span between releases. Current gdx-liftoff and gdx-setup projects all can use JitPack dependencies without needing any extra configuration. You would use this dependency in your core module:

implementation 'com.github.tommyettinger:textratypist:de5a52f340'

You can change de5a52f340 to any commit in the Commits tab of https://jitpack.io/#tommyettinger/textratypist , but you should not use -SNAPSHOT -- it can change without your requesting it to, which is not what you want!

You can also depend on FreeTypist using:

implementation "com.github.tommyettinger:freetypist:1.1.0"

(Now, FreeTypist 1.1.0 uses TextraTypist 1.1.0 .)

And if you target HTML and have FreeType working somehow, you would use this Gradle dependency:

implementation "com.github.tommyettinger:freetypist:1.1.0:sources"

And this inherits line:

<inherits name="com.github.tommyettinger.freetypist" />

FreeType doesn't work out-of-the-box on GWT, though there is this].

Why doesn't something work?

Some parts of TextraTypist act differently from their counterparts in scene2d.ui and Rafa Skoberg's typing-label.

A big quirk is that Font and BitmapFont have some core disagreements about how to parse a .fnt file, and the results of creating a Font with new Font("MyFont.fnt") can be different from new Font(new BitmapFont(Gdx.files.internal("MyFont.fnt"))). BitmapFont reads in padding information (and does so incorrectly according to the BMFont spec), where Font ignores padding information entirely. Some .fnt files have been made so they look right in libGDX by using padding, but they will look wrong in other frameworks/engines without that padding. Font compromises by allowing manual adjustment of x and y position for all glyphs (y often needs to be adjusted, either to a positive or negative value), as well as the width and height of glyphs (these are useful less frequently, but can be helpful to stretch or squash a font). It may take some tweaking to get a Font made from a BitmapFont to line up correctly with other widgets. You also may need to adjust the offsetX, offsetY, and maybe xAdvance parameters if you load an atlas (such as with addEmoji() or addGameIcons()), and the adjustments may be quite different for a Font made from a BitmapFont vs. a Font made directly from a .fnt file. Since 0.8.1, Font can parse an extended version of the .fnt format that permits floats for any spatial metrics, and not just ints. No files actually use this here and now, because the Structured JSON files produced by fontwriter all use floats internally for everything.

If you load text from a file and display it, you can sometimes get different results from creating that text in code, or loading it on a different machine. This should only happen if the file actually is different -- that is, the files' line endings use \r\n when checked out with Git on a Windows machine, or \n on MacOS or Linux machines. TextraTypist uses \r to mark some kinds of "soft" line breaks that can be re-wrapped, and \n for "hard" line breaks that must always create a new line. Having \r\n present generally shows up as two lines for every line break. A simple solution that works for many projects is to include a .gitattributes file in your project root, like the one here. This can be used to force all text files or all text files with a certain file extension to use LF mode, where only a single \n is used for line breaks. It's still recommended to keep .bat files using CRLF mode, with \r\n used, for compatibility. Using .gitattributes from the start is a good idea, and should keep files exactly the same on all current OSes. Older Windows programs (like Notepad from Windows 7) aren't able to read \n line endings, but the versions distributed with recent Windows can use \n easily, as can almost all code-oriented text editors.

Colors can be written out as hex strings, like #FF7700 or #9783EDFF, given by name, or described using a simple syntax. The full list of (case-sensitive!) names can be seen ordered by hue, by lightness, or by name. You can take one or more of these color names, optionally add adjectives like "light" or "dull", and get a color that mixes the named colors and applies changes from the adjectives. There are some tricky things here:

  • The only adjectives this understands are "light", "dark", "rich", "dull", "bright", "pale", "deep", and "weak", plus the stronger versions of those such as "darker", "palest", and "dullmost". Any adjectives this doesn't know, this ignores entirely. Color adjectives are case-insensitive.
    • "light" and "dark" change lightness.
    • "rich" and "dull" change saturation.
    • "bright" raises lightness and raises saturation.
    • "pale" raises lightness and lowers saturation.
    • "deep" lowers lightness and raises saturation.
    • "weak" lowers lightness and lowers saturation.
  • Color names are case-sensitive. Some names are from the libGDX Colors class, and are ALL_CAPS, sometimes with underscores. Other names are from colorful-gdx, and are lowercased single words. In a few cases, the same word refers to a different color value if you use ALL_CAPS or use lowercase (ORANGE and orange are a good example).
  • If you have multiple color names in a description, all color names will be mixed using ColorUtils.unevenMix(). You can have a number after any color name, which assigns a weight to that color for the mixing. Higher numbers will cause their preceding color to have more effect on the result; any non-negative integers are allowed.
  • If there isn't a color name present in a description, the result is the int 256 (0x00000100), or fully transparent very dark blue, which is used as a placeholder because visually it is the same as transparent black. If a color does wind up as 256 at the time it is finally rendered, it will probably be ignored.
  • You can add colors to Palette with its static addColor() method. This makes another color name usable, but won't retroactively make that color name parse correctly. You may have to call methods like Font.markup() again, so it's best if you can change colors before using them.

If you encounter issues with TypingLabel tokens, and you use ProGuard, the configuration for that tool needs a small addition:

-keep class com.github.tommyettinger.textra.** { *; }

There may be more strict versions of this ProGuard instruction possible, but at the very least, the com.github.tommyettinger.textra.effects package needs to be kept as-is, for reflection reasons. You may also need to ensure the com.github.tommyettinger.textra.Effect class is kept. Keeping all of TextraTypist should be perfectly fine for obfuscation purposes because this is an open-source library, but it does add a small amount to the size of the final JAR or APK. Right now, that appears to be 202 KB if you don't include any assets, so I wouldn't worry about it.

Distance field fonts might not be worth the hassle of resizing each font's distance field, but they do look much better at very large sizes than standard fonts. Using a standard font actually can look better for small-to-moderate size adjustments. The best approach when you don't need large text seems to be to use a large standard font texture, without SDF or MSDF, and scale it down as needed. Since 1.0.0, all fonts support emoji. Older versions did not support emoji in MSDF fonts.

If you happen to use both tommyettinger's TextraTypist library and tommyettinger's colorful-gdx library, you may encounter various issues. ColorfulBatch appeared to be incompatible because it uses an extra attribute per-vertex (compared to SpriteBatch), but an adjustment it already does seems to make it compatible without changes. Color description can be done by both colorful-gdx's SimplePalette and ColorUtils.describe() here, but descriptions would really need to use the RGBA color space to work as expected. Alternative shaders from colorful-gdx's Shaders class generally won't work correctly with the known fonts here and the defaults for neutral colors (here, white is the neutral color, but in most shaders that allow lightening, 50% gray is the neutral color). The easiest solution for all this is to use a normal, vanilla SpriteBatch for TextraTypist rendering, and whatever ShaderProgram or ColorfulBatch you want for colorful-gdx rendering.

Games that use custom Batch classes with additional attributes don't work out-of-the-box with Font, but it provides an extension point to allow subclasses to function with whatever attributes the Batch needs. Overriding Font.drawVertices() allows quite a lot of flexibility to handle unusual batches, and you can generally leave the custom Font unchanged other than the drawVertices() override. If you implement Font's copy constructor just by calling super(font);, and still allow it to take a Font argument, then you can quickly take Fonts from KnownFonts and make copies using your subclass. The JavaDocs for Font.drawVertices() detail what each of the 20 floats passed in via an array to drawVertices are expected to do; custom Batches could have 24 or more floats and so would need to put the 20 existing floats in the positions their Batch expects.

Sometimes, you may need to enable or disable integer positioning for certain fonts to avoid a strange GPU-related visual artifact that seems to only happen on some Nvidia GPUs. When this happens, glyphs may appear a half-pixel or so away from where they should be, in seemingly randomly-picked directions. It looks awful, and the integer position code at least should resolve it most of the time. Integer positions don't work well if you use world units that span multiple pixels in length, but this bug is an absolute mystery, and also doesn't happen at all on integrated GPUs, and may not happen on AMD GPUs. How it behaves on Apple Silicon graphics, I also do not know. The Issues tab is always available for anyone who wants to try to debug this! It is possible that some fixes introduced in the 0.7.x releases may have already eliminated this bug, but I'm not especially optimistic that it is always gone.

The gdx-freetype extension produces BitmapFont outputs, and you can create a Font from a BitmapFont without any issues. However, FreeType's "Auto" hinting settings both look worse than they normally should with Font, and can trigger the GPU artifact covered immediately above. Instead of "AutoSlight", "AutoMedium", or "AutoFull" hinting, you can choose "Slight", "Medium", or "Full", which makes the font look more legible and avoids the GPU half-pixel-offset issue. I don't have any idea why this happens, but because hinting can be set either in the FreeType generator parameters or (if you use Stripe or FreeTypist from this repo) set in a Skin file with "hinting": "Full", it isn't hard to fix.

There are some known issues with scaling, rotation, and integer-positioning in 0.7.5 through 0.9.0. You may see labels slide a little relatively to their backgrounds when rotated smoothly, and some (typically very small) fonts may need integer positions enabled to keep a stable baseline. Font debug lines may be quite incorrect in some of these versions, also, even if the text displays correctly to users. Scaling has improved significantly in 0.7.8, as has the handling of debug lines, but rotation still has some subtle bugs. A bug was fixed starting in 0.8.0 that made extra images in a Font (such as emoji) scale differently and drift when the Font they were mixed with scaled. That same bug also made an ordinary Font drift slightly as its scale changed; this is also fixed. Positions and sizes for background color and for images from an atlas have improved in 0.8.2, so selecting text shouldn't cover up text as badly with the background, and emoji should be fully surrounded by their selection background. Positions along the line vertically, while the text is scaled, improved in 0.8.3 so that the scaling is relative to the center of the line, rather than the bottom of the line. Some other code already expected scaling to be centered like that, so this change makes scaling look better, usually. In 0.9.0, integer positioning can still be set, but it does nothing; in practice, setting it was causing more problems than improvements. The few fonts that one would think would need integer positions (pixel fonts) actually look better without it. There are still some rotation issues in 0.9.0, though they mostly happen when the descent is configured to an extreme value, or sometimes other metrics. Lining up underline/strikethrough with rotated text is also a challenge.

Word wrap periodically seems to break and need fixing across different releases. The most recent time this happened was in 0.7.9, which also affected 0.8.0 and was fixed (I hope) in 0.8.1. A different wrapping-related bug was fixed more recently, in 0.8.3 ; this was rare, and only affected TypingLabel when some effects were present.

There's other issues with word wrap if you expect it to behave exactly like Label in libGDX. Here, we don't break words, even if a single word is longer than the width of a TextraLabel or TypingLabel. The reason for this is twofold: first, breaking words without proper hyphenation logic can change the meaning of those words, and second, fixing this could be a ton of work. I do intend to try to make this configurable and match Label by default in some near-future version. The word wrap behavior for multiple whitespace characters changed in version 0.10.0, and should be essentially correct now. Remember that word wrap only makes sense in the context of scene2d.ui for a widget (such as a TypingLabel or TextraLabel) if that widget has been sized by scene2d.ui, usually by being in a Table cell, or sometimes by being in a Container. You may need to add a label to a Table or Container, then set the width and/or height of that Cell or Container, to get wrap to act correctly.

A possibly-frequent issue (with an easy fix) that may start occurring with version 0.9.0 and later is that TextraTypist now requires Java 8 or higher. All modern desktop OSes support Java 8, and this has been true for 9 years. Android has supported Java 8 (language level, though only some APIs) for several years, and older versions can use "desugaring" to translate more-recent Java code to be compatible with (much) older Android versions. GWT has supported language level 8 for years, as well; 2.8.2, which libGDX is built with, allows using Java 8 features, and 2.11.0, which an alternate libGDX backend supports, allows using even more. RoboVM doesn't support any new APIs added in Java 8, but it has supported language level 8 from the start. TextraTypist doesn't use any APIs from Java 8, but does now use functional interfaces and method references. Having these features allows us to remove some nasty reflection-based code, and that in turn helps usage on platforms where reflection is limited, such as GWT and Graal Native Image. GWT was able to work before, but Graal Native Image would have needed a lot of configuration to be added for every game/app that used TextraTypist. The other issue is that if TextraTypist continued to target Java 7 for its library code, it wouldn't compile with Java 20 or later, and the LTS release 21 has been out for almost a year.

If you're upgrading to TextraTypist 1.0.0 or later, and you haven't changed Skin usage at all, you'll probably encounter some bugs. These are quick to fix by changing Skin to FWSkin, or if you used Stripe, FreeTypistSkin from FreeTypist. There is also a FWSkinLoader for use with AssetManager, and FreeTypist has a FreeTypistSkinLoader. FWSkin allows loading the new types of scene2d.ui styles that reuse Font instances rather than making new ones often. It also allows loading BitmapFont and Font objects from .fnt, .json, and .dat files (where .dat is the compressed JSON format this repo uses), requiring only configuration for BitmapFont in the skin .json .

If you want to make your own Fonts, you can use Hiero or AngelCode BMFont as you always have been able to, but now you can also use FontWriter (though it is Windows-only for now). FontWriter can output SDF and MSDF distance field fonts, as well as standard bitmap fonts, and it always ensures the files have been processed how TextraTypist prefers them (they need a small white square in the lower right to use for block drawing and underline/strikethrough, plus a specific transparency change makes certain overlapping renders with alpha keep their intended colors). These processing changes could be done by running BlockStamper and TransparencyProcessor in the TextraTypist tests, but that's a hassle, so using FontWriter is preferred. It outputs .json and .dat font files, as well as a .png texture. You only need the .png file AND (the .dat file OR the .json file), but the .dat file is smaller, so it is usually preferred. The .json file can be hand-edited, but it isn't very easy to do that given how it is inside.

License

This is based very closely on typing-label, by Rafa Skoberg. Typing-label is MIT-licensed according to its repo LICENSE file, but (almost certainly unintentionally) does not include any license headers in any files. Since the only requirement of the MIT license is to leave any license text as-is, this Apache-licensed project is fully compliant with MIT. The full MIT license text is in the file typing-label.LICENSE, and the Apache 2 license for this project is in the file LICENSE. Apache license headers are also present in all library source files here. The Apache license does not typically apply to non-code resources in the src/test/resources folder; individual fonts have their own licenses stored in that directory.

Twemoji isn't a font, so it might be best to mention it separately. It's licensed under CC-BY 4.0, and requires attribution to Twitter if used. Twemoji's guidelines for attribution are here. (The documentation still says Twitter, not X, and to my knowledge X doesn't employ any of the active Twemoji team, so... I would link back to the Twemoji repo, so that it is up to them).

Like Twemoji, Game-Icons.png isn't a font, and it has quite a few contributors to the project. Because all icons in the project are on one PNG file, you must credit all the contributors who licensed their art under CC-BY, and it may be ideal just to credit all the contributors, period. The list is in the license.

OpenMoji is also not a font, but it clearly has a CC-BY-SA 4.0 license, and the BY clause should be satisfied by attributing the OpenMoji Project. The SA clause should be satisfied by any users of OpenMoji continuing to provide attribution. There isn't a non-commercial clause for any assets here.

The logo was made by Raymond "raeleus" Buckley and contributed to this project. It can be used freely for any purpose, but I request that it only be used to refer to this project unless substantially modified.

Thanks

Wow, raeleus has really helped a tremendous amount. Both by testing TextraTypist in his Skin Composer app (which found quite a lot of bugs, small and large), and advising on proper scene2d.ui layout practices (which were not easy to get 100% right), the large 0.5.2 release (and those after it) would not be what it is today without his input. Thank you!

Thanks to fraudo for helping me go step-by-step to figure out how badly I had screwed up rotation with backgrounds, and for writing most of LabelRotationTest. Release 0.5.5 would still probably be in development for months without that help, so thanks are in order.

Thanks to piotr-j (evilentity), mas omenos, and DMC from the libGDX Discord, for really thoroughly testing TextraTypist. IncongruityTest was originally piotr-j's work, and it helped me figure out which fonts in KnownFonts had incorrect bounds information. TableWrapTest was based closely on mas omenos' work, and was useful to locate a wrapping bug. DMC managed to track down a very elusive ProGuard issue, which is now documented in this README.md , as well as noticing and helping debug a variety of issues with code that I had no idea people were already using. Sanda Moen, fourlastor, tecksup, and Siavash Ranbar helped track down some maddening bugs affecting word wrap; thanks to everyone who's put up with those kinds of bug! IgorApplications has helped track down various SDF-related bugs and pointed out that a feature (full-color emoji in SDF fonts) was possible, so thanks as well!

Of course, I have to thank Rafa Skoberg for writing quite a lot of the code here! About 2/3 of the effects are almost purely by Rafa, much of the TypingLabel-related code is nearly unchanged from his work, and in general he showed what libGDX UIs could be just by making the initial code.

Thanks to all the font designers who made fonts we use here; by making your fonts freely available, you perform a great service to the people who depend on them.

Thanks to Twitter for generously contributing Twemoji to the world of open source; having broadly available emoji makes them much more usable. Note that because this was a generous action by Twitter, it happened before its acquisition/change to "X".

Thanks to the many contributors to game-icons.net for producing high-quality free icons to game developers everywhere. The icons in Game-Icons.png were made by:

(Projects that use TextraTypist can copy the above list of Game-Icons.png contributors to comply with its license.)

Thanks again to the OpenMoji project! That was clearly a lot of work. OpenMoji is licensed as CC BY-SA 4.0.

Thanks also to the developers of the Noto Fonts and Emoji! They are OFL 1.1 licensed. The Noto Color Emoji here also used data from the MIT-licensed EmojiBase project to create the atlas.