Automatically uploads activities from a connected Garmin GPS device to strava. Allowing the Pi to be used as a plug and forget charging / uploading station.
Currently the udev and properties file support the Edge 500 and Forerunner 15 devices, but adding new devices should be simple.
Paths should be fine if the project is extracted to /home/pi/pi-garmin-upload, but scripts files can be modified to point anywhere.
Create an Application at https://www.strava.com/settings/api, then generate an oauth token code by using the following:
https://www.strava.com/oauth/authorize?client_id={app_id}&response_type=code&redirect_uri={callback url}&approval_prompt=force&scope=write
The OAUTH code is returned in the callback url after allowing access on this screen. e.g. code=60509bc59d76dac4897df0a78f2b9983948fabc
This code, the application id, and the client secret key (both available on the Strava api settings page) should be added to the api.properties.template file. To work with the default setup, copy the file to /home/pi/api.properties.
api.clientid=1234
api.secret=632c7a0023024997ebe515583c72391700badabc
api.code=60509bc59d76dac4897df0a78f2b9983948fabc
You'll notice there are some device properties in this file as well. These lines represent the folder structure on the device (as annoyingly they don't appear to be consistent across devices, this could be a Forerunner/Edge difference though).
The last part of the property should match the last part of the device path.
Find the device(s) using ls -l /dev/disk/by-label and create a new entry in /etc/fstab using your editor of choice.
LABEL=GARMINFR15 /media/fr15 vfat defaults,nofail 0 0
LABEL=GARMINE500 /media/e500 vfat defaults,nofail 0 0
sudo apt-get update && sudo apt-get install oracle-java8-jdk
Clone the repository into /home/pi (or another location and change paths in filepaths in files).
Copy appropriate device udev rules files from pi-garmin-upload/udev-rules (or create your own with a new product ID found using lsusb) into:
/etc/udev/rules.d/
And then reload the udev rules with:
$ sudo udevadm control --reload-rules
When a device is plugged in, the udev rules should pick up that is has been connected and run the scripts. These ensure that the device folders are mounted correctly, before calling the java application. This is an extremely simple app that loads the activity files from the device and then submits them to the strava api.
Duplicate api.properties file, renaming it to another name (e.g. sarah.properties) and changing the properties as appropriate. Then modify the file copied earlier /etc/udev/rules.d/8-garmin-device.rules, and modify the final argument to match the file name.
ACTION=="add", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="091e", ATTRS{idProduct}=="276f", RUN+="/home/pi/pi-garmin-upload/scripts/run.sh /media/fr15 api"
ACTION=="add", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="091e", ATTRS{idProduct}=="240c", RUN+="/home/pi/pi-garmin-upload/scripts/run.sh /media/e500 sarah"
And then reload the udev rules with:
$ sudo udevadm control --reload-rules