Skip to content

nekoewen/ewen-qmk

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

79 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

This is a place for me to put my various QMK firmware profiles and compiled .hex files, plus a few .uf2 files for using RP2040-based boards. (It's weird that people hardly ever make the compiled firmware files available for download, right?) Also check out this repo for pre-compiled VIA firmware for tons of keyboards and this page for pre-compiled VIAL firmware! Thanks to XDeckerX for creating compiled KLOR firmware!

The easiest way to flash firmware (that has already been compiled) is with the QMK Toolbox.

Install the Toolbox application, then open the .hex file. Check the "Auto-Flash" option, plug your controller in, and then when you bridge the GND and RST pins it should put the controller in bootloader mode and flash automatically. If your keyboard has a reset switch you can press that instead, while for an Elite-C you should press its built-in reset switch.

A screenshot of QMK Toolbox with the Open and Auto-Flash controls circled in red

For those RP2040-based boards, you just put the board into bootloader mode and drop the file into the drive that appear.

About

My QMK keyboard firmware profiles

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published