Skip to content
This repository has been archived by the owner on Feb 4, 2023. It is now read-only.

Fully Asynchronous DNS Server Library for ESP32 boards using LwIP W6100 Ethernet. This library is one of the current or future and more advanced Async libraries, such as AsyncWebServer_ESP32_W6100, AsyncHTTPRequest_ESP32_W6100, AsyncHTTPSRequest_ESP32_W6100

License

Notifications You must be signed in to change notification settings

khoih-prog/AsyncDNSServer_ESP32_W6100

Repository files navigation

AsyncDNSServer_ESP32_W6100 Library

arduino-library-badge GitHub release contributions welcome GitHub issues

Donate to my libraries using BuyMeACoffee



Table of Contents



Features

This AsyncDNSServer_ESP32_W6100 library is a fully asynchronous DNSServer library, designed for a trouble-free, multi-connection network environment, for ESP32 boards using LwIP W6100 Ethernet.

This library is based on, modified from:

  1. Develo's ESPAsyncDNSServer

to apply the better and faster asynchronous feature of the powerful AsyncDNSServer_ESP32_W6100 Library into ESP32 boards using LwIP W6100 Ethernet.

Why Async is better

  • Using asynchronous network means that you can handle more than one connection at the same time
  • You are called once the packet is ready
  • After a DNS Client connected to this Async DNS server, you are immediately ready to handle other connections while the Server is taking care of receiving and responding to the UDP packets in the background.
  • You are not required to check in a tight loop() the arrival of the DNS requesting packets to process them.
  • Speed is OMG

Currently supported Boards

  1. ESP32_W6100 boards using ESP32 boards with LwIP W6100 Ethernet

W6100

FULL_DUPLEX, 100Mbps



Prerequisites

  1. Arduino IDE 1.8.19+ for Arduino
  2. ESP32 Core 2.0.6+ for ESP32-based boards. Latest release
  3. WebServer_ESP32_W6100 library 1.5.2+. To install, check arduino-library-badge
  4. AsyncUdp_ESP32_W6100 library 2.0.0+. To install, check arduino-library-badge


Installation

The suggested way to install is to:

Use Arduino Library Manager

The best way is to use Arduino Library Manager. Search for AsyncDNSServer_ESP32_W6100, then select / install the latest version. You can also use this link arduino-library-badge for more detailed instructions.

Manual Install

  1. Navigate to AsyncDNSServer_ESP32_W6100 page.
  2. Download the latest release AsyncDNSServer_ESP32_W6100-main.zip.
  3. Extract the zip file to AsyncDNSServer_ESP32_W6100-main directory
  4. Copy the whole AsyncDNSServer_ESP32_W6100-main folder to Arduino libraries' directory such as ~/Arduino/libraries/.

VS Code & PlatformIO:

  1. Install VS Code
  2. Install PlatformIO
  3. Install AsyncDNSServer_ESP32_W6100 library by using Library Manager. Search for AsyncDNSServer_ESP32_W6100 in Platform.io Author's Libraries
  4. Use included platformio.ini file from examples to ensure that all dependent libraries will installed automatically. Please visit documentation for the other options and examples at Project Configuration File


Libraries' Patches

1. For fixing ESP32 compile error

To fix ESP32 compile error, just copy the following file into the ESP32 cores/esp32 directory (e.g. ./arduino-1.8.19/hardware/espressif/cores/esp32) to overwrite the old file:



HOWTO Fix Multiple Definitions Linker Error

The current library implementation, using xyz-Impl.h instead of standard xyz.cpp, possibly creates certain Multiple Definitions Linker error in certain use cases.

You can include this .hpp file

// Can be included as many times as necessary, without `Multiple Definitions` Linker Error
#include "AsyncDNSServer_ESP32_W6100.hpp"     //https://github.com/khoih-prog/AsyncDNSServer_ESP32_W6100

in many files. But be sure to use the following .h file in just 1 .h, .cpp or .ino file, which must not be included in any other file, to avoid Multiple Definitions Linker Error

// To be included only in main(), .ino with setup() to avoid `Multiple Definitions` Linker Error
#include "AsyncDNSServer_ESP32_W6100.h"       //https://github.com/khoih-prog/AsyncDNSServer_ESP32_W6100

Check the new multiFileProject example for a HOWTO demo.



HOWTO Use analogRead() with ESP32 running WiFi and/or BlueTooth (BT/BLE)

Please have a look at ESP_WiFiManager Issue 39: Not able to read analog port when using the autoconnect example to have more detailed description and solution of the issue.

1. ESP32 has 2 ADCs, named ADC1 and ADC2

2. ESP32 ADCs functions

  • ADC1 controls ADC function for pins GPIO32-GPIO39
  • ADC2 controls ADC function for pins GPIO0, 2, 4, 12-15, 25-27

3.. ESP32 WiFi uses ADC2 for WiFi functions

Look in file adc_common.c

In ADC2, there're two locks used for different cases:

  1. lock shared with app and Wi-Fi: ESP32: When Wi-Fi using the ADC2, we assume it will never stop, so app checks the lock and returns immediately if failed. ESP32S2: The controller's control over the ADC is determined by the arbiter. There is no need to control by lock.

  2. lock shared between tasks: when several tasks sharing the ADC2, we want to guarantee all the requests will be handled. Since conversions are short (about 31us), app returns the lock very soon, we use a spinlock to stand there waiting to do conversions one by one.

adc2_spinlock should be acquired first, then adc2_wifi_lock or rtc_spinlock.

  • In order to use ADC2 for other functions, we have to acquire complicated firmware locks and very difficult to do
  • So, it's not advisable to use ADC2 with WiFi/BlueTooth (BT/BLE).
  • Use ADC1, and pins GPIO32-GPIO39
  • If somehow it's a must to use those pins serviced by ADC2 (GPIO0, 2, 4, 12, 13, 14, 15, 25, 26 and 27), use the fix mentioned at the end of ESP_WiFiManager Issue 39: Not able to read analog port when using the autoconnect example to work with ESP32 WiFi/BlueTooth (BT/BLE)


HOWTO Setting up the Async DNS Server

#include <AsyncDNSServer_ESP32_W6100.h>
#include <ESPAsyncWebServer.h>

const byte DNS_PORT = 53;

IPAddress apIP;

AsyncDNSServer dnsServer;

AsyncWebServer server(80);

void setup()
{
  ...
  
  ///////////////////////////////////

  // To be called before ETH.begin()
  ESP32_W6100_onEvent();

  // start the ethernet connection and the server:
  // Use DHCP dynamic IP and random mac
  //bool begin(int MISO_GPIO, int MOSI_GPIO, int SCLK_GPIO, int CS_GPIO, int INT_GPIO, int SPI_CLOCK_MHZ,
  //           int SPI_HOST, uint8_t *W6100_Mac = W6100_Default_Mac);
  ETH.begin( MISO_GPIO, MOSI_GPIO, SCK_GPIO, CS_GPIO, INT_GPIO, SPI_CLOCK_MHZ, ETH_SPI_HOST );
  //ETH.begin( MISO_GPIO, MOSI_GPIO, SCK_GPIO, CS_GPIO, INT_GPIO, SPI_CLOCK_MHZ, ETH_SPI_HOST, mac[millis() % NUMBER_OF_MAC] );

  // Static IP, leave without this line to get IP via DHCP
  //bool config(IPAddress local_ip, IPAddress gateway, IPAddress subnet, IPAddress dns1 = 0, IPAddress dns2 = 0);
  //ETH.config(myIP, myGW, mySN, myDNS);

  ESP32_W6100_waitForConnect();

  ///////////////////////////////////

  apIP = ETH.localIP();

  ///////////////////////////////////

	// modify TTL associated  with the domain name (in seconds)
	// default is 60 seconds
	dnsServer.setTTL(300);
	// set which return code will be used for all other domains (e.g. sending
	// ServerFailure instead of NonExistentDomain will reduce number of queries
	// sent by clients)
	// default is AsyncDNSReplyCode::NonExistentDomain
	dnsServer.setErrorReplyCode(AsyncDNSReplyCode::ServerFailure);

	// start DNS server for a specific domain name
	dnsServer.start(DNS_PORT, "*", apIP);

  ...
}

void loop() 
{
}


How to connect W6100 to ESP32

You can change the INT pin to another one. Default is GPIO4

// Must connect INT to GPIOxx or not working
#define INT_GPIO            4

W6100

FULL_DUPLEX, 100Mbps


W6100 <---> ESP32
MOSI <---> GPIO23
MISO <---> GPIO19
SCK <---> GPIO18
CS/SS <---> GPIO5
INT <---> GPIO4
RST <---> RST
GND <---> GND
3.3V <---> 3.3V


Examples

  1. AsyncCaptivePortalAdvanced_ESP32_W6100
  2. AsyncCaptivePortal_ESP32_W6100
  3. AsyncDNServerFull_ESP32_W6100
  4. AsyncDNSServer_ESP32_W6100


#if !( defined(ESP32) )
#error This code is designed for (ESP32 + W6100) to run on ESP32 platform! Please check your Tools->Board setting.
#endif
#define ASYNC_DNS_ESP32_W6100_DEBUG_PORT Serial
// Use from 0 to 4. Higher number, more debugging messages and memory usage.
#define _ASYNC_DNS_ESP32_W6100_LOGLEVEL_ 1
/////////////////////////////////////////////
// Enter a MAC address and IP address for your controller below.
#define NUMBER_OF_MAC 20
byte mac[][NUMBER_OF_MAC] =
{
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x01 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x02 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x03 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x04 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x05 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x06 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x07 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x08 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x09 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0A },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0B },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0C },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0D },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0E },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0F },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x10 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x11 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x12 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x13 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x14 },
};
// Select the IP address according to your local network
IPAddress myIP(192, 168, 2, 232);
IPAddress myGW(192, 168, 2, 1);
IPAddress mySN(255, 255, 255, 0);
// Google DNS Server IP
IPAddress myDNS(8, 8, 8, 8);
//////////////////////////////////////////////////////////
// Optional values to override default settings
// Don't change unless you know what you're doing
//#define ETH_SPI_HOST SPI3_HOST
//#define SPI_CLOCK_MHZ 25
// Must connect INT to GPIOxx or not working
//#define INT_GPIO 4
//#define MISO_GPIO 19
//#define MOSI_GPIO 23
//#define SCK_GPIO 18
//#define CS_GPIO 5
//////////////////////////////////////////////////////////
#include <AsyncDNSServer_ESP32_W6100.h>
#include <ESPAsyncWebServer.h>
const byte DNS_PORT = 53;
IPAddress apIP;
AsyncDNSServer dnsServer;
AsyncWebServer server(80);
void handleNotFound(AsyncWebServerRequest *request)
{
String message = "Hello World from " + String(ARDUINO_BOARD);
message += "\nURI: ";
message += request->url();
request->send(200, "text/plain", message);
}
void setup()
{
Serial.begin(115200);
while (!Serial && (millis() < 5000));
Serial.print(F("\nStart AsyncDNSServer_ESP32_W6100 on "));
Serial.print(ARDUINO_BOARD);
Serial.print(F(" with "));
Serial.println(SHIELD_TYPE);
Serial.println(WEBSERVER_ESP32_W6100_VERSION);
Serial.println(ASYNC_UDP_ESP32_W6100_VERSION);
Serial.println(ASYNC_DNS_SERVER_ESP32_W6100_VERSION);
Serial.setDebugOutput(true);
UDP_LOGWARN(F("Default SPI pinout:"));
UDP_LOGWARN1(F("SPI_HOST:"), ETH_SPI_HOST);
UDP_LOGWARN1(F("MOSI:"), MOSI_GPIO);
UDP_LOGWARN1(F("MISO:"), MISO_GPIO);
UDP_LOGWARN1(F("SCK:"), SCK_GPIO);
UDP_LOGWARN1(F("CS:"), CS_GPIO);
UDP_LOGWARN1(F("INT:"), INT_GPIO);
UDP_LOGWARN1(F("SPI Clock (MHz):"), SPI_CLOCK_MHZ);
UDP_LOGWARN(F("========================="));
///////////////////////////////////
// To be called before ETH.begin()
ESP32_W6100_onEvent();
// start the ethernet connection and the server:
// Use DHCP dynamic IP and random mac
//bool begin(int MISO_GPIO, int MOSI_GPIO, int SCLK_GPIO, int CS_GPIO, int INT_GPIO, int SPI_CLOCK_MHZ,
// int SPI_HOST, uint8_t *W6100_Mac = W6100_Default_Mac);
ETH.begin( MISO_GPIO, MOSI_GPIO, SCK_GPIO, CS_GPIO, INT_GPIO, SPI_CLOCK_MHZ, ETH_SPI_HOST );
//ETH.begin( MISO_GPIO, MOSI_GPIO, SCK_GPIO, CS_GPIO, INT_GPIO, SPI_CLOCK_MHZ, ETH_SPI_HOST, mac[millis() % NUMBER_OF_MAC] );
// Static IP, leave without this line to get IP via DHCP
//bool config(IPAddress local_ip, IPAddress gateway, IPAddress subnet, IPAddress dns1 = 0, IPAddress dns2 = 0);
//ETH.config(myIP, myGW, mySN, myDNS);
ESP32_W6100_waitForConnect();
///////////////////////////////////
apIP = ETH.localIP();
///////////////////////////////////
// modify TTL associated with the domain name (in seconds)
// default is 60 seconds
dnsServer.setTTL(300);
// set which return code will be used for all other domains
// (e.g. sending ServerFailure instead of NonExistentDomain will reduce number of queries
// sent by clients). Default is AsyncDNSReplyCode::NonExistentDomain
dnsServer.setErrorReplyCode(AsyncDNSReplyCode::ServerFailure);
// start DNS server for a specific domain name
dnsServer.start(DNS_PORT, "*", apIP);
server.onNotFound(handleNotFound);
server.begin();
Serial.print(F("AsyncDNSServer is @ IP : "));
Serial.println(apIP);
}
void loop()
{
}



Debug

Debug is enabled by default on Serial. To disable, use level 0

#define ASYNC_DNS_ESP32_W6100_DEBUG_PORT      Serial

// Use from 0 to 4. Higher number, more debugging messages and memory usage.
#define _ASYNC_DNS_ESP32_W6100_LOGLEVEL_      0

You can also change the debugging level from 0 to 4

#define ASYNC_DNS_ESP32_W6100_DEBUG_PORT      Serial


// Use from 0 to 4. Higher number, more debugging messages and memory usage.
#define _ASYNC_DNS_ESP32_W6100_LOGLEVEL_    4

Troubleshooting

If you get compilation errors, more often than not, you may need to install a newer version of Arduino IDE, the Arduino ESP32 core or depending libraries.

Sometimes, the library will only work if you update the ESP32 core to the latest and stable version because I am always using the latest stable cores/libraries.



Issues

Submit issues to: AsyncDNSServer_ESP32_W6100 issues


TO DO

  1. Fix bug. Add enhancement

DONE

  1. Add support to ESP32-based boards using LwIP W6100 Ethernet
  2. Add more examples.
  3. Add debugging features
  4. Add astyle using allman style


Contributions and Thanks

  1. Based on and modified from Develo's ESPAsyncDNSServer Library.
devyte
⭐️ Develo


Contributing

If you want to contribute to this project:

  • Report bugs and errors
  • Ask for enhancements
  • Create issues and pull requests
  • Tell other people about this library


License

  • The library is licensed under GPLv3

Copyright

  • Copyright (c) 2016- Develo
  • Copyright (c) 2023- Khoi Hoang

About

Fully Asynchronous DNS Server Library for ESP32 boards using LwIP W6100 Ethernet. This library is one of the current or future and more advanced Async libraries, such as AsyncWebServer_ESP32_W6100, AsyncHTTPRequest_ESP32_W6100, AsyncHTTPSRequest_ESP32_W6100

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published