mpc85xx-p1020: add support for Hewlett-Packard MSM460

[blocktrron]

• Must be flashable from vendor firmware
  • Web interface
  • TFTP
  • Other:
• Must support upgrade mechanism
  • Must have working sysupgrade
    • Must keep/forget configuration (sysupgrade [-n], firstboot)
  • Gluon profile name matches autoupdater image name
    (lua -e 'print(require("platform_info").get_image_name())')
• Reset/WPS/... button must return device into config mode
• Primary MAC address should match address on device label (or packaging)
  (https://gluon.readthedocs.io/en/latest/dev/hardware.html#hardware-support-in-packages)
  • When re-adding a device that was supported by an earlier version of Gluon, a
    factory reset must be performed before checking the primary MAC address, as
    the setting from the old version is not reset otherwise.
• Wired network
  • should support all network ports on the device
  • must have correct port assignment (WAN/LAN)
    • if there are multiple ports but no WAN port:
      • the PoE input should be WAN, all other ports LAN
      • otherwise the first port should be declared as WAN, all other ports LAN
• Wireless network (if applicable)
  • Association with AP must be possible on all radios
  • Association with 802.11s mesh must work on all radios
  • AP+mesh mode must work in parallel on all radios
• LED mapping
  • Power/system LED
    • Lit while the device is on
    • Should display config mode blink sequence
      (https://gluon.readthedocs.io/en/latest/features/configmode.html)
  • Radio LEDs
    • Should map to their respective radio
    • Should show activity
  • Switch port LEDs
    • Should map to their respective port (or switch, if only one led present)
    • Should show link state and activity
• Outdoor devices only:
  • Added board name to is_outdoor_device function in package/gluon-core/luasrc/usr/lib/lua/gluon/platform.lua
• Cellular devices only:
  • Added board name to is_cellular_device function in package/gluon-core/luasrc/usr/lib/lua/gluon/platform.lua
  • Added board name with modem setup function setup_ncm_qmi to package/gluon-core/luasrc/lib/gluon/upgrade/250-cellular
• Docs:
  • Added Device to docs/user/supported_devices.rst

[tbuss]

I figured out a issue with 4 MSM460 devices.
None of them creates a vpn tunnel although configured. I use the firmware from ff3l, wireless meshing with another node works but not wired meshing nor creating a vpn tunnel.

@blocktrron: Could you please advise me, what I could try or where to start? Sorry, I'm quite new to freifunk/gluon...

[blocktrron]

@tbuss Please check with your community how the VPN setup is designed there. If the device can acquire an IP-Address from the upstream, it is not a hardware nor Gluon issue.

[tbuss]

@blocktrron Thanks for the fast response! The problem is fixed, there was another issue during key update on the server, so not related to the firmware.

The devices are now running, sorry for the circumnavigate.