Releases: MillenniumMachines/RRF-Configs
RRF Configuration v19.07.24-stable
Release v19.07.24-stable
Notes
- This is the same as release
v0.3.2
, but with an updated tag - given the similarities between theRRF-Configs
andMillenniumOS
versions we have decided to move to a date-based versioning system forRRF-Configs
to reduce confusion. - If you're currently using the
v0.3.2
release ofRRF-Configs
there is no need to upgrade!
Upgrading
- You can upload any of these release zip files from Duet Web Control (DWC), via the "Files -> System" link in the menu.
- NOTE: If you upload the file via DWC and click 'Yes' to upgrade, the WiFi module will be flashed twice. There is currently no way around this, we need to do this to support extracting the file directly to the SD card for initial installations.
- The first time your machine reboots after installing the new release, it will switch back into Access Point mode and will not connect to your WiFi network if it was configured to do so - this is because WiFi network details might be wiped when the WiFi module is updated, and bringing the board back up in AP mode allows recovery without having to connect over USB.
- You can connect to the access point using the password in the documentation, and check if your WiFi network details need to be re-added using M587.
- You may then reboot, and the machine will revert to the existing configuration in
network-default.g
ornetwork.g
(if you have one). - Please see below for details of what is included in each release.
Milo V1.5
LDO-KIT-FLY-CDYV3
Notes
For machines built from the LDO kit using the Fly CDYv3, TMC2209 drivers and the LDO supplied motors capable of 3A/phase.
Contains
Component | Source File(s) | Version |
---|---|---|
RepRapFirmware | firmware_cdy3_f4.bin |
3.5.2 |
DuetWiFiServer | WiFiModule_esp32.bin |
3.5.2 |
DuetWebControl | DuetWebControl-SD.zip |
3.5.2 |
Configuration | milo-v1.5/common and milo-v1.5/ldo-kit-fly-cdyv3 |
v19.07.24-stable |
Optionally, MillenniumOS | mos-release-v0.3.1.zip |
0.3.1 |
REFERENCE-FLY-CDYV3
Notes
For machines built from the Millennium Machines BOM using the Fly CDYv3, TMC2209 drivers and smallest NEMA23 motors.
Contains
Component | Source File(s) | Version |
---|---|---|
RepRapFirmware | firmware_cdy3_f4.bin |
3.5.2 |
DuetWiFiServer | WiFiModule_esp32.bin |
3.5.2 |
DuetWebControl | DuetWebControl-SD.zip |
3.5.2 |
Configuration | milo-v1.5/common and milo-v1.5/reference-fly-cdyv3 |
v19.07.24-stable |
Optionally, MillenniumOS | mos-release-v0.3.1.zip |
0.3.1 |
REFERENCE-SKR3-EZ-5160
Notes
For machines using the SKR3-EZ (h723) with esp32 WiFi, external BTT 5160 drivers and 3A/phase or higher NEMA23 motors. WARNING: Do not use with other 5160 drivers unless they have the same sense resistor value of 0.022Ω!
Contains
Component | Source File(s) | Version |
---|---|---|
RepRapFirmware | firmware_skr3ez_h723.bin |
3.5.2 |
DuetWiFiServer | WiFiModule_esp32.bin |
3.5.2 |
DuetWebControl | DuetWebControl-SD.zip |
3.5.2 |
Configuration | milo-v1.5/common and milo-v1.5/reference-skr3-ez-5160 |
v19.07.24-stable |
Optionally, MillenniumOS | mos-release-v0.3.1.zip |
0.3.1 |
What's Changed
- Update MillenniumOS to
v0.3.1
by @benagricola in #43
Full Changelog: v0.3.1...v19.07.24-stable
RRF Configuration v0.3.2
Release v0.3.2
Upgrading
- You can upload any of these release zip files from Duet Web Control (DWC), via the "Files -> System" link in the menu.
- NOTE: If you upload the file via DWC and click 'Yes' to upgrade, the WiFi module will be flashed twice. There is currently no way around this, we need to do this to support extracting the file directly to the SD card for initial installations.
- Please see below for details of what is included in each release.
Milo V1.5
LDO-KIT-FLY-CDYV3
Notes
For machines built from the LDO kit using the Fly CDYv3, TMC2209 drivers and the LDO supplied motors capable of 3A/phase.
Contains
Component | Source File(s) | Version |
---|---|---|
RepRapFirmware | firmware_cdy3_f4.bin |
3.5.2 |
DuetWiFiServer | WiFiModule_esp32.bin |
3.5.2 |
DuetWebControl | DuetWebControl-SD.zip |
3.5.2 |
Configuration | milo-v1.5/common and milo-v1.5/ldo-kit-fly-cdyv3 |
v0.3.2 |
Optionally, MillenniumOS | mos-release-v0.3.1.zip |
0.3.1 |
REFERENCE-FLY-CDYV3
Notes
For machines built from the Millennium Machines BOM using the Fly CDYv3, TMC2209 drivers and smallest NEMA23 motors.
Contains
Component | Source File(s) | Version |
---|---|---|
RepRapFirmware | firmware_cdy3_f4.bin |
3.5.2 |
DuetWiFiServer | WiFiModule_esp32.bin |
3.5.2 |
DuetWebControl | DuetWebControl-SD.zip |
3.5.2 |
Configuration | milo-v1.5/common and milo-v1.5/reference-fly-cdyv3 |
v0.3.2 |
Optionally, MillenniumOS | mos-release-v0.3.1.zip |
0.3.1 |
REFERENCE-SKR3-EZ-5160
Notes
For machines using the SKR3-EZ (h723) with esp32 WiFi, external BTT 5160 drivers and 3A/phase or higher NEMA23 motors. WARNING: Do not use with other 5160 drivers unless they have the same sense resistor value of 0.022Ω!
Contains
Component | Source File(s) | Version |
---|---|---|
RepRapFirmware | firmware_skr3ez_h723.bin |
3.5.2 |
DuetWiFiServer | WiFiModule_esp32.bin |
3.5.2 |
DuetWebControl | DuetWebControl-SD.zip |
3.5.2 |
Configuration | milo-v1.5/common and milo-v1.5/reference-skr3-ez-5160 |
v0.3.2 |
Optionally, MillenniumOS | mos-release-v0.3.1.zip |
0.3.1 |
What's Changed
- Update MillenniumOS to
v0.3.1
by @benagricola in #43
Full Changelog: v0.3.1...v0.3.2
RRF Configuration v0.3.1
Release v0.3.1
Upgrading
- You can upload any of these release zip files from Duet Web Control (DWC), via the "Files -> System" link in the menu.
- NOTE: If you upload the file via DWC and click 'Yes' to upgrade, the WiFi module will be flashed twice. There is currently no way around this, we need to do this to support extracting the file directly to the SD card for initial installations.
- Please see below for details of what is included in each release.
Milo V1.5
LDO-KIT-FLY-CDYV3
Notes
For machines built from the LDO kit using the Fly CDYv3, TMC2209 drivers and the LDO supplied motors capable of 3A/phase.
Contains
Component | Source File(s) | Version |
---|---|---|
RepRapFirmware | firmware_cdy3_f4.bin |
3.5.2 |
DuetWiFiServer | WiFiModule_esp32.bin |
3.5.2 |
DuetWebControl | DuetWebControl-SD.zip |
3.5.2 |
Configuration | milo-v1.5/common and milo-v1.5/ldo-kit-fly-cdyv3 |
v0.3.1 |
Optionally, MillenniumOS | mos-release-v0.3.0.zip |
0.3.0 |
REFERENCE-FLY-CDYV3
Notes
For machines built from the Millennium Machines BOM using the Fly CDYv3, TMC2209 drivers and smallest NEMA23 motors.
Contains
Component | Source File(s) | Version |
---|---|---|
RepRapFirmware | firmware_cdy3_f4.bin |
3.5.2 |
DuetWiFiServer | WiFiModule_esp32.bin |
3.5.2 |
DuetWebControl | DuetWebControl-SD.zip |
3.5.2 |
Configuration | milo-v1.5/common and milo-v1.5/reference-fly-cdyv3 |
v0.3.1 |
Optionally, MillenniumOS | mos-release-v0.3.0.zip |
0.3.0 |
REFERENCE-SKR3-EZ-5160
Notes
For machines using the SKR3-EZ (h723) with esp32 WiFi, external BTT 5160 drivers and 3A/phase or higher NEMA23 motors. WARNING: Do not use with other 5160 drivers unless they have the same sense resistor value of 0.022Ω!
Contains
Component | Source File(s) | Version |
---|---|---|
RepRapFirmware | firmware_skr3ez_h723.bin |
3.5.2 |
DuetWiFiServer | WiFiModule_esp32.bin |
3.5.2 |
DuetWebControl | DuetWebControl-SD.zip |
3.5.2 |
Configuration | milo-v1.5/common and milo-v1.5/reference-skr3-ez-5160 |
v0.3.1 |
Optionally, MillenniumOS | mos-release-v0.3.0.zip |
0.3.0 |
What's Changed
- Store wifi module type to fix update procedure by @benagricola in #41
- Update drives.g by @prasadp4009 in #40
- Update bundled MillenniumOS to v0.3.0 by @benagricola in #42
New Contributors
- @prasadp4009 made their first contribution in #40
Full Changelog: v0.3.0...v0.3.1
RRF Configuration v0.3.0
Release v0.3.0
Upgrading
- You can upload any of these release zip files from Duet Web Control (DWC), via the "Files -> System" link in the menu.
- NOTE: If you upload the file via DWC and click 'Yes' to upgrade, the WiFi module will be flashed twice. There is currently no way around this, we need to do this to support extracting the file directly to the SD card for initial installations.
- WARNING: If you have upgraded to a pre-release version of MillenniumOS (you can check the version using
M7600
), please do not download a configuration release from below that contains MillenniumOS - it is likely a downgrade from your currently installed version - and downgrades are not supported. - The first time your machine reboots after installing the new release, it will switch back into Access Point mode and will not connect to your WiFi network if it was configured to do so - this is because WiFi network details might be wiped when the WiFi module is updated, and bringing the board back up in AP mode allows recovery without having to connect over USB.
- You can connect to the access point using the password in the documentation, and check if your WiFi network details need to be re-added using M587.
- You may then reboot, and the machine will revert to the existing configuration in
network-default.g
ornetwork.g
(if you have one). - Please see below for details of what is included in each release.
Milo V1.5
LDO-KIT-FLY-CDYV3
Notes
For machines built from the LDO kit using the Fly CDYv3, TMC2209 drivers and the LDO supplied motors capable of 3A/phase.
Contains
Component | Source File(s) | Version |
---|---|---|
RepRapFirmware | firmware_cdy3_f4.bin |
3.5.2 |
DuetWiFiServer | WiFiModule_esp32.bin |
3.5.2 |
DuetWebControl | DuetWebControl-SD.zip |
3.5.2 |
Configuration | milo-v1.5/common and milo-v1.5/ldo-kit-fly-cdyv3 |
v0.3.0 |
Optionally, MillenniumOS | mos-release-v0.2.3.zip |
0.2.3 |
REFERENCE-FLY-CDYV3
Notes
For machines built from the Millennium Machines BOM using the Fly CDYv3, TMC2209 drivers and smallest NEMA23 motors.
Contains
Component | Source File(s) | Version |
---|---|---|
RepRapFirmware | firmware_cdy3_f4.bin |
3.5.2 |
DuetWiFiServer | WiFiModule_esp32.bin |
3.5.2 |
DuetWebControl | DuetWebControl-SD.zip |
3.5.2 |
Configuration | milo-v1.5/common and milo-v1.5/reference-fly-cdyv3 |
v0.3.0 |
Optionally, MillenniumOS | mos-release-v0.2.3.zip |
0.2.3 |
REFERENCE-SKR3-EZ-5160
Notes
For machines using the SKR3-EZ (h723), external BTT 5160 drivers and 3A/phase or higher NEMA23 motors. WARNING: Do not use with other 5160 drivers unless they have the same sense resistor value of 0.022Ω!
Contains
Component | Source File(s) | Version |
---|---|---|
RepRapFirmware | firmware_skr3ez_h723.bin |
3.5.2 |
DuetWiFiServer | WiFiModule_esp32.bin |
3.5.2 |
DuetWebControl | DuetWebControl-SD.zip |
3.5.2 |
Configuration | milo-v1.5/common and milo-v1.5/reference-skr3-ez-5160 |
v0.3.0 |
Optionally, MillenniumOS | mos-release-v0.2.3.zip |
0.2.3 |
What's Changed
- Clarify upgrade notes by @benagricola in #32
- Add
user-config.g
example file and loader by @benagricola in #33 - Switch to
3.5.2-rc1
RRF by @benagricola in #34 - Fix release issues by @benagricola in #35
- Make release process quieter by @benagricola in #36
- Update to full 3.5.2 release by @benagricola in #37
- Remove WiFi flash changes, issue is more complex by @benagricola in #39
Full Changelog: v0.2.0...v0.3.0
RRF Configuration v0.2.0
Release v0.2.0
Upgrading
- You can upload any of these release zip files from Duet Web Control (DWC), via the "Files -> System" link in the menu.
- NOTE: If you upload the file via DWC and click 'Yes' to upgrade, the WiFi module will be flashed twice. There is currently no way around this, we need to do this to support extracting the file directly to the SD card for initial installations.
- The first time your machine reboots after installing the new release, it will switch back into Access Point mode and will not connect to your WiFi network if it was configured to do so - this is because WiFi network details might be wiped when the WiFi module is updated, and bringing the board back up in AP mode allows recovery without having to connect over USB.
- You can connect to the access point using the password in the documentation, and check if your WiFi network details need to be re-added using M587.
- You may then reboot, and the machine will revert to the existing configuration in
network-default.g
ornetwork.g
(if you have one). - Please see below for details of what is included in each release.
Milo V1.5
LDO-KIT-FLY-CDYV3
Notes
For machines built from the LDO kit using the Fly CDYv3, TMC2209 drivers and the LDO supplied motors capable of 3A/phase.
Contains
Component | Source File(s) | Version |
---|---|---|
RepRapFirmware | firmware_cdy3_f4.bin |
3.5.1 |
DuetWiFiServer | WiFiModule_esp32.bin |
3.5.1 |
DuetWebControl | DuetWebControl-SD.zip |
3.5.1 |
Configuration | milo-v1.5/common and milo-v1.5/ldo-kit-fly-cdyv3 |
v0.2.0 |
Optionally, MillenniumOS | mos-release-v0.2.2.zip |
0.2.2 |
REFERENCE-FLY-CDYV3
Notes
For machines built from the Millennium Machines BOM using the Fly CDYv3, TMC2209 drivers and smallest NEMA23 motors.
Contains
Component | Source File(s) | Version |
---|---|---|
RepRapFirmware | firmware_cdy3_f4.bin |
3.5.1 |
DuetWiFiServer | WiFiModule_esp32.bin |
3.5.1 |
DuetWebControl | DuetWebControl-SD.zip |
3.5.1 |
Configuration | milo-v1.5/common and milo-v1.5/reference-fly-cdyv3 |
v0.2.0 |
Optionally, MillenniumOS | mos-release-v0.2.2.zip |
0.2.2 |
REFERENCE-SKR3-EZ-5160
Notes
For machines using the SKR3-EZ (h723), external BTT 5160 drivers and 3A/phase or higher NEMA23 motors. WARNING: Do not use with other 5160 drivers unless they have the same sense resistor value of 0.022Ω!
Contains
Component | Source File(s) | Version |
---|---|---|
RepRapFirmware | firmware_skr3ez_h723.bin |
3.5.1 |
DuetWiFiServer | WiFiModule_esp32.bin |
3.5.1 |
DuetWebControl | DuetWebControl-SD.zip |
3.5.1 |
Configuration | milo-v1.5/common and milo-v1.5/reference-skr3-ez-5160 |
v0.2.0 |
Optionally, MillenniumOS | mos-release-v0.2.2.zip |
0.2.2 |
What's Changed
- Update release note generation by @benagricola in #29
- Check that endstops are actually triggered during homing by @benagricola in #28
- Add missing fans.g config by @benagricola in #30
- Put upgrade notes above release contents by @benagricola in #31
Full Changelog: v0.2.0-rc4...v0.2.0