Skip to content

JoosepAlviste/parrot-mania

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

18 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

README for Parrot mania

TODO: verify that the following info is correct:

  • Python: 3.6
  • DB: PostgreSQL 10
  • Node: 10.15.1
  • React: 16.8+

Browser support is defined in the parrot_mania/browserslist file that is used for autoprefixing CSS.

Setting up development

Installing Docker and Docker Compose

Refer to original Docker documentation for installing Docker.

After installing Docker you need to install Docker Compose to run multi-container Docker applications (such as ours). The curl method is preferred for installation.

To run Docker commands without sudo, you also need to create a Docker group and add your user to it.

Installing pipenv

To ensure correct project dependencies are resolved pipenv is required to be installed locally. Easiest way is to create virtualenv for this. Keep this active when doing make setup or any time adding dependencies to project.

Check commands info for pipenv helpers.

Setting up Parrot mania

The easy way is to use make to set up everything automatically:

make setup

This command:

  • copies PyCharm project directory
  • creates local settings file from local.py.example
  • builds Docker images
  • sets up database and runs Django migrations
  • runs docker-compose up

Refer to Makefile to see what actually happens. You can then use the same commands to set everything up manually.

Running development server

Both docker and docker-compose are used to run this project, so the run command is quite straightforward.

docker-compose up

This builds, (re)creates and starts containers for Django, Node, PostgreSQL and Redis. Refer to docker-compose.yml for more insight. Django app is running on 3000 port. Front-end server is running on 8000 port. For more information see SPA docs

Logs from all running containers are shown in the terminal. To run in "detached mode", pass the -d flag to docker-compose. To see running containers, use docker-compose ps. To see logs from these containers, run docker-compose logs.

To stop all running containers, use

docker-compose stop

This stops running containers without removing them. The same containers can be started again with docker-compose start. To stop a single container, pass the name as an extra argument, e.g. docker-compose stop django.

To stop and remove containers, run

docker-compose down

This stops all running containers and removes containers, networks, volumes and images created by up.

Using a different configuration file

By default docker-compose uses the docker-compose.yml file in the current directory. To use other configuration files, e.g. production configuration, specify the file to use with the -f flag.

docker-compose -f docker-compose.production.yml up

Note that the production configuration lacks PostgreSQL, since it runs on a separate container on our servers.

Running Django commands in Docker

docker-compose run django python manage.py <command>

Command shortcuts in the Makefile

Action Makefile shortcut Actual command
Installing Python dependencies make py-install-deps cmd=<dependency> pipenv --python=$(PYTHON) install $(cmd)
Generate Pipfile.lock make Pipfile.lock pipenv --python=$(PYTHON) lock
Check Python package security warnings make pipenv-check pipenv --python=$(PYTHON) check
make migrations make makemigrations cmd=<command> docker-compose run --rm django ./manage.py makemigrations $(cmd)
migrating make migrate cmd=<command> docker-compose run --rm django ./manage.py migrate $(cmd)
manage.py commands make docker-manage cmd=<command> docker-compose run --rm django ./manage.py $(cmd)
any command in Django container make docker-django cmd=<command> docker-compose run --rm django $(cmd)
run tests make test docker-compose run --rm django py.test
run linters make quality
run StyleLint make stylelint docker-compose run --rm node yarn stylelint
run ESLint make eslint docker-compose run --rm node yarn lint
run Prospector make prospector docker-compose run --rm django prospector
run isort make isort docker-compose run --rm django isort --recursive --check-only -p . --diff
run psql make psql docker-compose exec postgres psql --user parrot_mania --dbname parrot_mania
generate docs make docs docker-compose run --rm django sphinx-build ./docs ./docs/_build

Running commands on the server

docker-compose -f docker-compose.production.yml run --rm --name parrot_mania_tmp django python manage.py <command>

Installing new pip or npm packages

Since yarn is inside the container, currently the easiest way to install new packages is to add them to the package.json file and rebuild the container.

Python dependencies are a bit special. As we are using pipenv best option is to use make py-install-deps cmd=<dependency>. After package is added also don't forget to make Pipfile.lock to update lock file. This ensure when we are building production images we don't install conflicting packages and everything is resolved to matching version while developing.

When using pipenv via make file it will create the virtualenv under project directory. To use pipenv manually without Makefile, prefix pipenv commands with PIPENV_VENV_IN_PROJECT=1.

Rebuilding Docker images

To rebuild the images run docker-compose build. This builds images for all containers specified in the configuration file.

To rebuild a single image, add the container name as extra argument, e.g. docker-compose build node.

Swapping between branches

After changing to a different branch, run docker-compose up --build. This builds the images before starting containers.

If you switch between multiple branches that you have already built once, but haven't actually changed any configuration (e.g. installed new pip or npm packages), Docker finds the necessary steps from its cache and doesn't actually build anything.

Running tests

You can also use --reuse-db or --nomigrations flags to the actual command above to speed things up a bit. See also: https://pytest-django.readthedocs.org/en/latest/index.html

Generating documentation with Sphinx

To build .rst files into html, run make docs. View the documentation at /docs/_build/index.html. Read more about contributing to docs from /docs/contributing.rst.

Coverage

You can also calculate tests coverage with coverage run -m py.test && coverage html,

TODO: Expose this directory outside of docker the results will be in cover/ directory.

Running linters

Linters check your code for common problems. Running them is a good idea before submitting pull requests, to ensure you don't introduce problems to the codebase.

We use ESLint (for JavaScript parts), Prospector (for Python), StyleLint (for SCSS), isort (for Python imports) and Pipenv check (for security vulnerabilities).

To use them, run those commands in the Django app dir:

# Check Javascript sources with ESLint:
make eslint
# Check SCSS sources with StyleLint:
make stylelint
# Check Python sources with Prospector:
make prospector
# Check Python imports with isort:
make isort
# Check Python package security vulnerabilities:
make pipenv-check
# Run all of above:
make quality

Running tests

Tests are ran by pytest and jest test runners for python and javascript respectively. They can be run with the makefile via make test.

Django translations

Project contains two commands for updating and compiling translations. Those two are make makemessages and make compilemessages. Howewer if you are adding a new language or are creating translations for the first time after setting up project, you need to run different command to create the initial locale files. The command is add-locale. After you have used this command once per each new language you can safely use makemessages and compilemessages

Deploys

Python 2 environment

We use Fabric for deploys, which doesn't support Python 3. Thus you need to create a Python 2 virtualenv. It needn't be project specific and it's recommended you create one 'standard' Python 2 environment which can be used for all projects. You will also need to install django and tg-hammer==0.6, our fabric deployment helper.

Server setup

Your server needs to have Docker Engine as well as Docker Compose installed.

We also assume that you have Nginx and Postgres (version 10 by default) running in Docker containers and reachable via 'private' network. We also make a few assumptions regards directories that will be used as volumes for static assets, etc. You can find these paths in fabfile.py and docker-compose.production.yml.

Types of deploys

There are basically two types of deploys:

  • initial deploy, where the project doesn't exist in the server yet.
  • incremental deploy, where the project only needs to be updated.

Incremental deploy

  • Ensure that whatever you want deployed is committed and pushed.
  • Just run fab ENV deploy where ENV is either test or live. You'll see the changes to be applied and can continue or abort.
    • You can specify revision (either id or branch name) by running fab ENV deploy:id=REV Future deploys will stick to the same branch/rev and you'll need to explicitly deploy master/default branch to get back to it.

Initial deploy

  • Figure out which server you're going to deploy to. We usually have one main test server and one main production server for new project.

  • Check fabfile.py in Django project dir. It has two tasks (functions) - test and live. Ensure that the one you'll use has correct settings (mostly hostname).

  • Check django settings (settings/staging.py and/or settings/production.py) and Nginx config (deploy/nginx/*.conf, deploy/letsencrypt/*.conf) - ensure that they have proper hostnames etc.

  • Add the server's SSH key (/root/.ssh/id_rsa.pub) to the project repo as deployment key.

  • Ensure you've committed and pushed all relevant changes.

  • Create the bucket for media files:

    • Bucket name: parrot_mania-{ENV} where ENV is either staging or production.

    • Region: Closest to the users of the project.

      • Don't forget to change AWS_S3_REGION_NAME to the correct one
    • Public access settings:

      • Block new public ACLs and uploading public objects (Recommended) = False
      • Remove public access granted through public ACLs (Recommended) = False
    • Properties:

      • Default encryption - AES-256
      • It's nice to add tags
    • Create a new user:

      • Go to AWS IAM.
      • Click "Create new users" and follow the prompts.
      • Leave "Generate an access key for each User" selected.
      • It's nice to add tags
    • Get the credentials:

      • Go to the new user's Security Credentials tab.
      • Click "Manage access keys".
      • Download the credentials for the access key that was created.
      • and Save them somewhere because no one will ever be able to download them again.
      • Get the new user's ARN (Amazon Resource Name) by going to the user's Summary tab. It'll look like this: "arn:aws:iam::123456789012:user/someusername".
    • Go to the bucket properties in the S3 management console.

    • Add a bucket policy that looks like this, but change "BUCKET-NAME" to the bucket name, and "USER-ARN" to your new user's ARN. This grants full access to the bucket and its contents to the specified user:

      {
          "Statement": [
              {
                  "Action": "s3:*",
                  "Effect": "Allow",
                  "Resource": [
                      "arn:aws:s3:::BUCKET-NAME/*",
                      "arn:aws:s3:::BUCKET-NAME"
                  ],
                  "Principal": {
                      "AWS": [
                          "USER-ARN"
                      ]
                  }
              }
          ]
      }
    • When receiving signature we calculated does not match error

      • waiting should fix this, around 1-2 hours max
      • files should still have been uploaded
        • can be confirmed by removing url params in browser (?X-Amz-Algorithm=....)
    • More information about working with S3 can be found here.

  • Run fab ENV setup_server where ENV is either test or live.

    • If it worked, you're all done, congrats!
    • If something else broke, you might need to either nuke the code dir, database and database user on the server; or comment out parts of fabfile (after fixing the problem) to avoid trying to e.g. create database twice. Ouch.

Updating packages in pipenv

  • make sure you have pipenv installed
  • Update packages in Pipenv file
  • run pipenv lock if it successfully generates lock file, then you are set
  • if previous command fails (due to package version clash), then do as it suggests - install the packages using the commands given and see what version is installed.

Using pipenv locally for pycharm

  • run pipenv install locally. Given, that you have pipenv installed.
  • When you ran previous command, it told you where it created the virtual environment something like /home/you/.virtualenvs/projectname-somehash
  • if you missed it you can see it by running pipenv run which python
  • Open your project in pycharm and under settings search of project interpreter or just interpreter. Pycharm is smart enough and should already have picked up your venv location but just in case you can make sure it matches the path you saw when you ran the install command