Joy-Con Toolkit v5.2.0

Near Infrared Camera

• Add live configuration when streaming
• Add many new IR settings (de-noise, led intensity, strobe lights, etc)
• Change custom IR sensor registers
• Auto exposure mode (This is done manually, so it's experimental. Expect bugs).

User Calibration Editing

• Add Accelerometer/Gyroscope user calibration editing
• Add Stick device factory parameters editing. Helps when you have drifting issues, that can't be fixed by calibrating the stick. Just raise the deadzone value.

Debugging / Troubleshooting

Add 2 command line options:

• -d: Dumps the communication packets into a log text file
• -f: Forces the app to not check for connection again. Helps in some cases that the app reports that the controller was disconnected.

Others

• Organize the IR/Playground/Calibration panels a little better
• Many bugfixes and optimizations

Joy-Con Toolkit v5.0.0

Near Infrared Camera

Look through the IR camera of the Joy-Con (R) controller

• Capture and save a photo or Stream video
• Fully configurable
  Resolution, IR leds, Exposure time, Digital gain and External IR light filter (filters lighters/candles, sunlight, etc.)
• 4 color filters to choose: Grey, Ironbow (pseudothermal color), Night vision (green) and Red

NFC

• Check simple info (type and uid) from NFC tags, credit cards and nfc-enabled phones via the Pro controller and Joy-Con (R)

Edit analog sticks user calibration

• Edit the analog stick's X/Y ranges and centers. All controllers are supported.
  This can correct accidental walking and slow running when the switch's calibration does not let you calibrate them correctly.

Updated color edit

• You can now edit the Grips color for the Pro controller individually along the body and buttons color.
  (Viewing the grips color is only supported in Switch update 5.0.0+)
• The controller preview is now optimized and way faster

Other

• Added traffic logging by using the command line argument -d
• Made it fully non-blocking. Now the app will mostly not hang when the controller is disconnected when it does an operation
• Countless bugfixes and optimizations

Joy-Con Toolkit v3.0.2

Hotfixes

• Implemented mitigations for Pro Controller erratic/random behavior of x3F input reports.
  Now certain read/write SPI commands will be more difficult to be skipped.
• Added error checking for read/write SPI commands and user inform messages when these happen.
• Some bugfixes/protections

Joy-Con Toolkit v3.0.1

Removed redundant testing code that broke compilation.
Oups :D

Joy-Con Toolkit v3.0.0

Joy-Con Color Picker

The crappy old windows color dialog is now gone!
Joy-Con Color Picker supports the following:

• Beautiful dark design
• Adobe style color picker, with different color spectrums for each mode and arrows/mouse wheel support.
• HEX input
• Eyedropper. Pick any color on your screen!
• Choose both Body and Buttons colors in one screen
• Presets that you can name. Save up to 16 retail custom colors and 32 user custom colors.
• Legacy support. It will automatically load your old saved presets and save them to the new config format.
• New config xml layout, which has the color in HEX RGB along with the preset name.
• Modular support. With some small changes it can be reworked to fit your project!

High DPI scaling support

• Every control is now reworked so it will scale with your Windows DPI setting.
• Forget any blurred look or out of bounds text.

Smoother controller preview image

• The preview box that you can check how the controller will look like with the new colors is now reworked.
• It now produces nice HQ images with smooth color transition and no more color spots.

Other

• Many bugfixes and code refactoring!
• Fully support Windows 10 (Fall Creators Update)

Important

You will now need the following for the app to work

• Microsoft Visual C++ 2017 (x86) Redistributable (All Windows versions)
• Microsoft .NET Framework 4.7.1 (for Windows lower than Windows 10)
  And as always, check here for the executable binaries!

Joy-Con Toolkit v2.5.1

• Full featured controls, motion sensor and calibration readings. Check your user or factory calibrations, test buttons, stick and motion sensors raw and calibrated readings.
• Temperature readings. Check your current Joy-Con temperature or the ambient temperature (by leaving it alone for some minutes).
• Added Battery Voltage reading.
• Added Pro controller buttons color support
• Small redesign of some parts for better UX
• Added Refresh and Disconnect buttons.
• You can now change on the fly different Joy-Con without the need to close the toolkit for refreshing info, or just refresh temperature/battery/etc. Additionally "Disconnect" also reboots your device.
• Added Red Joy-Con body and buttons colors. Thanks to SciresM. If you want to keep your custom colors, add them manually: 225,15,0 | 40,10,10.
• Added New Easter Egg. Happy SMO release!
• Countless bugfixes and improvements

Joy-Con Toolkit v2.0

• Full featured bnvib and jcvib HD Rumble Player. Also added EQ and support to Loop .bnvib format.
• Full Debug reply report. You can now check buttons/joystick/battery from the received packet.
• Added S/N protection mechanism. With the first S/N change, it now saves it in an unused area inside your SPI. If you already changed it, it will not trigger. You need to restore it from a backup and then change it back.
• Added option to restore it from inside the SPI. Needs the above. Otherwise you can still restore it from your SPI backup.
• Battery percent based on regulated voltage reported from the device.
• Now Joy-Con (R) and Pro Controller utilize the HOME led. Heartbeat = Standby/Awaiting command, Breathing = Doing stuff.

Joy-Con Toolkit v1.5.2

Fixed a major compatibility issue with newest shipments of Joy-Con. Previously we were expecting 2 FW Ram Patches inside the SPI dump. New Joy-Con have only 1 like Pro. This was triggering a "Backup is corrupt" message, even though the backup was perfect.

Revambed the debug and made it like a normal feature a little bit. Added sent subcmd/arguments windows and you can now send 25byte subcmd arguments (this fixes the HOME LED).

Some bugfixes