Skip to content

Build tools to facilitate building OpenWRT + MFW

License

Notifications You must be signed in to change notification settings

untangle/mfw_build

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

License: GPL v2 ReadTheDocs

Building OpenWrt with the MFW Feed

The steps below describe building an OpenWrt x86 image with support for running packetd. This is accomplished by pulling in a custom feed with the packetd application and a couple of dependencies.

The Docker build method uses a volume to perform the build, you can mix both methods at any time: the build results will always be on your local disk.

Please note that the classd component is not free software, so in order to build MFW you'll need to:

  1. fork mfw_feeds
  2. create a personalized branch in that fork, where you'll set CONFIG_PACKAGE_classd=n in configs/common/packages.
  3. point your MFW-patched OpenWrt clone to that branch (more instructions below)

Building in Docker:

Grab the MFW-patched OpenWrt git repository, and the tools:

git clone https://github.com/untangle/mfw_build.git
git clone https://github.com/untangle/openwrt.git
cd openwrt

If you're not an Untangle employee, and you do not have access to the classd repository, this is where you point to a feed that has classd disabled:

perl -i -pe 's|https://github.com/untangle/mfw_feeds.git.*|https://github.com/mylogin/mfw_feeds.git;branch-without-classd|'

Build it for your intended device and libc targets:

docker-compose -f ../mfw_build/docker-compose.build.yml run build (-d x86_64|wrt1900|wrt3200|omnia, -l musl|glibc, -m "-j 32") 

The OpenWrt documentation warns that building with -jN can cause issues. If you hit a failure with -jN the first thing to do is to rerun with -j1. Adding V=s increases verbosity so that you'll have output to look at when/if something still fails to build:

docker-compose -f ../mfw_build/docker-compose.build.yml run build (-d x86_64|wrt1900|wrt3200|omnia, -l musl|glibc) -m "-j1 V=s"

Building directly on a Buster host:

Install build dependencies:

apt-get install build-essential curl file gawk gettext git libncurses-dev libssl-dev openssh-client python2.7 python3 qemu-utils rsync ruby-sass swig time unzip wget zlib1g-dev 

Grab the MFW-patched OpenWrt git repository, and the tools:

git clone https://github.com/untangle/mfw_build.git
git clone https://github.com/untangle/openwrt.git
cd openwrt

Build it for your intended libc target:

../mfw_build/build.sh [-d (x86_64|wrt1900|wrt3200|omnia)] [-l (musl|glibc)] [-v (<branch>|<tag>|release)] [-m "-j 32"]

The OpenWrt documentation warns that building with -jN can cause issues. If you hit a failure with -jN the first thing to do is to rerun with -j1. Adding V=s increases verbosity so that you'll have output to look at when/if something still fails to build:

../mfw_build/build.sh [-d (x86_64|wrt1900|wrt3200|omnia)] [-l (musl|glibc)] [-v (<branch>|<tag>|release)] -m "-j1 V=s"

Building one component from a specific repository/branch

All the variables listed in pkg_source.env can be set in the calling shell, in order to build some components from a different repository and/or branch than the rest of the build.

For instance, to build packetd from a different source:

PKG_SOURCE_URL_packetd=https://github.com/sdelafond/packetd PKG_SOURCE_VERSION_packetd=some-branch docker-compose -f $mfw_b/docker-compose.build.yml run build -d x86_64 [...]

Setting up a VM

If everything built correctly you should have a gzipped image in the bin directory (to use with for instance QEMU):

gunzip bin/targets/x86/64*/openwrt-x86-64-combined-ext4.img.gz

There is also a VirtualBox disk image:

bin/targets/x86/64*/openwrt-x86-64-combined-ext4.vdi

Read further instructions below for VirtualBox

In QEMU

To launch OpenWrt x86_64 in QEMU, make sure br0 is a pre-existing bridge with external access. On my machine, it looks like this, with eth0 being the actual physical interface connected to my network:

# ip ad show br0
3: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether e0:cb:4e:a9:80:64 brd ff:ff:ff:ff:ff:ff
    inet 172.17.17.6/24 brd 172.17.17.255 scope global br0
       valid_lft forever preferred_lft forever
# ip ad show eth0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UP group default qlen 1000
    link/ether e0:cb:4e:a9:80:64 brd ff:ff:ff:ff:ff:ff

Then run something like (br10 will be created dynamically):

~/ngfw_pkgs/untangle-development-kernel/files/usr/bin/ut-qemu-run -f openwrt-x86-64-combined-ext4.img -b br0 -c br10 -t g

In Virtualbox

Create a new VM using the vdi image, but do not boot it before changing its network settings: you want the 1st interface to be some some of an internal net, without a need for connectivity (this will be eth0, which OpenWrt uses as its internal interface), and the 2nd interface should ideally be bridged (this will be eth1, used as the external interface by OpenWrt)

Beware: SSH will by default not require a password!

Running the image

Accessing the host

You can now ssh into your the host's eth1 IP, which it should have grabbed from DHCP through your bridged interface:

ip ad show eth1

Using the OpenWrt admin UI

You can also install the OpenWrt admin UI if you need it:

opkg update
opkg install uhttpd
opkg install luci

Installing extra programs

Other useful programs can also be added, for instance:

opkg install tcpdump

Trying out packetd

packetd is started by default by procd and listens on port 8080 for now.

You can stop it with:

/etc/init.d/packetd stop

To run it in the foreground where you can see debugging output just run:

packetd

Developer info: maintaining untangleinc/mfw:x86-64 in DockerHub

Using a build from 2019-03-20 as an example:

cd build
docker build -f Dockerfile.test.mfw --build-arg ROOTFS_TARBALL=mfw-x86-64-generic-rootfs_v0.1.0beta1-44-g1003464fea_20190321T0728.tar.gz -t untangleinc/mfw:x86-64_20190320 .
docker tag untangleinc/mfw:x86-64_20190320 untangleinc/mfw:x86-64 
docker push untangleinc/mfw:x86-64 

About

Build tools to facilitate building OpenWRT + MFW

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published