SSD365VSAddins in Power Platform admin enabled DEV VM?

[LakshmiVijay79]

Hi Shashi,
SSD365VS addins - while installing we need to locate the Dynamics config file but not sure where it is located in Power platform admin enabled D365 F&O Dev VM

[shashisadasivan]

Hi Shashi, SSD365VS addins - while installing we need to locate the Dynamics config file but not sure where it is located in Power platform admin enabled D365 F&O Dev VM

Hi @LakshmiVijay79 , i havent tested this with UDE, so it will be VS2022 as well i assume?
However, the config file is usually saved under C:\Users<username>\Documents\Visual Studio Dynamics 365\DynamicsDevConfig.xml

If you can see that in your machine, then the best way would be to install it via the install script (instead of manually doing it)
use Option1: How to install the extension

If this doesnt work, then let me know if you are happy to jump into a call to sort this out.

[LakshmiVijay79]

thanks Shashi for the quick response. I tried to find out the same folder(Dyanmics 365) but in that no config file found. Earlier, i did the same for LCS VMs and installed manually. Also note that, when I try to run the Power shell script to install, multiple errors occurred. Thanks, Vijay DP

…

On Sat, Jun 1, 2024 at 4:04 AM Shashi ***@***.***> wrote: Hi Shashi, SSD365VS addins - while installing we need to locate the Dynamics config file but not sure where it is located in Power platform admin enabled D365 F&O Dev VM Hi @LakshmiVijay79 <https://github.com/LakshmiVijay79> , i havent tested this with UDE, so it will be VS2022 as well i assume? However, the config file is usually saved under C:\Users<username>\Documents\Visual Studio Dynamics 365\DynamicsDevConfig.xml If you can see that in your machine, then the best way would be to install it via the install script (instead of manually doing it) use Option1: How to install the extension <https://github.com/shashisadasivan/SSD365VSAddIn?tab=readme-ov-file#how-to-install-the-extension> — Reply to this email directly, view it on GitHub <#64 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BIYUNZ24DVK6SVVIBAJWBMLZFDJUBAVCNFSM6AAAAABIQZSNYWVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TMMRTGA3DO> . You are receiving this because you were mentioned.Message ID: ***@***.*** .com>

[shashisadasivan]

Hi Vijay, sorry for the extremely late reply.
I haven't had a chance to play with this in VS2022 yet.
happy to connect and look through it with you if you wish

[shashisadasivan]

@LakshmiVijay79 I have started upgrading the code for VS2022. Please follow issue #66
Let me know if any functionality fails in the process

[LakshmiVijay79]

thank you. Also noticed that while generating the labels, we are getting best practice warning saying that the label id is not aligned. EX: LabelId is not same case as the label. Kindly check it. Thanks, Vijay DP

…

On Wed, Jul 3, 2024 at 3:52 AM Shashi ***@***.***> wrote: @LakshmiVijay79 <https://github.com/LakshmiVijay79> I have started upgrading the code for VS2022. Please follow issue #66 <#66> Let me know if any functionality fails in the process — Reply to this email directly, view it on GitHub <#64 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BIYUNZ3L3INPBOTUQTHQKCTZKMAI5AVCNFSM6AAAAABIQZSNYWVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TSNBQG4YDQ> . You are receiving this because you were mentioned.Message ID: ***@***.*** .com>

[shashisadasivan]

Thanks, Could you put an example of the Generated Id and the label please
The one that gets written to the file. Thanks
Maybe open a different issue for this ! :)

[shashisadasivan]

Upgraded to VS2022 as per #66

[LakshmiVijay79]

Hi Shashi, As per my analysis , this mod wont work as we dont have dynamics config file inside UDE VMs. Please check Thanks, Vijay DP

…

On Wed, Jul 3, 2024 at 9:45 AM Shashi ***@***.***> wrote: Closed #64 <#64> as resolved. — Reply to this email directly, view it on GitHub <#64>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BIYUNZZ6IRGO4NLAKLN3BJLZKNJSPAVCNFSM6AAAAABIQZSNYWVHI2DSMVQWIX3LMV45UABFIRUXGY3VONZWS33OIV3GK3TUHI5E433UNFTGSY3BORUW63R3GEZTMOJSHAZQ> . You are receiving this because you were mentioned.Message ID: <shashisadasivan/SSD365VSAddIn/repo-discussions/64/discussion_event/1369283 @github.com>

[shashisadasivan]

Thanks @LakshmiVijay79
Once i start on a UDE environment i will update this. Until then i will create this into an issue.

[LakshmiVijay79]

thank you. Any other way, I can import as an XPP to generate labels? Thanks, Vijay DP

…

On Wed, Jul 10, 2024 at 5:25 AM Shashi ***@***.***> wrote: Thanks @LakshmiVijay79 <https://github.com/LakshmiVijay79> Once i start on a UDE environment i will update this. Until then i will create this into an issue. — Reply to this email directly, view it on GitHub <#64 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BIYUNZ6LZLEJKMVK66Z32S3ZLRIMPAVCNFSM6AAAAABIQZSNYWVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAMBQGI4TCNQ> . You are receiving this because you were mentioned.Message ID: <shashisadasivan/SSD365VSAddIn/repo-discussions/64/comments/10002916@ github.com>

[shashisadasivan]

Not at this stage. there might be some other standalone tools created for this