This section explains how to connect the Nordic Hardware Platform to EVB1000 through SPI interface.
- Turn off S2 DIP switches
- Turn off S3-1 DIP switch
- Remove the jumper J10 Make sure the pins of nRF52840 PDK and EVB1000 Device are blue wired as defined below
PIN | EVB1000 | NRF52840 |
---|---|---|
IRQ | J6: Pin4 | P0.30 |
MISO | J6: Pin5 | P0.28 |
MOSI | J6: Pin8 | P0.4 |
SCLK | J6: Pin7 | P0.3 |
CS | J6: Pin9 | P0.29 |
GND | J6: Pin10 | GND |
VDD | J10: Pin2 | VDD |