Skip to content

Latest commit

 

History

History
126 lines (94 loc) · 5.52 KB

README.md

File metadata and controls

126 lines (94 loc) · 5.52 KB

Particle-GPS

GPS library for the Particle Electron and Photon. Current version is v1.0.4.

About

Instead of porting libraries written for other platforms, this library was written from scratch using the Particle firmware. This library allows you to easily add additional sentences or support to any serial based GPS.

NMEA Output Sentences

This library will read the following NMEA sentences from the device into a buffer, but only supports parsing for the ones highlighted:

  • PGTOP (Status of antenna)
  • GGA (Time, position and fix type data)
  • GSA (GPS receiver operating mode, active satellites used in the position solution and DOP values.)
  • GSV (The number of GPS satellites in view satellite ID numbers, elevation, azimuth, and SNR values.)
  • RMC (Time, date, position, course and speed data. Recommended Minimum Navigation Information.)
  • VTG (Course and speed information relative to the ground.)

More parsing will be added in later releases. If you wish to parse additional sentences, or you need to parse custom data, take a look at Sentence.h and Sentence.cpp to see how to implement an additional parser.

Using the Library

Create the Gps Instance

Define a Gps object in your code and assign the appropriate serial port. In the example below, the serial pins on the TX and RX pins is used (Serial1).

Gps _gps = Gps(&Serial1);

Create a Timer

In order to read the serial port fast enough, a Software Timer is used. The software timer is setup to fire every 1 ms and capture data coming in on the serial pins. The line of code below creates a software timer.

Timer _timer = Timer(1, onSerialData);

In the callback function, simply call the onSerialData() method on the Gps object.

void onSerialData()
{
  _gps.onSerialData();
}

Initialize the Objects

In the setup() method, call the begin method on the Gps object.

_gps.begin(9600);

Also call the start() method of the timer.

_timer.start();

Get the Data

In the loop method, create an Nmea object for the specific data you want to read from the GPS. There are currently three NMEA sentences defined.

  1. Antenna Status ($PGTOP) => Pgtop
  2. Global Positioning System Fixed Data ($GPGGA) => Gga
  3. Recommended Minimum Navigation Information ($GPRMC) => Rmc4.

Reading Antenna Status

First create the object passing the Gps instance in the constructor.

Pgtop pgtop = Pgtop(_gps);

Next, parse the data and read the values if successful.

if (pgtop.parse())
{    
    Serial.println("1) Antenna Status ($PGTOP)");
    Serial.println("======================================================");
    Serial.print("Command ID: "); Serial.println(pgtop.commandId);
    Serial.print("Antenna Status: "); Serial.println(pgtop.reference);
    Serial.println("");
}

Global Positioning System Fixed Data

First create the object passing the Gps instance in the constructor.

Gga gga = Gga(_gps);

Next, parse the data and read the values if successful.

if (gga.parse())
{
    Serial.println("2) Global Positioning System Fixed Data ($GPGGA)");
    Serial.println("======================================================");
    Serial.print("UTC Time: "); Serial.println(gga.utcTime);
    Serial.print("Latitude: "); Serial.println(gga.latitude);
    Serial.print("North/SouthIndicator: "); Serial.println(gga.northSouthIndicator);
    Serial.print("Longitude: "); Serial.println(gga.longitude);
    Serial.print("East/WestIndicator: "); Serial.println(gga.eastWestIndicator);
    Serial.print("Position Fix Indicator: "); Serial.println(gga.positionFixIndicator);
    Serial.print("Satellites Used: "); Serial.println(gga.satellitesUsed);
    Serial.print("Horizontal Dilution of Precision: "); Serial.println(gga.hdop);
    Serial.print("Altitude: "); Serial.print(gga.altitude); Serial.print(" "); Serial.println(gga.altitudeUnit);
    Serial.print("Geoidal Separation: "); Serial.print(gga.geoidalSeparation); Serial.print(" "); Serial.println(gga.geoidalSeparationUnit);
    Serial.print("Age of Diff. Corr.: "); Serial.println(gga.ageOfDiffCorr);
    Serial.println("");
}

Recommended Minimum Navigation Information

First create the object passing the Gps instance in the constructor.

Rmc rmc = Rmc(_gps);

Next, parse the data and read the values if successful.

if (rmc.parse())
{
    Serial.println("3) Recommended Minimum Navigation Information ($GPRMC)");
    Serial.println("======================================================");
    Serial.print("UTC Time: "); Serial.println(rmc.utcTime);
    Serial.print("Latitude: "); Serial.println(rmc.latitude);
    Serial.print("North/SouthIndicator: "); Serial.println(rmc.northSouthIndicator);
    Serial.print("Longitude: "); Serial.println(rmc.longitude);
    Serial.print("East/WestIndicator: "); Serial.println(rmc.eastWestIndicator);
    Serial.print("Speed Over Ground: "); Serial.println(rmc.speedOverGround);
    Serial.print("Course Over Ground: "); Serial.println(rmc.courseOverGround);
    Serial.print("Date: "); Serial.println(rmc.date);
    Serial.print("Magnetic Variation: "); Serial.print(rmc.magneticVariation); Serial.print(" "); Serial.println(rmc.magneticVariationDirection);
    Serial.print("Mode: "); Serial.println(rmc.mode);
    Serial.println("");
}

Serial Port Debugging

Note the sample lines of code above use the serial pins connected through the USB port to send data back to the computer. Make sure the following line of code is included in your setup().

Serial.begin();