From f1041fed2d64597ed61f2065e47d40bafd4c1631 Mon Sep 17 00:00:00 2001 From: DamonHD Date: Fri, 31 May 2019 14:23:55 +0100 Subject: [PATCH] MH text --- .../RRAT-REV19/background/ASSEMBLY-NOTES/README.txt | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Arduino/hardware/RRAT-REV19/background/ASSEMBLY-NOTES/README.txt b/Arduino/hardware/RRAT-REV19/background/ASSEMBLY-NOTES/README.txt index d2a5561e..39d81ecf 100644 --- a/Arduino/hardware/RRAT-REV19/background/ASSEMBLY-NOTES/README.txt +++ b/Arduino/hardware/RRAT-REV19/background/ASSEMBLY-NOTES/README.txt @@ -1,11 +1,11 @@ Notes for RRAT REV A board assembly. DHD20190531 -Pi/HAT connector us underneath board. -All other components are on the top of the board. - -DO NOT FIT zero-value caps: +1) 40 pin connector J3 to be attached to underside of board, not topside. +2) All other components are on the top of the board. +3) DO NOT FIT: zero-value caps: * Xtal load caps: C11, C12. * Power decoupling cap: C13. - \ No newline at end of file + * Connectors J1, J2, J4 +4) Antenna trace ANT1 to be 50 ohm impedance \ No newline at end of file