compatibility with MST2_EU_SE_ZR_P0514T

[hichem5]

Hello,
Thank you for the effort you are making.
I wanted to know if the MIB2_STD is compatible with MST2_EU_SE_ZR_P0514T.
If so, what is the best way to install the software since the hardware version is H50 and the software version is 0514.
Thanks in advance

[Medmimoza]

Quote "
NOTE: This SD installation method is NOT possible on Seat cars with VC type instrument cluster and HW H40+, H50+ units (firmwares 04xx, 05xx) also known as variants 47213, 47214, 47215, 47216. Metainfo2.txt of the Toolbox does not contain these variant numbers. Metainfo2.txt cannot be edited because has digital signature at the end of the file. The ONLY KNOWN way to install Toolbox onto this kind of units is soldering USB SD card reader to eMMC.
" Unquote

[Medmimoza]

Don't think so, to only know method to install toolbox is via emmc

[hichem5]

thank you for your answer.
My goal is to activate the Carplay and I do not find other solution unfortunately, there is no tuttorial how to install via emmc?

[Medmimoza]

To use emmc you need soldering skills and special reader to read Emmc

[hichem5]

one last question please, as I don't have the skills to do soldering, won't Telnet communication be a way to flash the software?

[Medmimoza]

Nop, need to open unit in your case, look for someone in your area

[cseryz]

Hello,
I'm facing with the same issue, having the same HW and software version on my infotainment.
Can You please tell if I can install toolbox with "USB2HSD aka solderless methode".
https://www.drive2.com/b/646562041351386364/
I have gathered all the tools to complete via that way but i dont want to ruin my device.
My primary goal is to have Fullink/Android Auto activated as it is disabled now, 2nd target is to have the offline map refreshed - currently it doesn accept any newer than 2018/19. If you can advise any alternative solution to succeed i would be graterfull too.
Thank You,
Cseryz

[t7ank]

Hi,
I have same SW train/HW/unit (0514T/H50/5F0035877A).
I know how to solder, but can find any detailed steps how to do the other stuff later. I have read Drive2 Russian page, but I'm not confident enough there are all the steps written.
Same for the USB2HSD method, is there any detailed tutorial, except from the 4min video on mibsolution webpage?

Third question @olli991, is it possible for HW50, that toolbox would be integrated in the firmware update? So I have 514T SW train, would it be possible to have toolbox integrated into 516T(latest FW), so unit would also get patched during the FW update?
Thank you for this repo and all the work!

MST2_EU_SE_ZR_P0514T
HW50
5F0035877A

[olli991]

Integration for 05xx firmware is sadly not possible. Our backdoor don't work there. That's why you need HSD2USB or soldering on that trains