Performance Monitor

[HolzFichte]

Hi :)
Great Tool! Is it also possible to activate Performance Monitor? Patch for SWAP works great for App Connect and Voice Controll!

Thx.

[olli991]

if you've patched swap you need to add the fec for Sport Monitor manually later via diagnostics

[HolzFichte]

So i need VCP/OBD/.... because VCDS dosent support FEC i think.

[nirvananils]

Sure you can do with VCDS, only need genuine Interface with Version 22.3.1

[lprot]

Sure you can do with VCDS, only need genuine Interface with Version 22.3.1

Can you please provide the proof of your statement? From which version did VCDS start to support sending FEC codes?

[nirvananils]

Here's your proof ;-) It starts with VCDS 22.3.1 as I wrote in post above.

[gourtz]

hello. i try it today with vcds and it says out of range can i take something ? mib 2 patched

[DoTriN7]

Hi @gourtz,

This error may occur when the EOL (End Of assembly Line) mode is not enabled. When enabled, Transfer of Release for SWaP functions should work.

Do you have a genuine VCDS? If so, you should be able to post and send PMs to people in Ross-Tech's forum. One person knows how to enable EOL but doesn't want to share it publicly. He only shares the steps when contacted privately. See the link below :

https://forums.ross-tech.com/index.php?threads/30123/post-274612

[lprot]

But to send this code you anyway need to enter EOL mode first. How you do it in your VCDS?

[gourtz]

it has this feauture to vcds but dont work for me. i make it with odis . by the way i have already activated the performance monitor all works fine except boost. its always zero

[B-Billberry]

I'm using VCDS 22.3.1, just updated to 478T on my unit and trying to reactivate my performance monitor and driving data menus (disappeared with the update), however on that channel I get a channel not available error :(

[HolzFichte]

I would say u need an genuine Interface. :D

[B-Billberry]

I would say u need an genuine Interface. :D

It is genuine 👍

[lprot]

If you already patched SWAP in Toolbox>Tools menu, the Performance Monitor, AKA SportHMI, can be activated via:

1. CarScanner and ELM327 adapter https://www.drive2.com/l/637023228224609376/
2. VCDS 22.3.1.4 or newer and HEX-V2 original or clone cable. To do it, open VCDS, enter into block 5F and type on the keyboard M40Q
   This keyword will enable EOL mode that will allow to write the SWaP code into the adaption of block 5F.