Skip to content

Latest commit

 

History

History
119 lines (84 loc) · 7.49 KB

README.md

File metadata and controls

119 lines (84 loc) · 7.49 KB

fatfs

A standalone FAT16/FAT32 implementation that takes in a block-access interface and exposes something quite similar to require('fs') (i.e. the node.js built-in Filesystem API).

Installation

npm install fatfs

Example

var fatfs = require('fatfs'),
    fs = fatfs.createFileSystem(exampleDriver);      // see below
fs.stat("autoexec.bat", function (e,stats) {
    if (e) console.error(e);
    else console.log(stats);
});
// TODO: open a file and write to it or something…

API

  • fs = fatfs.createFileSystem(vol, [opts], [cb]) — Simply pass in a block driver (see below) mapped to a FAT partition somewhere, and get back the API documented here. An options dictionary can be provided, details are in the next section. You may also optionally provide a callback cb(err) which will be automatically registered for the on 'ready' or 'error' event.
  • 'ready' event — fired on fs when initial volume information has been determined and the API is ready to use. It is safe to call other fs methods before this fires only if you are sure the first sector will be readable and represents a valid FAT volume.
  • 'error' event — fired if initialization fails for whatever reason.

Filesystem options

The opts dictionary you pass to fatfs.createFileSystem can contain any of the following options:

  • ro — Enables readonly mode if true. It defaults to false, but if your volume driver does not provide a writeSectors method it will be overriden to true.
  • noatime — The FAT filesystem can track the last access time (just a date, actually) but this means every read operation would also incur some write overhead. Defaults to true, meaning by default access times will not be updated on reads. Set this to false to track access times.
  • modmode — chooses how fs.chmod (and the mode field from fs.stat–family calls) should map FAT attributes to POSIX permissions. Set to the number 0111 to map the readonly flag to the user's write bit being unset, and the archive/system/hidden flags to the user/group/other executable bits respectively. Set to the number 07000 to map the readonly flag to all write bits being unset, and the archive/system/hidden flags to the sticky/setgid/setuid bits respectively. Set to null for readonly mapping. Defaults to 0111.
  • umask — any bits set in this octal number will be unset in the 'mode' field from fs.stat–family calls. It does not affect anything else. Defaults to process.umask(), or 0022 if that is unavailable.
  • uid — This value will be returned as the 'uid' stat field. It does not affect anything else. Defaults to process.getuid(), or 0 if that is unavailable.
  • gid — This value will be returned as the 'gid' stat field. It does not affect anything else. Defaults to process.getgid(), or 0 if that is unavailable.

(Note that these are similar to the options you could use with a POSIX mount operation.)

And that's it! The rest of the API (fs.readdir, fs.open, fs.createReadStream, fs.appendFile, etc.) is as documented by the node.js project.

Well, sort of…

Caveats

Temporary

  • BETA BETA BETA. Seriously, this is a brand new, from scratch, completely unproven filesystem implementation. It does not have full automated test coverage, and it has not been manually tested very much either. Please please please make sure you have a backup of any important drive/image/card you unleash this upon.
  • A few methods are not quite implemented, either: fs.rename, fs.unlink and fs.rmdir, as well as fs.watchFile/fs.unwatchFile and fs.watch. These are Coming Soon™.
  • There are several internal housekeeping items (redundant FAT tables, extra FAT32 information, etc.) that are not done. These do not seem to affect interop, but you may see warnings when repairing a filesystem written by this module.
  • Oh, and not to scare you, but if an IO error happens while writing, the library usually just bails — bubbling an error up to your callback as if it were a hot potato. Although some attempt has been made to do separate writes in the safest order (e.g. allocating an additional file cluster, then appending data into it, and then finally updating the file's size), but this behavior has not been thoroughly audited for all operations. There's certainly no attempt to retry/cleanup/rollback if a multi-step change runs into trouble partway through.

As-planned

Some of the differences between fatfs and the node.js fs module are "by design" for architectural simplicity and/or due to underlying FAT limitations.

  • There are no fs.*Sync methods. (The volume driver is async, not to mention that supporting a separate *Sync codepath would be an enormous duplication of effort of dubious value.)
  • This module does [almost] no read/write caching. This should be done in your volume driver, but see notes below.
  • You'll need multiple createFileSystem instances for multiple volumes; paths are relative to each, and don't share a namespace.
  • The FAT filesystem has no concept of symlinks, and hardlinks are not really an intentional feature. You will get an ENOSYS-like error when trying to create either type of link.

"Volume driver" API

To use 'fatfs', you must provide a driver object with the following properties/methods:

  • driver.sectorSize — number of bytes per sector on this device
  • driver.numSectors — count of sectors available on this media
  • driver.readSectors(i, dest, cb) — Fill dest with data starting at the ith sector and notify cb(e) when finished. You may assume dest.length is a multiple of driver.sectorSize.
  • driver.writeSectors(i, data, cb) — (optional) Write data starting at the ith sector and notify cb(e) when finished. You may assume data.length is a multiple of driver.sectorSize.

If you do not provide a writeSectors method, then fatfs will work in readonly mode. Pretty simple, eh? And the 'fatfs' module makes a good effort to check the parameters passed to your driver methods!

TBD: to facilitate proper cache handling, this module might add an optional driver.flush(cb) method at some point in the future.

Here's an example taken from code used to run this module's own tests:

// NOTE: this assumes image at `path` has no partition table.
//       If it did, you'd need to translate positions, natch…
var fs = require('fs');

exports.createDriverSync = function (path, opts) {
    opts || (opts = {});
    
    var secSize = 512,
        ro = opts.readOnly || false,
        fd = fs.openSync(path, (ro) ? 'r' : 'r+'),
        s = fs.fstatSync(fd);
    
    return {
        sectorSize: secSize,
        numSectors: s.size / secSize,
        readSectors: function (i, dest, cb) {
            if (dest.length % secSize) throw Error("Unexpected buffer length!");
            fs.read(fd, dest, 0, dest.length, i*secSize, function (e,n,d) {
                cb(e,d);
            });
        },
        writeSectors: (ro) ? null : function (i, data, cb) {
            if (data.length % secSize) throw Error("Unexpected buffer length!");
            fs.write(fd, data, 0, data.length, i*secSize, function (e) {
                cb(e);
            });
        }
    };
};

License

© 2014 Nathan Vander Wilt. Funding for this work was provided by Technical Machine, Inc.

Reuse under your choice of: