Skip to content

Latest commit

 

History

History
75 lines (60 loc) · 2.32 KB

buildroot.md

File metadata and controls

75 lines (60 loc) · 2.32 KB
Raw

##kernel configure We use buildroot to create our kernel. Follow this tutorial if you would like to configure the kernel. Current version of the VM has .config that adds python.

###manual Only tested using Ubuntu 12.04

  1. apt-get update
  2. apt-get install build-essentials
  3. wget --no-check-certificate https://buildroot.org/downloads/buildroot-2016.02.tar.gz
  4. cd buildroot*
  5. make menuconfig
  • Save your work ~ this will generate a .config file
  1. make

Output files compressed and uncompressed will be in /output/images/

###Ubuntu 12.04 VM

Click here

##Preload data

###Preload your personal files/folders

  1. Do into ./bin/ directory in the project
  2. cp root.bin initramfs.cpio.gz
  3. gunzip initram.cpio.gz
  4. mkdir temp && cd temp
  5. cpio -idv < ../initramfs.cpio
  6. Do what ever you want to add/modify file
  • Make sure permisions are +rwx everywhere chmod -cR 777 *
  1. find . | cpio -H newc -o > ../initramfs.cpio.new
  2. cd ..
  3. cat initramfs.cpio.new | gzip > root.bin.new

###Rebuild .mcs file

using .bit + .vmlinux.bin + root.bin.new lets prepare a PROM.

#####Configure:

  1. Open iMPACT tool using ISE
  2. Open a new project
  3. Select Prepare a PROM File and click Ok
  4. Select Configure A Single FPGA and click the arrow
  5. Slect 128M (this is 128... chip, then the size will be 16 (MB).)
  6. Add Storage and click the arrow
  7. Give the second field Output File Name a name
  8. Check No on Add Non-Configuration Data Files
  9. Click Ok

#####Pick Files

  1. Click Ok on the pop up screen
  • Find .bit file of the project
  1. When it asks you to Add a Device
  • Click No
  1. When it asks you to Add Data Files
  • Click Yes
  • Give Start Address at 400000
  • Find your vmlinux file *
  1. When it asks you to Add Data Files
  • Click Yes
  • Give Start Address at 800000
  • Find your initramfs file *
  1. When it asks you to Add Data Files
  • Click No
  1. When it asks you to Add Device
  • Click No
  • Click Ok
  1. Click on Generate File
  • Click No
  1. MCS File should be generated, exit and re-enter ISE then Flash the SPI
  • TO CHECK