Skip to content

Latest commit

 

History

History
53 lines (45 loc) · 1.96 KB

README.md

File metadata and controls

53 lines (45 loc) · 1.96 KB

Terminominal

VT100 terminal emulator for Raspberry Pi Pico.

Features:

  • Composite video (CVBS) PAL video output.
  • PS/2 protocol input, with Norwegian or US keyboard layout.
  • Visible picture of 880 dots and 240 scanlines, framed by border.
  • Custom 11x10 pixel font, ISO-8859-1 (latin-1) compatible.
  • UART baud rate up to 115200 supported.
  • Passes some vttest cases at least.
  • SDL-based Linux version available for test purposes.
  • Blinking cursor!

GPIO Connections

|--------|-----------|------------|-------------------------|
| Pin No | Pin Name  | Function   | Connected To            |
|--------|-----------|------------|-------------------------|
| 1      | GP0       | UART TX    |                         |
| 2      | GP1       | UART RX    |                         |
| 6      | GP4       | PS/2 Data  | 3.3V<->5V Level Shifter |
| 7      | GP5       | PS/2 Clock | 3.3V<->5V Level Shifter |
| 21     | GP16      | CVBS DAC   | 680 Ohm Resistor        |
| 22     | GP17      | CVBS DAC   | 220 Ohm Resistor        |
| 36     | 3V3 (OUT) | +3.3V      | 3.3V<->5V Level Shifter |
| 40     | VBUS      | +5V        | 3.3V<->5V Level Shifter |
|--------|-----------|------------|-------------------------|

Compiling

Requirements:

Create a build folder and call cmake pointing to the source directory containing the CMakeLists.txt file:

mkdir build
cd build
PICO_SDK_PATH=/path/to/pico-sdk cmake /path/to/terminominal/
make

Flash the resulting "terminominal.elf" file with SWD or transfer the "terminominal.uf2" file through USB in BOOTSEL mode.

Further Reading

Information on my blog:

YouTube video: