-
Notifications
You must be signed in to change notification settings - Fork 28
Home
Welcome to the Jorne keyboard hardware wiki!
Jorne is an extended Corne with extra keys for brackets and international layouts (100% original Corne if keys snapped off).
- Hardware is here https://github.com/joric/jorne, firmware is here https://github.com/joric/qmk/wiki/jorne
- Wiki articles in the reading order: Home, Trackpoint, Topre, Status, Archive, Free PCBs
- New! Corne v4 Pro Micro edition: https://github.com/klouderone/cornev4promicroedition
Also check out my nRFMicro and Jorian. Also see Awesome Split Keyboards, Dao, Nijuni (RT-22), Chokofi, Khonsu and Mriya.
Download PCB gerbers here: jorne-classic-2.1-gerbers.zip Upload to JLCPCB (default settings, 1.6mm 2-layer PCB, 5 or 10 pcs), pay something. Order parts on Aliexpress. Read this wiki for two weeks. Get the mail. You can snap off pinky keys and use standard Corne case, if needed. How to order PCBs if you are in the sanctioned countries: https://t.me/devAlphaSierra/359
Like I said, you can go to the moon without a computer, so, you know, the thing we are talking about is 40% keyboard, which means only 40 keys. It's very hard to type Chinese, Japanse, Russian with 40% keyboard. It's like doubling your work. Yeah, you can. But if you need to type that two hours a day you gonna see a doctor within a month. (Xah Lee)
There are 3 base versions of Jorne (all versions are 44 keys, RGB, MX spacing):
- jorne-classic-2.1-gerbers.zip - reversible PCB, soldering only (no hotswap), Cherry MX or Kailh LP, north-facing. Cheapest.
- jorne-cherry-2.1-gerbers.zip - reversible PCB, hotswap only (needs Cherry MX sockets, no LP support), north-facing.
- jorne-cherry-3.0-gerbers.zip - non-reversible PCBs (left / right), hotswap only (Cherry MX, no LP support), south-facing.
The main idea behind Jorne is that it turns into Corne (same schematic/dimensions) if you snap off the extra keys.
- Jorne is a remix of Corne (by u/foostan) and Jian layout (by u/KgOfHedgehogs).
- Corne (Helidox) is a remix of Minidox (by u/That-Canadian) and Helix by (u/pluis9).
3.0 was added as a courtesy to Foostan just to have an option. I strongly recommend 2.1.
- 3.0 is more expensive, 3.0 PCB is not reversible so you need two different designs, it's about 2x the price.
- 3.0 needs two LED types which is also more expensive. SK6812MINI-E are easier to solder, but not by much.
- 3.0 south-facing switches are questionnable. Most RGB caps have legends on top so they don't work with south facing switches. Using opaque caps with RGB is dumb (they block 90% of the light). Front-printed RGB caps are pretty rare.
Aliexpress Saver shipping is combined with the Standard shipping now, so use Saver where possible to get everyhing at once.
Picture | Component name, description and buying instructions | Need | Store |
---|---|---|---|
Pro Micros (18mm wide, need 2). Black MicroUSB (recommended) and blue USB-C are compatible with the Spring pin headers, purple USB-C and blue MicroUSB are not (holes >0.85mm). Large blue USB-C don't support C-C cables. | 2 | Aliexpress | |
White OLED screens, 128x32, cost about $1.50 a pcs. | 2 | Aliexpress (Great-Wall) | |
3.5mm pin headers to hotswap displays and Pro Micros. Optional. Also see Sockets. | 2 | Aliexpress ($2.99/5) Aliexpress ($4.99/10) | |
1N4148 diodes (LL4148 substitute in SMD package). I use small 1N5819 in SOD-323 both in Jorne and nRFMicro, they work fine. You can use large 1N4148 in SOD-123, they're much easier to solder. | 44 | Aliexpress (Yanxy) | |
TRRS sockets, PJ-320A. About $1.32/20. See pinout here: TRRS. | 2 | Aliexpress (black) Aliexpress (white) | |
DIP 3x6x4.3mm tactile button. Also side buttons if you prefer those. | 2 | Aliexpress (black/white) | |
TRRS Cable, Angled, 30cm, $0.69 a pcs (15 cm may be a little bit too short). Note that any TRS 3-pin audio cable is ok, so this is optional. | 1 | Aliexpress (30cm) Aliexpress (15cm) | |
Black 3m bumpons for legs (height 3mm), also clear ones, they sell for about $1.30/100 pcs. | 10 | Aliexpress (black) Aliexpress (clear) | |
Cap head hexagon screws. Use M2 6mm (28 pcs) for the keyboard. Optional screws for tilting/tenting are M5 (2x30mm + 2x16mm). | 28 | Aliexpress ($1.70/50) Chrome Countersink Laptop | |
M2 Standoffs, 8mm for 1.5mm plate (or 6mm for 3mm plate) - 10 pcs, 10mm for OLED - 4 pcs. Nylon hexagonal standoffs are too thick for PCBs, don't buy nylon. | 14 | Aliexpress ($1.24/20) Aliexpress (inserts) | |
Jorne V2.1 only. Small 3.5x3.5 mm 3535 LEDs SK6812MINI. Pinout is NOT compatible with reverse mount SK6812MINI-E (rotated by 90). | 56 | Aliexpress ($9.54/100) | |
Jorne V3 only. Small 3.5x3.5 mm SK6812MINI-E 3535LEDs (reverse mount). Per-key only (need 44). | 44 | Aliexpress ($7.68/50) | |
Jorne V3 only. Large 5x5mm WS2812B 5050 LEDs (planar SK6812MINI-E like pinout). Ambient only (need 12). | 12 | Aliexpress ($3.45/50) | |
Kailh hotswap sockets for the hotswap version. Optional, Cherry (hotswap) versions only. Jorne doesn't support Choc sockets, only MX ones. Cost $0.10 a pcs. | 44 | Aliexpress (black) Aliexpress (white) | |
Cheapest silent 3-pin switches (I only use silent ones) by Outemu (180 CNY ~ $27 for 200 pcs ~ 13 cents a switch on Taobao, $45/200 ~ 22 cents a switch on Aliexpress). Silent grey is tactile, silent white is linear (recommended). | 44 | Reddit Taobao Aliexpress Aliexpress (cheaper) | |
Cheapest non-silent 3-pin MX switches ever, marked YUSYA. $6.15/110 ~ 5 cents a switch. Price may vary. There are other cheap noname switches, like CONTENT. | 44 | Aliexpress (YUSYA) Aliexpress (CONTENT) | |
Cheap Kailh LP (Choc, CPG1350) switches. I like red ones (yellows are too heavy, browns are too scratchy considering reduced travel). They costed $0.35 back in 2018, now the price is $0.55-0.75. They need 1.2 mm top plate to snap onto (or no plate). | 44 | Aliexpress KPRepublic MKUltra Aliexpress (superlight) | |
Cheapest backlit MX keycaps, white and black, you can buy them in bulks for about $5 a 104-key set (order by price and free shipping) | 1 | Aliexpress (direct) Aliexpress (search) | |
Optional DSA MX keycaps (Cool Jazz), many colors including translucent black, ~$0.20 a cap | 44 | Aliexpress (color) Aliexpress (black) | |
Optional expensive MDA VoID, MX keycaps with 1u Raise/Lower, made especially for 40% keyboards, $78 + shipping (use https://zenmarket.jp for shipping) | 1 | Booth.pm | |
Cheap Kailh LP Keycaps from Kailh, they sell in bulks, $15.99 a 60 pcs/lot ~ $0.26 a cap. Transparent choc keycaps are more comfortable but they're NOT Choc spacing (larger than 18x17 mm), so they won't fit Ferris etc. Buy black or white keycaps for Choc spacing (white are rather yellow-ish so maybe only buy black ones). | 44 | Aliexpress (various) Aliexpress (backlit) | |
Optional expensive MBK choc (LP) keycaps (Corne-ish Zen uses them). Choc spacing (17.5x16.5 mm). | 44 | SplitKB Littlekeyboards Boardsource | |
MBK Clone choc keycaps (Chocfox), Cost $25/50 pcs. Official dimensions are 16.5x16.5mm so they DO fit choc spacing boards (18x17mm PCBs), see chocfox site. They are square, so there are 1mm horizontal gaps on choc spacing, a bit worse than MBK. | 1 | Aliexpress Chosfox |
Note you cannot hotswap Chocs (Kailh LP) switches on Jorne, there's no PCB for Choc sockets, so soldering only.
If you want Space Invaders switches, someone discovered 2408 new old stock NMB keyboards in Germany, bought out the lot for 2408 eur. All keyboards except ~2% use Hi-Tek 725 Space Invaders (2 and 3 generation). Shipping space invaders keeb to europe starts from 30 EUR + 20 EUR for the keeb ~ 50 EUR total (GH), join discord here: https://discord.gg/9FTQhfV7uq
See https://github.com/joric/nrfmicro/wiki/Soldering
PLEASE REFER TO THIS PICTURE BEFORE ASKING QUESTIONS, GRID IS 1x1 mm.
- WARNING! Don't use 1.5mm acrylic for the top plate, it's too fragile. Use FR4, steel or aluminum.
- Don't use 6mm standoffs for 1.5mm plate because they are too short! Use 8 mm standoffs.
See Corne (Helidox) build guides (the PCB is the same, except pinky key that can be snapped off).
- https://likipiki.gitlab.io/posts/jornebuild Гайд по сборке клавиатуры Jorne (Russian)
- https://github.com/foostan/crkbd/blob/master/corne-classic/doc/buildguide_en.md
- https://thomasbaart.nl/2018/11/26/corne-keyboard-helidox-build-log
Diodes are polarized components, they have a specific orientation that has to be connected properly in order to work.
The key (a spot or a line) on the diode should match the key on the footprint, e.g. for LL4148 diodes:
TL;DR: footprints are ASYMMETRICAL. One of the pro micros is shifted one row of pins closer towards the edge.
Solder OLED jumpers from the face side only. Do NOT solder OLED jumpers from the back side, this is the same as shorting VCC and GND together.
LEFT half is different from RIGHT half. LEFT half is flush with the edge, RIGHT half is shifted 1 row of pins to the right. Controllers must be installed face down.
Remember, desoldering is much harder than soldering, so think twice before you solder something with many legs.
MJ-4PP-9 (TRRS socket, I use PJ-320A as a substitute) pinout is counterintuitive, so here is a picture:
On some Ergogen keyboards (e.g. A.Dux) TRS cables short VCC and GND together, there's no fix because the narrow (symmetric) footprint used there already shorts Sleeve and Tip so we only get 2 usable pins on TRS. See issue #15.
QMK uses single-wire duplex serial since Helix so you can use TRS (3-wire stereo cables) and don't need to solder i2c resistors and lose OLED. TRS connectors short together DATA (RX) pad and I2C (floating) pad, but it doesn't affect data transfer.
Note that TRS/TRRS don't support hotplug, there's no safe way to reorder the pins so just power off the keyboard beforehand.
You need different LEDs for different versions (you have to solder ambient LEDs first, they use the same strip):
- Jorne V2.1: all leds are the same SK6812-MINI, you need 56 (12 ambient + 44 per-key).
- Jorne V3: 2 types of LEDs: 12 WS2812B (ambient) + 44 SK6812MINI-E (per-key)
LEDs are chained, order can't be skipped without a jumper wire. Jorne adds LED 28 on the pinky key, LED mapping:
Use 220-230C for soldering or you overheat and kill the LEDs. Educational video:
There are also reverse mount SK6812MINI-E (with E) - they are easier to solder but they won't work on Jorne 2.x. You WILL however need them for Jorne V3 (the version with two non-symmetrical PCBs laid out on a single sheet). Also Jorne V3 needs large planar 2812B LEDs for backlighting.
Jorne V2.1 only. Note reversible PCBs are much cheaper than 2 different PCBs for V3.
- SK6812 3535 BL 3.5mm LEDs, 12 (6 per half) for ambient, 56 for full RGB ($9.74 for 100 pcs)
SK6812MINI pinout is different from WS2812, it's rotated by 90 and pins don't reach the pads in this position. Here's how SK6812MINI looks on a WS2812 footprint (flipped to see the pads):
SK6812MINI-E is much closer to WS2812B than SK6812MINI, the pinout is the same, there's no 90 degree rotation.
Jorne V3-only (version with 2 different PCBs, left and right, laid out on a large sheet).
- SK6812MINI-E Reverse-mount LEDs for switches, need 44 (Jorne V3 only)
You may also use SK68128MINI-E to replace large WS2812s but you'd need a lot of solder because there's about 1 mm gap from the pins to the board (or just bend the legs):
- WS2812B large 5mm LEDs for ambient, need 12 (Jorne V3 only)
Don't overheat top-mount WS2812 if you're using a fan either, or you end up with something like this (it still works, but it doesn't look too well, maybe just use an iron, pins stick out a little bit).
Use brackets on the PCB to determine the LED key position:
Note that old LEDs with a large chip may light up if there's no data so better buy new ones (video):
Upload the selected gerber file, 5 pcs, black mask, default settings for the rest (FR4, 1.6 mm, 1 oz).
- jorne-classic-2.1-gerbers.zip Jorne Classic PCBs (non-hotswap)
Costed $13.15 total for 5 pcs ($4.00 PCB + $4.80 fee + $8.73 shipping - $5 coupon) in late 2019 ($9.88 in early 2019).
- jorne-cherry-2.1-gerbers.zip Jorne Cherry PCBs (hotswap)
Costed $13.96 total for 5 pcs ($4.00 PCB + $4.70 fee + $10.26 shipping - $5 coupon) in late 2019.
- jorne-cherry-3.0-gerbers.zip double sided v3, more expensive
Costs 13.50 + $14.98 for shipping for 5 pcs. Also they ask for extra money: "The order info shows that there is one design, but actually, there are 2 different designs in your file". Note you will need reverse mount MINI-E LEDs for this one (and WS2812B for backlighting).
You may select panel by customer, 2 designs so you will be charged extra $4 automatically without emailing back and forth (Feb 2021):
It's cheaper to order 10 reversible PCBs (2.1) than 5 paired ones (Feb 2021):
5 reversible PCBs cost just $9:
Since Mar 9 2021 they ocassionally want charge extra $6 for "3 designs", depending of the reviewer:
Don't pay them! Say there's one design, and they need to look once more, it usually helps. They can't charge money if there are common connections between segments.
You can also order FR4 top and bottom plates in the same order, it's probably the cheapest way to make a hotswap version (ambient won't be as bright as with acrylic but still shines through the sides).
WARNING. As of 14 May 2020, JLCPCB occasionally fails audit on FR4 top plates ("Hi Sir , please kindly note the space between with slot need 3mm at least , thanks"). They complain about these connections:
Note if you cancel the order you lose the shipping coupons "So sorry to bother you, if the coupon was canceled, we can't refund it".
To fix that, they suggest attaching a note "please process my order with the connection less than 3mm, i will not make the complaint if there are any problem after it finish" in the PCB ordering form before putting it into the basket. I just asked them to proceed by email and it worked but it's better to attach the note beforehand.
You can modify the plate to make plated cutouts for switches using JLCPCB, if you convert them to oval slots.
Plated cutouts are much more durable than exposed FR4 and generally look nicer.
It's been confirmed a few times that it works with JLCPCB. You'd still have to break off the tabs though.
Upd. It doesn't work anymore. They want slots to be 6 mm max, it's 13 mm. They don't even want to charge extra.
Makes aluminum plates for cheap ($1.7 a pcs plus shippping). Read more about aluminum PCBs here: https://www.allpcb.com/pcb/aluminum_substrate.html
New! You can now order aliminum plates on JLCPCB!
It's the very same material keeb.io used in nyquist plates. They are NOT REVERSIBLE so you'd have to order left and right plates separately (they are 1.5mm raw aluminum on one side and 0.1mm dielectric layer with copper and mask on the other side). I only have design files for the FR4 substrate so you'd have to do the aluminum version yourself.
Cuts 3mm black translucent acrylic for cheap (ask techsupport@elecrow.com for a quote).
You can use this form: https://www.elecrow.com/5pcs-acrylic-laser-cutting-service.html (color 502 is opaque black, so add comment about black translucent).
- 5 full sets (tilting-tenting-jorne.ai, 289x198mm) costed $30 + $5.16 shipping (26 Aug 2019)
- 4 half-sets (jorne-simple.dxf, 154x154mm) costed $12.30 + $9.48 shipping (29 Nov 2019)
- Do not hesitate asking by email (techsupport@elecrow.com) you get the best price this way!
WARNING! Don't order OPAQUE black acrylic (color 502), specifically ask for "black translucent".
Quotes tilting-tenting-jorne.ai (3mm clear acrylic) for $14.85 (with free shipping to USA). They have gray translucent acrylic in stock. Shipping outside USA starts from $65, unfortunately.
Cuts 1.5mm carbon, $67 including shipping for 40x50cm sheet. Quoted 2 154x154mm sheets (one Jorne case), 1.5mm carbon fiber for $33.04 total.
40 EUR for steel and 60 EUR for aluminum for 12x35cm sheet (plus 14 EUR shipping)
Cuts anodized aluminum CNC cases. $200 with shipping for the Corne IMK case clone (I don't have design files for anything). Cheaper in bulks (e.g. $800 for 10 orders). Also cuts acrylic, steel, makes injection molding (ask for a quote at info@bestcreating.com).
Used for custom Corne cases by @bizunov. Costed about $200 total. Files are unavailable.
You can also contact foggy from geekhack he runs CNC miling joint prices could be even better.
Makes aluminum anodized CNC, see Ergonaut One model:
It's claimed that it is several times cheaper and better quality than Bestcreating.
Posted here (2 Jan 2024): https://t.me/klavaorgwork/478324 (costed about $130 for 2 upper halves).
Expensive high quality stuff. Untested. Example keyboard: https://t.me/laversa_kbd/599
Makes CNC now. Untested.
If you break extra keys off you get 100% original Corne, then it can use Corne cases from these manufacturers:
- https://www.littlekeyboards.com/collections/corne-cases
- https://keyhive.xyz/corne
- https://shop.beekeeb.com/product-category/case-plate
It's also fully firmware-compatible with the original Crkbd (the extra key is on the thumb row so it doesn't change the matrix).
You can also buy glass screen protectors separately on Keyhive (there are LOTS of them!):
I've forked the tilted case for Crkbd. You may download beta version here (uploaded 2020-12-23):
BTW the thingiverse site is terrible. I heard the site is written in lua. there were some lua error messages. A bit unusual. also heavy caching. I can see updated page as anonymous but not as logged in. Hope they redesign the site soon. You can try https://www.printables.com by Josef Prusa, it's much better but doesn't have much stuff.
Jorne 3d printed case by CaseKraken Store. Aliexpress link:
There are also Jorne plate and backplates by kabbi (February 12, 2021):
plate | backplate |
---|---|
There is also Jorne hi-pro with tenting and m5 holes:
By theoregnier. Available on printables.
I have added the slot for the extra key for Jorne Keyboard from model designed by Coumbaya. Also the tilted version...
There are also good Corne cases that you can use if you break off extra keys, namely:
Tall IMK-like corne case with integrated plate by Lenbok:
Crkbd case with standoffs by hatzelencio:
plate | backplate |
---|---|
The Kunai - Corne Case, Ergonomic Corne case designed to work with acrylic and FR4 Cornes plates by mell0w.
- https://www.printables.com/en/model/317496-the-kunai-corne-case/files (2022-10-18)
- the-kunai-corne-case-model_files.zip (STL files)
There's an also an open source attempt to fix the (severely broken) Kunai:
- https://makerworld.com/en/models/212790 (2024-02-19)
The original model is a great design, thank you for mell0w's design sharing. However, there are many broken surfaces. Some of the broken surfaces, especially the large gap at the top, have been repaired based on the original model.
Chinese case
There's a Kunai-shaped closed source case sold by Xianyu (Taobao second hand market) user @wellxx. If you know where to get a model of that case, let me know. I'm not quite sure what case was first this one or Kunai, because these posts are more recent than the Kunai publishing date.
- https://www.zfrontier.com/app/flow/3aGkP9lbNraL (2023-04-05)
- https://www.zfrontier.com/app/flow/ZbamNnObEWJY (2023-04-05)
- https://www.reddit.com/r/ErgoMechKeyboards/comments/1cbopy2/the_evathemed_split_keyboard/
Nusumu is a new case, made from scratch, with Kunai used as an inspiration. The model is free and the shape and the topology is better than Kunai.
- https://www.printables.com/model/763144-nusumu-corne-keyboard-case
- https://www.reddit.com/r/ErgoMechKeyboards/comments/1ca2arw/nusumu_corne_keyboard_tented_case/
Also I'd like to endorse a few very nice 3d-printed keyboards that use wireless controllers and ZMK, namely:
- https://github.com/Bastardkb/TBK-Mini (wireless: https://redd.it/mkibr1), PCBs are NOT opensouce https://bastardkb.com
- https://github.com/Bastardkb/Skeletyl (there's a tenting base in the V2-tenting-base branch)
- https://github.com/Bastardkb/Dactyl-Manuform-PCB-Plate
What is tilting/tenting (from https://docs.splitkb.com/hc/en-us/articles/360019770320-What-are-tenting-and-tilting-):
I do NOT recommend tiliting/tinting acrylic cases, they are prone to cracking. If you want to try them you'll need more screws:
- M2 and M5 hexagon screws (M5, 2 x 30mm and 2 x 16mm)
- M5 hexagonal anti-loose nuts for tilting/tenting
- Chicago screws (M5x10mm), used as plugs if you're not using tilting/tenting.
3mm acrylic case, M2 countersink screws and 6mm standoffs, tenting made of M5 screws (2x30mm and 2x16mm).
You may use Chicago screws to lay the case flat (screws are M5x10 mm, acrylic case 3 mm):
There are a few solutions aside from tilted/tenting case:
- https://ergodox-ez.com/products/tilt-tent-kit (Ergodox-EZ legs, they cost $45 + shipping for a set of 6)
- https://splitkb.com/products/manfrotto-pocket-tripod (this is essentially a low profile photo tripod). People claim it's rigid.
Video:
- https://splitkb.com/collections/keyboard-parts/products/tenting-puck (tenting pucks for the tripod)
- https://www.amazon.com/Extender-Speakers-amplifiers-Appliance-Bumpers/dp/B07PDJ7T71 (self-adhesive tall bumpers)
These stepless steel phone stands. The manufacturer is called "BSOON", the rest is from German Amazon so it probably won't help you much (assuming you're not in Germany). But it's also available on AliExpress. It's a very sturdy hinge, it holds ipad pro 12.9 without trouble.
Alternatives:
- https://www.aliexpress.com/item/1005003565110509.html (ugly one)
- https://www.aliexpress.com/item/1005002033463732.html (cheap one)
Foldable laptop/keyboard legs, sell on aliexpress for about $8 a 2 pcs set. Haven't tried but they look pretty neat.
Double level ones:
Another ones:
There are much more:
Legs used for the Totem keyboard (tenting version)
- https://github.com/BertPlasschaert/TOTEM-Tenting
- https://github.com/GEIGEIGEIST/TOTEM
- https://youtu.be/rvM2BthjEI4
You can just search for "Universal Laptop Stand Mini" on Aliexpress, they are very cheap (about $1-$2 a piece):
- https://aliexpress.com/item/1005005445341882.html
- https://aliexpress.com/item/1005005861392427.html
- https://aliexpress.com/item/1005006462062888.html
A fancy wrist rest, with its own instagram page. It costs 70 eur a pair:
There are a lot of mouse pads and keyboard pads on Aliexpress that you can use as wrist rests. This one looks interesting but it's only for the right hand:
There's super cool jian-like layout for crkbd by Absolute Watchman, you can use it for the original Corne.
Also see mini layouts for Ferris/A-Dux (34-key):
- https://github.com/manna-harbour/miryoku (36/34-key)
- https://github.com/ChuseCubr/mini-ryoku (34-key)
- https://github.com/aroum/keeper-layouts (34-key) by Watchman
Custom Cherry MX keycaps can be ordered on WASD website:
- http://www.wasdkeyboards.com/index.php/products/keycap-set/104-key-cherry-mx-keycap-set.html
- http://www.cy384.com/projects/atreus-keyboard.html (example design)
Rolio46 keyboard uses custom MBK keycaps (choc profile) with backlighting:
- https://fkcaps.com/custom/FGE2DW (example design)
- https://github.com/MickiusMousius/Rolio46Keyboard (example keyboard)
You can do your own dye-sublimation using dye-sublimation toner and curling flat iron (video):
You can also do laser toner transfer using 3d printer with a laser etching mount:
You can also do black laser toner transfer the same way as you do DIY PCBs, it works just as well.
Click to expand
Always check sizes before cutting (internal cutouts should be 14x14 mm)
Slightly larger 3x3 numpad, see reddit
Look, ma, no cutouts! (By ALLPCB, see https://github.com/joric/jorne/wiki/Free-PCBs)
Cursed 40% jorne-moonlander from @nevenkitasuno (this one is actually pretty cool, I approve)
Твой билд Жорне - билд Жорне от Жорика. (https://goo.gl/maps/G7M4n6TmQcnbDfieA)
Ну что за пиздец! Как на этом в игры играть?
Alice keyboard (Ортопедическая поебень), Geekhack
На этом можно в игры играть!
Silent Hill
Cyberpunk 2077 (Jorne 3D printed case)
Cyberpunk 2077 (MDR XB950BT Hinge - Now Solder Less)
Look how they massacred my boy
Dumang DK6 vs Klavaorg
Ice-cream-stick keyboards (from https://t.me/klavaorgwork/90128)
As seen by Klavaorg
Keyboard meetup in Vancouver, Matias factory
jopian (original keyboard by @vandr0iy)
Manuform c номеронабирателем
Unprofessional! Remove Immediately! (reddit)
Atreus vs thumbs
Corne of the future! (Note the left display isn't even a display, it's a note holder.)
Почему у меня нет друзей (nRFMicro soldering, Клавиатуры и дизайн, Паять просто)
midjourney, нарисуй 40% hhkb (ххкб без цифр)
Почему Ergodox в 2019 - отстой (Video)
https://github.com/pseudoku/ErgoWarp
It's not even my final form! (Reddit)
Anyone tried the ErgoWarp? (Reddit)
Only chavs wear Marks & Spencer jackets https://en.wikipedia.org/wiki/Neil_Bratchpiece
Some infographics on HHKB 2019 classic and hybrid models: Big ass (Deskthority)
Quasimodo vs Esmeralda (Deskthority)
Boomer + zoomer (Deskthority)
Steel plates and other files moved to Archive.
- http://xahlee.info/kbd/corne_jorne_keyboard.html
- https://github.com/BenRoe/awesome-mechanical-keyboard
- https://habr.com/ru/post/526338/
I realized I didn't provide a list of keyboard generators and layout editors, so here they are:
- http://www.keyboard-layout-editor.com - (KLE) Most popular tool, exports to SVG
- http://builder.swillkb.com - plate and case builder
- https://kbfirmware.com - Keyboard Firmware Builder (makes QMK config, helps with handwiring)
- https://ergogen.cache.works - PCB/plate generator, used for as A.Dux and Sweep
Lesser known:
- https://github.com/soundmonster/samoklava PCB generator in github automation scripts
- https://keyboardsimulator.xyz - shows KLE layouts in 3d
- Jorne software wiki: https://github.com/joric/qmk/wiki/jorne
- https://imgur.com/a/T2GXaLw Imgur album (lots of pictures!)
- Official English Corne build guide by Foostan (please read)
- Corne build by pcbgogo, with pictures (could be useful)
- https://yushakobo.jp/shop/a01mc-00/ (spring headers)
- https://www.40percent.club/2016/07/diodes.html
- Corne build manual by temofeev (russian)
- https://kbd.news/The-Japanese-duplex-matrix-1391.html (Japanese duplex matrix, not used, but just in case)
- Гайд по корпусам для разработчиков электроники (FORMLAB 2023, Rus, PDF download form below)
- https://dtf.ru/u/970007-duhovnaya-nishanka/2954764-lyudi-realno-polzuyutsya-takimi-klaviaturami-i-schitayut-chto-vse-normalno