solis-esphome-esp8266.yaml

#
# solis-esphome-esp8266.yaml -- Ginlong Solis Inverter ESPhome definition for ESP8266 MCUs.
#
# (C) 2023-2024 Hajo Noerenberg
#
# Usage:
#   1. Depending on your type of device (INV, ESINV or EPM),
#      include modbus definition in 'packages' section below 
#   2. Compile and upload
#      https://esphome.io/guides/getting_started_command_line.html#first-uploading
#
#
# http://www.noerenberg.de/
# https://github.com/hn/ginlong-solis
#
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 3.0 as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/gpl-3.0.txt>.
#

esphome:
  name: solis-esp8266
  friendly_name: Ginlong Solis Inverter

esp8266:
  board: d1_mini

logger:

packages:
  # Uncomment exactly one line depending on your device type
  #inv:   !include common/solis-modbus-inv.yaml
  #esinv: !include common/solis-modbus-esinv.yaml
  #epm:   !include common/solis-modbus-epm.yaml

  # Uncomment for optional INV inverter addon  
  #inv-acr10r-1ph: !include common/solis-modbus-inv-addon-acr10r-1ph.yaml

time:
  - platform: homeassistant
    id: network_time

api:
  encryption:
    key: !secret api_encryption_key

ota:
  - platform: esphome
    password: !secret ota_password

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  ap:
    ssid: "Ginlong Solis Inverter"
    password: !secret wifi_ap_password

captive_portal:

script:
  - mode: restart
    id: modbus_activity
    then:
      # e.g. blink led

uart:
  id: modbus_uart
  tx_pin: D6
  rx_pin: D5
  baud_rate: 9600

modbus:
  #flow_control_pin: D7
  send_wait_time: 300ms
  id: modbus_hw

modbus_controller:
  - id: modbus_master
    address: 0x1
    modbus_id: modbus_hw
    setup_priority: -10

button:
  - platform: factory_reset
    name: Restart with factory default settings
    id: reset_all
  - platform: restart
    name: Reboot device

sensor:
  - platform: wifi_signal
    name: "WiFi Signal"