Skip to content

Latest commit

 

History

History
190 lines (114 loc) · 5.6 KB

yocto.rst

File metadata and controls

190 lines (114 loc) · 5.6 KB
Raw

Yocto

This section will guide through the integration of Hailo's Yocto layer's into your own Yocto environment.

Two layers are provided by Hailo, the first one is meta-hailo which compiles the HailoRT sources, and the second one is meta-hailo-tappas which compiles the TAPPAS sources.

meta-hailo-tappas is a layer that based un-top of meta-hailo that adds TAPPAS recipes.

The layers are stored in Meta-Hailo Github, with branch for each supported yocto release:

  • Dunfell 3.1 (kernel 5.4.85)
  • Kirkstone 4.0 (kernel 5.15)

Warning

On i.MX8-based devices Kirkstone branch does not support OpenGL, therefore, the Kirkstone applications portfolio is reduced.

Setup

HailoRT

Add the following to your image in your conf/bblayers.conf:

BBLAYERS += " ${BSPDIR}/sources/meta-hailo/meta-hailo-accelerator \
              ${BSPDIR}/sources/meta-hailo/meta-hailo-libhailort"

Add the recipes to your image in your conf/local.conf:

IMAGE_INSTALL_append = "hailo-firmware libhailort hailortcli hailo-pci libgsthailo"

TAPPAS

Add the following to your image in your conf/bblayers.conf:

BBLAYERS += "${BSPDIR}/sources/meta-hailo/meta-hailo-tappas"

Add the following to your image in your conf/local.conf:

IMAGE_INSTALL_append = "libgsthailotools tappas-apps hailo-post-processes tappas-tracers"

Build your image

Run bitbake and build your image. After the build successfully finished, burn the Image to your embedded device.

Note

building on non-IMX devices: To increase the performance of our applications, we patched imx gstreamer-plugins-base. In non-IMX devices you may encounter an error indicating that recipes under meta-hailo-tappas/recipes-multimedia/gstreamer/ cannot be parsed. In this case remove this directory under the meta-hailo-tappas layer, and re-build the image.

rm -rf meta-hailo/meta-hailo-tappas/recipes-multimedia/gstreamer/

Validating the integration's success

Make sure that the following conditions have been met on the target device:

  • Running hailortcli fw-control identify prints the right configurations

  • Running gst-inspect-1.0 | grep hailo returns hailo elements:

    hailo:  hailonet: hailonet element
hailodevicestats: hailodevicestats element

  • Running gst-inspect-1.0 | grep hailotools returns hailotools elements:

    hailotools: hailomuxer: Muxer pipe fitting
hailotools: hailofilter: Hailo postprocessing and drawing element
...

  • post-processes shared object files exists at /usr/lib/hailo-post-processes

Recipes

libgsthailo

Hailo's GStreamer plugin for running inference on the hailo8 chip. Depends on libhailort and GStreamer.

The recipe compiles and copies the libgsthailo.so file to /usr/lib/gstreamer-1.0 on the target device's root file system, make it loadable by GStreamer as a plugin.

libgsthailotools

Hailo's TAPPAS gstreamer elements. Depends on libgsthailo, GStreamer, opencv, xtensor and xtl. The source files located in the TAPPAS release under core/hailo. The recipe compiles with meson and copies the libgsthailotools.so file to /usr/lib/gstreamer-1.0 on the target device's root file system.

tappas-apps

Hailo's TAPPAS embedded application recipe, including GStreamer apps for embedded. The recipe copies the app script, the hef and media files to /home/root/apps/. Depends on GStreamer, opencv, cxxopts, xtensor and xtl.

hailo-post-processes

The recipe compiles and copies the post processes to /usr/lib/hailo-post-processes. Deppends on opencv, xtensor, xtl, rapidjson and cxxopts.

tappas-tracers

Hailo's TAPPAS gstreamer tracers. Depends on libgsthailo and GStreamer. The source files located in the TAPPAS release under core/hailo/tracers. The recipe compiles with meson and copies the libgsthailotracers.so file to /usr/lib/gstreamer-1.0 on the target device's root file system.

For instructions on how to use the tracers on a yocto built machine, see debugging

Troubleshooting

1. The device does not appear on lspci

If the device does not appear after running lspci, there may be two possible reasons:

  • Symptom:

    The device is not connected correctly

  • Symptom:

    The u-boot device tree does not support pcie.

    Solution:

    To fix this, replace the ftd_file you are using on u-boot.

    setenv fdt_file imx6q-sabresd-pcie.dtb

2. HDMI port is connected but there is no display

Symptom:

On some imx devices you need to manually configure the u-boot to show video using HDMI port.

Solution:

To fix this issue you should set the u-boot to use HDMI port, defining the resolution, FPS and output format. The configuration is "added" (do not override this) to the mmcargs:

For example on IMX6Q-Sabresd, this the default value of mmargs:

mmcargs="setenv bootargs console=${console},${baudrate} ${smp} root=${mmcroot}"

Using this command we add the needed info to this variable:

setenv mmcargs "setenv bootargs console=${console},${baudrate} ${smp} root=${mmcroot} video=mxcfb0:dev=hdmi,1280x720M@30,if=RGB24"