[BUG REPORT] The Installation fails #234
Comments
|
Can you run activate_only.bat, then run the command The cause for the error could be a corrupt torch wheel in |
Hey, thanks a lot for a quick reply. Honestly I'm really new to this and I barely know what's going on. I did like you've said and clicked activate.bat, then I run the command inside: I've got a bunch of messages that requirements are already satisfied but in the end the successful installation message: Apologies if that's a stupid question, but where do you add the line --no-cache-dir ? After running the command in activate.bat you've showed me the installation still failed displaying the message: I found the same error on the issue report here: AUTOMATIC1111/stable-diffusion-webui#13659 Whatever that is, it installed successfuly. Not sure if I did that right, but I've opened cmd inside the main audio-webui folder and run those two commands inside. After installation of those pip clip things, and running run.bat it still did not work, I received a similar message to the first one I've posted here but with Exit code:1 instead of Exit code:2, posting the full message: |
If you ran As for audiocraft, I'm not really sure |
|
Sadly I still get the same error with the same error code after running: |
Describe the bug
I can't complete the installation of UI by running run.bat, it always fails.
To Reproduce
Steps to reproduce the behavior:
Expected behavior
Intallation fails each time and you can not run audio-ui
Screenshots
Checking installs and venv + autodebug checks
Python version: 3.10.6 (tags/v3.10.6:9c7b4bd, Aug 1 2022, 21:53:49) [MSC v.1932 64 bit (AMD64)]
Webui version: 17c7489 - Wed May 29 16:37:24 2024 +0200
Found extensions:
activating venv
no venv found, creating venv
Checking installs and venv + autodebug checks
Python version: 3.10.6 (tags/v3.10.6:9c7b4bd, Aug 1 2022, 21:53:49) [MSC v.1932 64 bit (AMD64)]
Webui version: 17c7489 - Wed May 29 16:37:24 2024 +0200
Found extensions:
Installed packaging!
Installed wheel!
Installed numpy!
Failed to install PyTorch. Check AutoDebug output.
Install failed!
STDOUT:
Looking in indexes: https://pypi.org/simple, https://download.pytorch.org/whl/cu118
Collecting torch==2.1.0
Downloading https://download.pytorch.org/whl/cu118/torch-2.1.0%2Bcu118-cp310-cp310-win_amd64.whl (2722.7 MB)
---------------------------------------- 2.7/2.7 GB 579.5 kB/s eta 0:00:00
Collecting torchvision==0.16.0
Downloading https://download.pytorch.org/whl/cu118/torchvision-0.16.0%2Bcu118-cp310-cp310-win_amd64.whl (5.0 MB)
---------------------------------------- 5.0/5.0 MB 22.9 MB/s eta 0:00:00
Collecting torchaudio==2.1.0
Downloading https://download.pytorch.org/whl/cu118/torchaudio-2.1.0%2Bcu118-cp310-cp310-win_amd64.whl (3.9 MB)
---------------------------------------- 3.9/3.9 MB 62.0 MB/s eta 0:00:00
Collecting networkx
Downloading networkx-3.3-py3-none-any.whl (1.7 MB)
---------------------------------------- 1.7/1.7 MB 3.9 MB/s eta 0:00:00
Collecting fsspec
Using cached fsspec-2024.6.1-py3-none-any.whl (177 kB)
Collecting typing-extensions
Using cached typing_extensions-4.12.2-py3-none-any.whl (37 kB)
Collecting jinja2
Using cached jinja2-3.1.4-py3-none-any.whl (133 kB)
Collecting sympy
Using cached sympy-1.12.1-py3-none-any.whl (5.7 MB)
Collecting filelock
Using cached filelock-3.15.4-py3-none-any.whl (16 kB)
Collecting pillow!=8.3.*,>=5.3.0
Using cached pillow-10.4.0-cp310-cp310-win_amd64.whl (2.6 MB)
Collecting requests
Using cached requests-2.32.3-py3-none-any.whl (64 kB)
Requirement already satisfied: numpy in e:\ai15\aivoice!audio webui\audio-webui\venv\lib\site-packages (from torchvision==0.16.0) (1.23.5)
Collecting MarkupSafe>=2.0
Using cached https://download.pytorch.org/whl/MarkupSafe-2.1.5-cp310-cp310-win_amd64.whl (17 kB)
Collecting charset-normalizer<4,>=2
Using cached charset_normalizer-3.3.2-cp310-cp310-win_amd64.whl (100 kB)
Collecting urllib3<3,>=1.21.1
Using cached urllib3-2.2.2-py3-none-any.whl (121 kB)
Collecting idna<4,>=2.5
Using cached idna-3.7-py3-none-any.whl (66 kB)
Collecting certifi>=2017.4.17
Downloading certifi-2024.7.4-py3-none-any.whl (162 kB)
---------------------------------------- 163.0/163.0 kB ? eta 0:00:00
Collecting mpmath<1.4.0,>=1.1.0
Using cached https://download.pytorch.org/whl/mpmath-1.3.0-py3-none-any.whl (536 kB)
Installing collected packages: mpmath, urllib3, typing-extensions, sympy, pillow, networkx, MarkupSafe, idna, fsspec, filelock, charset-normalizer, certifi, requests, jinja2, torch, torchvision, torchaudio
STDERR:
ERROR: Exception:
Traceback (most recent call last):
File "E:\AI15\AIVOICE!audio webui\audio-webui\venv\lib\site-packages\pip_internal\cli\base_command.py", line 167, in exc_logging_wrapper
status = run_func(*args)
File "E:\AI15\AIVOICE!audio webui\audio-webui\venv\lib\site-packages\pip_internal\cli\req_command.py", line 247, in wrapper
return func(self, options, args)
File "E:\AI15\AIVOICE!audio webui\audio-webui\venv\lib\site-packages\pip_internal\commands\install.py", line 461, in run
installed = install_given_reqs(
File "E:\AI15\AIVOICE!audio webui\audio-webui\venv\lib\site-packages\pip_internal\req_init_.py", line 73, in install_given_reqs
requirement.install(
File "E:\AI15\AIVOICE!audio webui\audio-webui\venv\lib\site-packages\pip_internal\req\req_install.py", line 790, in install
install_wheel(
File "E:\AI15\AIVOICE!audio webui\audio-webui\venv\lib\site-packages\pip_internal\operations\install\wheel.py", line 727, in install_wheel
_install_wheel(
File "E:\AI15\AIVOICE!audio webui\audio-webui\venv\lib\site-packages\pip_internal\operations\install\wheel.py", line 587, in _install_wheel
file.save()
File "E:\AI15\AIVOICE!audio webui\audio-webui\venv\lib\site-packages\pip_internal\operations\install\wheel.py", line 386, in save
with self._zip_file.open(zipinfo) as f:
File "C:\Users\Dibak\AppData\Local\Programs\Python\Python310\lib\zipfile.py", line 1556, in open
raise BadZipFile(
zipfile.BadZipFile: File name in directory (1980, 1, 1, 0, 0, 0) and header b'torch/include/ATen/ops/_prelu_kernel_cuda_dispatch.h' differ.
[notice] A new release of pip available: 22.2.1 -> 24.1.1
[notice] To update, run: python.exe -m pip install --upgrade pip
Please read the error above carefully.
If you are unsure, please create an issue at https://github.com/gitmylo/audio-webui/issues.
When creating an issue, please include your full autodebug message.
Exit code: 2
Additional context
The text was updated successfully, but these errors were encountered: