Replies: 2 comments 2 replies
-
Since L2 switches in AVD are always using port-channels, we have chosen to implement inband ZTP support using LACP fallback individual. Let us know if it works out or if you have more questions. Thanks |
Beta Was this translation helpful? Give feedback.
-
Hi, thanks for your answer. So with the port-channel configuration it is not possible to use the lldp ztp vlan feature directly on the port? Correct? And how do I verify that die lacp fallback individual is configured correctly? Which commands show be found in the rendered cli config for the l3leaf and l2leaf switch? Best regards |
Beta Was this translation helpful? Give feedback.
-
Hi there,
I want to use the ztp feature to tell a 710P, which has no mgmt interface, to contact CVP to get a inital config to be deployed via AVD. There is a guide how to enable ztp via lldp on the l3leaf switch, which is the uplink switch for the 710P L2 leaf.(https://www.arista.com/en/support/toi/eos-4-27-1f/14879-campus-ztp-through-vlan-advertised-from-spine-aggregation-switch)
Is there a way to define via AVD on the downlink port of the l3leaf the lldp ztp vlan for the layer2 switch?
Best regards
Stefan
Beta Was this translation helpful? Give feedback.
All reactions