test3dprint

substitutions:
  plug_name: esp-test3dprint

esphome:
  name: ${plug_name}
  platform: ESP8266
  board: nodemcuv2

wifi:
  ssid: name ssid
  password: pass_ssid

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Esp test3dprint Fallback Hotspot"
    password: 

captive_portal:
# Enable logging
logger:
# Enable Home Assistant API
api:
  password: 
ota:
  password: 


# Example configuration entry for ESP32
i2c:
  sda: GPIO4
  scl: GPIO5
  scan: True
#  id: bus_a

# Example configuration entry
spi:
  miso_pin: D6
  clk_pin: D5


switch:
 
# restart esp
  - platform: restart
    id: restart_controller
    name: "esp-test3dprint Restart"  

sensor:
  - platform: hx711
    name: "Tenzo HX711 Value"
    dout_pin: D3
    clk_pin: D4
    gain: 128
    update_interval: 1s
    filters:
      - calibrate_linear:
          - -26690 -> 0
          - -280090 -> 1000
    unit_of_measurement: g    
   
    

  - platform: max6675
    name: "Thermocouple Temperature"
    cs_pin: D8
    update_interval: 1s

  - platform: mpu6050
    address: 0x68
    accel_x:
      name: "Accel X"
    accel_y:
      name: "Accel Y"
    accel_z:
      name: "Accel z"
    gyro_x:
      name: "Gyro X"
    gyro_y:
      name: "Gyro Y"
    gyro_z:
      name: "Gyro z"
    temperature:
      name: "MPU6050 Temperature"
    update_interval: 0.1s
    


  - platform: uptime
    id: device_uptime
#    internal: true

  - platform: wifi_signal
    name: "${plug_name} WiFi"
    update_interval: 15s
    
text_sensor:
  - platform: template
    name: "${plug_name} uptime"
    lambda: |-
      uint32_t uptime = (id(device_uptime).state);
      int minutes = (uptime % 3600) / 60;
      int hours = (uptime % 86400) / 3600;
      int days = uptime / 86400;
      if (days > 0) {
        return { (String(days) + " д." + String(hours) + " ч." + String(minutes) + " мин.").c_str() };
      }
      if (hours > 0) {
        return { (String(hours) + " ч. " + String(minutes) + " мин.").c_str() };
      } else {
        return { (String(minutes) + " мин.").c_str() };
      }
    update_interval: 60s
    icon: mdi:clock-start