You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I have been using SGP41 sensors in combination with SHT41 for two or three years now. It works really well with a raspberry pi zero 2 with the algorithm provided by Sensirion. However, the self-heating is quite significant and I would like to use them in a "low power" mode. Such an algorithm seems to be provided for the SGP40 (VOC) but I can't find one for the SGP41 (VOC and NOx). Is there one and, if so, where can I find it? Thanks, Jerome CANDAU
The text was updated successfully, but these errors were encountered:
Hello Jerome,
Unfortunately the NOx measurement requires a conditioning period (10 seconds recommended), during which the sensor's hotplate come to a stable temperature hence allowing faster measurements.
As you might guess, it makes a low power mode irrelevant (sampling rate 1s or 10s).
I have been using SGP41 sensors in combination with SHT41 for two or three years now. It works really well with a raspberry pi zero 2 with the algorithm provided by Sensirion. However, the self-heating is quite significant and I would like to use them in a "low power" mode. Such an algorithm seems to be provided for the SGP40 (VOC) but I can't find one for the SGP41 (VOC and NOx). Is there one and, if so, where can I find it? Thanks, Jerome CANDAU
The text was updated successfully, but these errors were encountered: