[Device type, vendor, and model name]

[fah105]

MPP solar blueprint/grafana adjustment***********
I just updated my 6 UCMs with the new MPP Solar blueprint and it looks good - thanks!
I would however very much like to suggest a few modifications in grafana if possible:

1. The "AC output active power" is constantly 5kW, so there is something wrong there.

2. The "Output Mode" graph does not really make sense to have in my opinion. It should at least not be a part of the graphs.

3. It would be very nice if its possible to merge the "Battery Discharge Current" graph with the "Battery Charge Current" to get one single graph (i.e. BCC-BDC=Battery current)? In this way the graph could go negative if the battery is being charged and positive if it is discharging.)

4. I would also like to have the metrics graphs moved a bit around in Grafana so the most interesting parameters are shown first.
   The priority should in my opinion be:
   a. PV power
   b. PV voltage
   c. PV current (PV power divided by PV voltage)
   d. Battery voltage
   e. Battery charging current
   f. Battery capacity (SoC)
   g. AC Output active power
   h. AC Output load percent
   i. AC Output voltage
   j. AC output frequency
   k. Grid voltage
   l. Grid frequency

I know its a lot of things, but it would help me a lot.
Thanks!