system_defines.vh

/*!
 * @file system_defines.vh
 * @date 2015-02-28  
 * @author Andrey Filippov     
 *
 * @brief Preprocessor macros definitions to be included in AHCI SATA project
 * files when built as a stanalone project (https://github.com/Elphel/x393_sata).
 * Not used when AHCI SATA is a part of the x393 project.
 *
 * @copyright Copyright (c) 2015 Elphel, Inc.
 *
 * <b>License:</b>
 *
 * system_defines.vh is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * system_defines.vh is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/> .
 *
 * Additional permission under GNU GPL version 3 section 7:
 * If you modify this Program, or any covered work, by linking or combining it
 * with independent modules provided by the FPGA vendor only (this permission
 * does not extend to any 3-rd party modules, "soft cores" or macros) under
 * different license terms solely for the purpose of generating binary "bitstream"
 * files and/or simulating the code, the copyright holders of this Program give
 * you the right to distribute the covered work without those independent modules
 * as long as the source code for them is available from the FPGA vendor free of
 * charge, and there is no dependence on any encrypted modules for simulating of
 * the combined code. This permission applies to you if the distributed code
 * contains all the components and scripts required to completely simulate it
 * with at least one of the Free Software programs.
 */
  // This file may be used to define same pre-processor macros to be included into each parsed file
`ifndef SYSTEM_DEFINES
  `define SYSTEM_DEFINES
  `define USE_DRP
  `define ALIGN_CLOCKS
//  `define STRAIGHT_XCLK
  `define USE_DATASCOPE
//  `define DATASCOPE_INCOMING_RAW
  `define PRELOAD_BRAMS
//  `define AHCI_SATA 1
//  `define DEBUG_ELASTIC  
// Enviroment-dependent options
  `ifdef IVERILOG
    `define SIMULATION
    `define OPEN_SOURCE_ONLY
    `define CHECKERS_ENABLED 1    
  `else
    `ifdef CVC
      `define SIMULATION
      `define OPEN_SOURCE_ONLY
      `define CHECKERS_ENABLED 1    
    `else
       `undef OPEN_SOURCE_ONLY
    `endif // CVC
    
  `endif // IVERILOG
  
// will not use simultaneous reset in shift registers, just and input data with ~rst  
 `define SHREG_SEQUENTIAL_RESET 1
// synthesis does to recognize global clock as G input of the primitive latch 
 `undef INFER_LATCHES
 // define when using CDC - it does not support them
 `undef IGNORE_ATTR
//`define MEMBRIDGE_DEBUG_READ 1
  `define use200Mhz 1
  `define USE_CMD_ENCOD_TILED_32_RD 1  
  // It can be used to check different `ifdef branches
  //`define XIL_TIMING //Simprim 
  `define den4096Mb 1
//  `define IVERILOG
  // defines for memory channels
  // chn 0 is read from memory and write to memory
 `define def_enable_mem_chn0
 `define def_read_mem_chn0
 `define def_write_mem_chn0
 `undef  def_scanline_chn0
 `undef  def_tiled_chn0
 
  // chn 1 is scanline r+w
 `define  def_enable_mem_chn1
 `define  def_read_mem_chn1
 `define  def_write_mem_chn1
 `define  def_scanline_chn1
 `undef   def_tiled_chn1

  // chn 2 is tiled r+w
 `define  def_enable_mem_chn2
 `define  def_read_mem_chn2
 `define  def_write_mem_chn2
 `undef   def_scanline_chn2
 `define  def_tiled_chn2

  // chn 3 is scanline r+w (reuse later)
 `define  def_enable_mem_chn3
 `define  def_read_mem_chn3
 `define  def_write_mem_chn3
 `define  def_scanline_chn3
 `undef   def_tiled_chn3

  // chn 4 is tiled r+w (reuse later)
 `define  def_enable_mem_chn4
 `define  def_read_mem_chn4
 `define  def_write_mem_chn4
 `undef   def_scanline_chn4
 `define  def_tiled_chn4

  // chn 5 is disabled
 `undef def_enable_mem_chn5

  // chn 6 is disabled
 `undef  def_enable_mem_chn6
 
  // chn 7 is disabled
 `undef  def_enable_mem_chn7
 
  // chn 8 is scanline w (sensor channel 0)
 `define  def_enable_mem_chn8
 `undef   def_read_mem_chn8
 `define  def_write_mem_chn8
 `define  def_scanline_chn8
 `undef   def_tiled_chn8

  // chn 9 is scanline w (sensor channel 1)
 `define  def_enable_mem_chn9
 `undef   def_read_mem_chn9
 `define  def_write_mem_chn9
 `define  def_scanline_chn9
 `undef   def_tiled_chn9

  // chn 10 is scanline w (sensor channel 2)
 `define  def_enable_mem_chn10
 `undef   def_read_mem_chn10
 `define  def_write_mem_chn10
 `define  def_scanline_chn10
 `undef   def_tiled_chn10

  // chn 11 is scanline w (sensor channel 3)
 `define  def_enable_mem_chn11
 `undef   def_read_mem_chn11
 `define  def_write_mem_chn11
 `define  def_scanline_chn11
 `undef   def_tiled_chn11

  // chn 12 is tiled read (compressor channel 0)
 `define  def_enable_mem_chn12
 `define  def_read_mem_chn12
 `undef   def_write_mem_chn12
 `undef   def_scanline_chn12
 `define  def_tiled_chn12
 
  // chn 12 is tiled read (compressor channel 1)
 `define  def_enable_mem_chn13
 `define  def_read_mem_chn13
 `undef   def_write_mem_chn13
 `undef   def_scanline_chn13
 `define  def_tiled_chn13
 
  // chn 12 is tiled read (compressor channel 2)
 `define  def_enable_mem_chn14
 `define  def_read_mem_chn14
 `undef   def_write_mem_chn14
 `undef   def_scanline_chn14
 `define  def_tiled_chn14
 
  // chn 12 is tiled read (compressor channel 3)
 `define  def_enable_mem_chn15
 `define  def_read_mem_chn15
 `undef   def_write_mem_chn15
 `undef   def_scanline_chn15
 `define  def_tiled_chn15
`endif