diff --git a/pyproject.toml b/pyproject.toml
index ec3f33254..5a10a8eaf 100644
--- a/pyproject.toml
+++ b/pyproject.toml
@@ -25,7 +25,7 @@ dependencies = [
     "matplotlib",
     "nexgen",
     "numpy",
-    "opencv-python-headless",
+    "opencv-python",               # Needed for I24 ssx moveonclick. To be changed to headless once this is moved to separate ui. 
     "opentelemetry-distro",
     "opentelemetry-exporter-otlp",
     "pydantic",
diff --git a/src/mx_bluesky/beamlines/i24/serial/extruder/EX-gui-edm/DetStage.edl b/src/mx_bluesky/beamlines/i24/serial/extruder/EX-gui-edm/DetStage.edl
index 8316b06fb..daa5cd187 100644
--- a/src/mx_bluesky/beamlines/i24/serial/extruder/EX-gui-edm/DetStage.edl
+++ b/src/mx_bluesky/beamlines/i24/serial/extruder/EX-gui-edm/DetStage.edl
@@ -3,8 +3,8 @@ beginScreenProperties
 major 4
 minor 0
 release 1
-x 3338
-y 572
+x 1316
+y 573
 w 450
 h 180
 font "arial-medium-r-18.0"
@@ -113,7 +113,7 @@ font "arial-medium-r-18.0"
 buttonLabel "Move Stage"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run setup_detector_stage '\{\"expt_type\":\"Serial Jet\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run setup_detector_stage '\{\"expt_type\":\"Serial Jet\",\"detector_stage\":\"detector_motion\"\}'"
 }
 endObjectProperties
 
diff --git a/src/mx_bluesky/beamlines/i24/serial/extruder/EX-gui-edm/DiamondExtruder-I24-py3v1.edl b/src/mx_bluesky/beamlines/i24/serial/extruder/EX-gui-edm/DiamondExtruder-I24-py3v1.edl
index 66bbc64c5..d770a0585 100644
--- a/src/mx_bluesky/beamlines/i24/serial/extruder/EX-gui-edm/DiamondExtruder-I24-py3v1.edl
+++ b/src/mx_bluesky/beamlines/i24/serial/extruder/EX-gui-edm/DiamondExtruder-I24-py3v1.edl
@@ -3,8 +3,8 @@ beginScreenProperties
 major 4
 minor 0
 release 1
-x 1018
-y 277
+x 1006
+y 192
 w 700
 h 900
 font "arial-medium-r-18.0"
@@ -370,7 +370,7 @@ font "arial-medium-r-24.0"
 buttonLabel "Start"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run run_extruder_plan"
+  0 "blueapi -c CONFIG_LOCATION controller run run_extruder_plan '\{\"zebra\":\"zebra\",\"aperture\":\"aperture\",\"backlight\":\"backlight\",\"beamstop\":\"beamstop\",\"detector_stage\":\"detector_motion\",\"shutter\":\"shutter\",\"dcm\":\"dcm\"\}'"
 }
 endObjectProperties
 
@@ -832,7 +832,7 @@ botShadowColor index 11
 font "arial-medium-r-18.0"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run initialise_extruder"
+  0 "blueapi -c CONFIG_LOCATION controller run initialise_extruder '\{\"detector_stage\":\"detector_motion\"\}'"
 }
 endObjectProperties
 
@@ -2179,7 +2179,7 @@ font "arial-medium-r-20.0"
 buttonLabel "Laser On"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run laser_check '\{\"mode\":\"laseron\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run laser_check '\{\"mode\":\"laseron\",\"zebra\":\"zebra\",\"detector_stage\":\"detector_motion\"\}'"
 }
 endObjectProperties
 
@@ -2201,7 +2201,7 @@ font "arial-medium-r-20.0"
 buttonLabel "Laser Off"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run laser_check '\{\"mode\":\"laseroff\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run laser_check '\{\"mode\":\"laseroff\",\"zebra\":\"zebra\",\"detector_stage\":\"detector_motion\"\}'"
 }
 endObjectProperties
 
@@ -2223,7 +2223,7 @@ font "arial-medium-r-18.0"
 buttonLabel "Enter hutch"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run enter_hutch"
+  0 "blueapi -c CONFIG_LOCATION controller run enter_hutch '\{\"detector_stage\":\"detector_motion\"\}'"
 }
 endObjectProperties
 
diff --git a/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/CustomChip_py3v1.edl b/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/CustomChip_py3v1.edl
index 8f673dc80..56ee0a60a 100644
--- a/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/CustomChip_py3v1.edl
+++ b/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/CustomChip_py3v1.edl
@@ -3,8 +3,8 @@ beginScreenProperties
 major 4
 minor 0
 release 1
-x 1202
-y 1158
+x 1203
+y 544
 w 550
 h 380
 font "arial-medium-r-18.0"
@@ -690,7 +690,7 @@ botShadowColor index 11
 font "arial-medium-r-18.0"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run cs_reset"
+  0 "blueapi -c CONFIG_LOCATION controller run cs_reset '\{\"pmac\":\"pmac\"\}'"
 }
 endObjectProperties
 
diff --git a/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/DetStage.edl b/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/DetStage.edl
index da3abf7e9..9c47efbaf 100644
--- a/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/DetStage.edl
+++ b/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/DetStage.edl
@@ -3,8 +3,8 @@ beginScreenProperties
 major 4
 minor 0
 release 1
-x 1943
-y 793
+x 1205
+y 579
 w 450
 h 180
 font "arial-medium-r-18.0"
@@ -113,7 +113,7 @@ font "arial-medium-r-18.0"
 buttonLabel "Move Stage"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run setup_detector_stage '\{\"expt_type\":\"Serial Fixed\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run setup_detector_stage '\{\"expt_type\":\"Serial Fixed\",\"detector_stage\":\"detector_motion\"\}'"
 }
 endObjectProperties
 
diff --git a/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/DiamondChipI24-py3v1.edl b/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/DiamondChipI24-py3v1.edl
index d2f8d71f4..53082e9f7 100644
--- a/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/DiamondChipI24-py3v1.edl
+++ b/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/DiamondChipI24-py3v1.edl
@@ -3,8 +3,8 @@ beginScreenProperties
 major 4
 minor 0
 release 1
-x 2870
-y 282
+x 844
+y 238
 w 1030
 h 950
 font "arial-medium-r-18.0"
@@ -280,7 +280,7 @@ botShadowColor index 14
 font "arial-medium-r-18.0"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run moveto_preset '\{\"place\":\"load_position\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run moveto_preset '\{\"place\":\"load_position\",\"pmac\":\"pmac\",\"beamstop\":\"beamstop\",\"backlight\":\"backlight\",\"det_stage\":\"detector_motion\"\}'"
 }
 endObjectProperties
 
@@ -301,7 +301,7 @@ botShadowColor index 14
 font "arial-medium-r-18.0"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run moveto_preset '\{\"place\":\"collect_position\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run moveto_preset '\{\"place\":\"collect_position\",\"pmac\":\"pmac\",\"beamstop\":\"beamstop\",\"backlight\":\"backlight\",\"det_stage\":\"detector_motion\"\}'"
 }
 endObjectProperties
 
@@ -323,7 +323,7 @@ font "helvetica-bold-r-24.0"
 buttonLabel "Start"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run run_fixed_target_plan"
+  0 "blueapi -c CONFIG_LOCATION controller run run_fixed_target_plan '\{\"zebra\":\"zebra\",\"pmac\":\"pmac\",\"aperture\":\"aperture\",\"backlight\":\"backlight\",\"beamstop\":\"beamstop\",\"detector_stage\":\"detector_motion\",\"shutter\":\"shutter\",\"dcm\":\"dcm\"\}'"
 }
 endObjectProperties
 
@@ -615,7 +615,7 @@ botShadowColor index 14
 font "arial-medium-r-18.0"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run cs_maker"
+  0 "blueapi -c CONFIG_LOCATION controller run cs_maker '\{\"pmac\":\"pmac\"\}'"
 }
 endObjectProperties
 
@@ -1157,7 +1157,7 @@ botShadowColor index 14
 font "arial-medium-r-18.0"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run initialise_stages"
+  0 "blueapi -c CONFIG_LOCATION controller run initialise_stages '\{\"pmac\":\"pmac\"\}'"
 }
 endObjectProperties
 
@@ -1541,7 +1541,7 @@ botShadowColor index 14
 font "arial-medium-r-18.0"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run block_check"
+  0 "blueapi -c CONFIG_LOCATION controller run block_check '\{\"pmac\":\"pmac\"\}'"
 }
 endObjectProperties
 
@@ -2915,7 +2915,7 @@ font "helvetica-medium-r-18.0"
 buttonLabel "Set Fiducial 2"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run fiducial '\{\"point\":\"2\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run fiducial '\{\"point\":\"2\",\"pmac\":\"pmac\"\}'"
 }
 endObjectProperties
 
@@ -2937,7 +2937,7 @@ font "helvetica-medium-r-18.0"
 buttonLabel "Goto Fiducial 2"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run moveto '\{\"place\":\"f2\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run moveto '\{\"place\":\"f2\",\"pmac\":\"pmac\"\}'"
 }
 endObjectProperties
 
@@ -2981,7 +2981,7 @@ font "helvetica-medium-r-18.0"
 buttonLabel "Set Fiducial 1"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run fiducial '\{\"point\":\"1\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run fiducial '\{\"point\":\"1\",\"pmac\":\"pmac\"\}'"
 }
 endObjectProperties
 
@@ -3003,7 +3003,7 @@ font "helvetica-medium-r-18.0"
 buttonLabel "Goto Fiducial 1"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run moveto '\{\"place\":\"f1\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run moveto '\{\"place\":\"f1\",\"pmac\":\"pmac\"\}'"
 }
 endObjectProperties
 
@@ -3734,7 +3734,7 @@ botShadowColor index 14
 font "arial-medium-r-18.0"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run moveto '\{\"place\":\"zero\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run moveto '\{\"place\":\"zero\",\"pmac\":\"pmac\"\}'"
 }
 endObjectProperties
 
@@ -3776,7 +3776,7 @@ botShadowColor index 14
 font "arial-medium-r-18.0"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run moveto_preset '\{\"place\":\"microdrop_position\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run moveto_preset '\{\"place\":\"microdrop_position\",\"pmac\":\"pmac\",\"beamstop\":\"beamstop\",\"backlight\":\"backlight\",\"det_stage\":\"detector_motion\"\}'"
 }
 endObjectProperties
 
diff --git a/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/MappingLite-oxford_py3v1.edl b/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/MappingLite-oxford_py3v1.edl
index bf510f9ad..ff7812f6b 100644
--- a/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/MappingLite-oxford_py3v1.edl
+++ b/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/MappingLite-oxford_py3v1.edl
@@ -3,8 +3,8 @@ beginScreenProperties
 major 4
 minor 0
 release 1
-x 3168
-y 155
+x 1062
+y 369
 w 650
 h 400
 font "arial-medium-r-18.0"
@@ -219,7 +219,7 @@ font "arial-medium-r-18.0"
 buttonLabel "Upload Parameters"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run upload_parameters"
+  0 "blueapi -c CONFIG_LOCATION controller run upload_parameters '\{\"pmac\":\"pmac\"\}'"
 }
 endObjectProperties
 
@@ -2410,7 +2410,7 @@ font "helvetica-medium-r-18.0"
 buttonLabel "Define Chip In PMAC"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run define_current_chip '\{\"chipid\":\"oxford\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run define_current_chip '\{\"chipid\":\"oxford\",\"pmac\":\"pmac\"\}'"
 }
 endObjectProperties
 
diff --git a/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/pumpprobe-py3v1.edl b/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/pumpprobe-py3v1.edl
index 0383988c7..7fe1d94fc 100644
--- a/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/pumpprobe-py3v1.edl
+++ b/src/mx_bluesky/beamlines/i24/serial/fixed_target/FT-gui-edm/pumpprobe-py3v1.edl
@@ -3,8 +3,8 @@ beginScreenProperties
 major 4
 minor 0
 release 1
-x 2970
-y 362
+x 830
+y 200
 w 900
 h 700
 font "arial-medium-r-18.0"
@@ -707,7 +707,7 @@ botShadowColor index 14
 font "arial-medium-r-18.0"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run laser_control '\{\"laser_setting\":\"laser1off\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run laser_control '\{\"laser_setting\":\"laser1off\",\"pmac\":\"pmac\"\}'"
 }
 endObjectProperties
 
@@ -749,7 +749,7 @@ botShadowColor index 14
 font "arial-medium-r-18.0"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run laser_control '\{\"laser_setting\":\"laser1on\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run laser_control '\{\"laser_setting\":\"laser1on\",\"pmac\":\"pmac\"\}'"
 }
 endObjectProperties
 
@@ -976,7 +976,7 @@ botShadowColor index 14
 font "arial-medium-r-18.0"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run laser_control '\{\"laser_setting\":\"laser2off\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run laser_control '\{\"laser_setting\":\"laser2off\",\"pmac\":\"pmac\"\}'"
 }
 endObjectProperties
 
@@ -1018,7 +1018,7 @@ botShadowColor index 14
 font "arial-medium-r-18.0"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run laser_control '\{\"laser_setting\":\"laser2on\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run laser_control '\{\"laser_setting\":\"laser2on\",\"pmac\":\"pmac\"\}'"
 }
 endObjectProperties
 
@@ -1334,7 +1334,7 @@ botShadowColor index 14
 font "arial-medium-r-18.0"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run laser_control '\{\"laser_setting\":\"laser1burn\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run laser_control '\{\"laser_setting\":\"laser1burn\",\"pmac\":\"pmac\"\}'"
 }
 endObjectProperties
 
@@ -1376,7 +1376,7 @@ botShadowColor index 14
 font "arial-medium-r-18.0"
 numCmds 1
 command {
-  0 "blueapi -c CONFIG_LOCATION controller run laser_control '\{\"laser_setting\":\"laser2burn\"\}'"
+  0 "blueapi -c CONFIG_LOCATION controller run laser_control '\{\"laser_setting\":\"laser2burn\",\"pmac\":\"pmac\"\}'"
 }
 endObjectProperties
 
diff --git a/src/mx_bluesky/beamlines/i24/serial/run_serial.py b/src/mx_bluesky/beamlines/i24/serial/run_serial.py
index 55e7f37a4..5678ec0d7 100644
--- a/src/mx_bluesky/beamlines/i24/serial/run_serial.py
+++ b/src/mx_bluesky/beamlines/i24/serial/run_serial.py
@@ -11,7 +11,7 @@ def get_location(default: str = "dev") -> str:
 
 
 def get_edm_path() -> Path:
-    return Path(__file__).parents[4] / "edm_serial"
+    return Path(__file__).parents[5] / "edm_serial"
 
 
 def _get_file_path() -> Path: