Standadone communication driver for the AHT20 Temperature & Humidity sensor, running on a Raspberry Pi on Python.
The AHT20 sensor is connected to the Rasperry Pi via the following pins:
| Pin # | Pin Name | Connection |
|---|---|---|
| 1 | 3.3v | Voltage in |
| 3 | GPIO2 | I2C SDA |
| 5 | GPIO3 | I2C SDL |
| 9 | GND | Ground |
The Raspberry Pi GPIO pinout map can be viewed here.
- Raspberry Pi, but could run elsewhere
- On the machine:
python3-smbusinstalled - On Python:
smbus2installed
- The I2C bus is
1by default, as it's the default one for the Raspberry Pi. Another bus can be specified with theBusNumvariable when calling the module.
- Chouffy for the original module
- Zifeng1997 for the CRC8 checker