diff --git a/CHANGES.md b/CHANGES.md
index 72d96b8..57c5ada 100755
--- a/CHANGES.md
+++ b/CHANGES.md
@@ -1,7 +1,8 @@
-### 2.0.0-BETA1 ###
+### 2.0.0 ###
 * Added: `reset` command to Hard-Reset the NodeMCU module using DTR/RTS reset circuit (like NodeMCU DEV Kit)
 * Added: RAW output format to `fsinfo` command - feature requested [on GitHub](https://github.com/AndiDittrich/NodeMCU-Tool/issues/13) #13
 * Added: `--connection-delay` option to fix broken reset circuits which cause a immediate hard-reset on opening the serial connection (dts/rts lines) #14
+* Added: Documentation regarding to [Reset-on-Connect Issues / Broken Reset Circuits](docs/Reset_on_Connect.md)
 * Changed: Default baudrate to **115200** - newer firmware versions using automatic baudrate detection which allows to use higher connection speeds by default
 * Changed: footprints of NodeMCU-Tool.js functions - port/baudrate are set globally by setOptions instead by each function
 * Changed: [logging-facility](https://github.com/AndiDittrich/Node.Logging-Facility) is used for global log output management
diff --git a/README.md b/README.md
index 544f035..3ba655d 100755
--- a/README.md
+++ b/README.md
@@ -38,7 +38,9 @@ Related Documents
 
 * [Common Use-Cases and Examples](docs/Examples.md)
 * [Programmatic Usage](docs/ProgrammaticUsage.md)
+* [Fixing Reset-on-Connect Issue](docs/Reset_on_Connect.md)
 * [Contribution Guidelines](CONTRIBUTE.md)
+* [NodeMCU DEVKIT Schematics](https://github.com/nodemcu/nodemcu-devkit-v1.0/blob/master/NODEMCU_DEVKIT_V1.0.PDF)
 * [Changelog](CHANGES.md)
 * [License](LICENSE.md)
 
diff --git a/docs/Reset_on_Connect.md b/docs/Reset_on_Connect.md
new file mode 100755
index 0000000..96e2233
--- /dev/null
+++ b/docs/Reset_on_Connect.md
@@ -0,0 +1,55 @@
+Fixing Reset-on-Connect Issue / Broken Reset Circuits
+=====================================================
+
+Regarding to Issue #14
+
+Build-In Reset Circuit
+----------------------
+
+The original [NodeMCU DEVKIT](https://github.com/nodemcu/nodemcu-devkit-v1.0) includes a build-in circuit to pull down the reset (RST) and/or flash (GPIO0) pins via the serial connection using the DTR/RTS lines.
+This allows the user to execute a hard-reset or flash command via software.
+
+**Reset Circuit** (from [NodeMCU DEVKIT Schematics](https://github.com/nodemcu/nodemcu-devkit-v1.0/blob/master/NODEMCU_DEVKIT_V1.0.PDF))
+![Reset Circuit of NodeMCU DEVKIT](nodemcu-reset-circuit.jpg)
+
+
+The Issue
+---------------------
+It's a very useful feature, but on some modules these circuits cause a **reset on connect** which make the module inaccessible with NodeMCU-Tool: 
+on opening the serial connection software side, the module will be reset immediately and it reboots. Directly after reboot, the **auto-baudrate** detection of NodeMCU is capturing the serial input to determinate the used baudrate.
+And this is the issue: NodeMCU-Tool sends a few hearbeat messages to the module to check its state, but these messages are list because of the auto-baudrate detection. Therefore the module is threatened as unavailable and a error message is raised. 
+
+This behaviour can be caused by a hardware issue: wrong transistors, wrong series-resistors **or** a usb driver failure, which invokes the DTR/RTS lines asynchronous
+
+**Timeline**
+
+1. **NodeMCU-Tool** is establishing the serial connection
+2. DTR/RTS lines are invoked
+3. NodeMCU will do a hard-reset or go into flash mode
+4. **NodeMCU-Tool** sends heartbeat sequence
+5. NodeMCU Auto-Baudrate Detection is capturing the input or the module is not ready yet the receive incoming data
+6. **NodeMCU-Tool** will not receive the hearbeat response - the module is threatened as unavailable
+
+
+How to fix it
+---------------------
+
+NodeMCU-Tool v2.0.0 includes a special delay flag `--connection-delay N` which waits **N** milliseconds after establishing the connection and sends additional dummy sequences to trigger the auto-baudrate detection.
+
+**Timeline**
+1. **NodeMCU-Tool** establishes the serial connection
+2. **NodeMCU-Tool** is waiting **N** milliseconds until the hard-reset/reboot is done
+3. **NodeMCU** becomes ready and starts the auto-baudrate detection
+4. **NodeMCU-Tool** sends dummy sequence 1 to trigger the auto-baudrate detection
+5. **NodeMCU-Tool** is waiting **N** milliseconds for baudrate detection
+6. **NodeMCU-Tool** sends dummy sequence 2 to trigger the auto-baudrate detection
+7. **NodeMCU-Tool** is waiting **N** milliseconds for baudrate detection
+8. **NodeMCU** set its baudrate based on the previous dummy sequences
+9. **NodeMCU-Tool** starts the regular heartbeat detection
+
+The connection delay is applied 3 times, between each step. A value between **300...500ms** has been approved as best option.
+
+**Example 1**
+```bash
+$ ./nodemcu-tool upload helloworld.lua --connection-delay 300 --baud 115200
+```
diff --git a/docs/nodemcu-reset-circuit.jpg b/docs/nodemcu-reset-circuit.jpg
new file mode 100755
index 0000000..807562e
Binary files /dev/null and b/docs/nodemcu-reset-circuit.jpg differ
diff --git a/lib/NodeMcuConnector.js b/lib/NodeMcuConnector.js
index 26cfc8a..30e3099 100755
--- a/lib/NodeMcuConnector.js
+++ b/lib/NodeMcuConnector.js
@@ -524,7 +524,7 @@ NodeMcuConnector.prototype.deviceInfo = function(showAll, cb){
             // NodeMCU v1.1 - CP2102 Adapter | 0x10c4  Cygnal Integrated Products, Inc
         }else{
             cb(null, ports.filter(function(item){
-                return (item.vendorId == '0x1a86' || item.vendorId == '0x10c4' );
+                return (item.vendorId == '0x1a86' || item.vendorId == '0x10c4');
             }));
         }
     });